/**
* @license AngularJS v1.2.0rc1
* (c) 2010-2012 Google, Inc. http://angularjs.org
* License: MIT
*/
(function(window, document, undefined) {'use strict';
/**
* @description
*
* This object provides a utility for producing rich Error messages within
* Angular. It can be called as follows:
*
* var exampleMinErr = minErr('example');
* throw exampleMinErr('one', 'This {0} is {1}', foo, bar);
*
* The above creates an instance of minErr in the example namespace. The
* resulting error will have a namespaced error code of example.one. The
* resulting error will replace {0} with the value of foo, and {1} with the
* value of bar. The object is not restricted in the number of arguments it can
* take.
*
* If fewer arguments are specified than necessary for interpolation, the extra
* interpolation markers will be preserved in the final string.
*
* Since data will be parsed statically during a build step, some restrictions
* are applied with respect to how minErr instances are created and called.
* Instances should have names of the form namespaceMinErr for a minErr created
* using minErr('namespace') . Error codes, namespaces and template strings
* should all be static strings, not variables or general expressions.
*
* @param {string} module The namespace to use for the new minErr instance.
* @returns {function(string, string, ...): Error} instance
*/
function minErr(module) {
return function () {
var prefix = '[' + (module ? module + ':' : '') + arguments[0] + '] ',
template = arguments[1],
templateArgs = arguments,
message;
message = prefix + template.replace(/\{\d+\}/g, function (match) {
var index = +match.slice(1, -1), arg;
if (index + 2 < templateArgs.length) {
arg = templateArgs[index + 2];
if (isFunction(arg)) {
return arg.toString().replace(/ ?\{[\s\S]*$/, '');
} else if (isUndefined(arg)) {
return 'undefined';
} else if (!isString(arg)) {
return toJson(arg);
}
return arg;
}
return match;
});
return new Error(message);
};
}
////////////////////////////////////
/**
* hasOwnProperty may be overwritten by a property of the same name, or entirely
* absent from an object that does not inherit Object.prototype; this copy is
* used instead
*/
var hasOwnPropertyFn = Object.prototype.hasOwnProperty;
var hasOwnPropertyLocal = function(obj, key) {
return hasOwnPropertyFn.call(obj, key);
};
/**
* @ngdoc function
* @name angular.lowercase
* @function
*
* @description Converts the specified string to lowercase.
* @param {string} string String to be converted to lowercase.
* @returns {string} Lowercased string.
*/
var lowercase = function(string){return isString(string) ? string.toLowerCase() : string;};
/**
* @ngdoc function
* @name angular.uppercase
* @function
*
* @description Converts the specified string to uppercase.
* @param {string} string String to be converted to uppercase.
* @returns {string} Uppercased string.
*/
var uppercase = function(string){return isString(string) ? string.toUpperCase() : string;};
var manualLowercase = function(s) {
return isString(s)
? s.replace(/[A-Z]/g, function(ch) {return String.fromCharCode(ch.charCodeAt(0) | 32);})
: s;
};
var manualUppercase = function(s) {
return isString(s)
? s.replace(/[a-z]/g, function(ch) {return String.fromCharCode(ch.charCodeAt(0) & ~32);})
: s;
};
// String#toLowerCase and String#toUpperCase don't produce correct results in browsers with Turkish
// locale, for this reason we need to detect this case and redefine lowercase/uppercase methods
// with correct but slower alternatives.
if ('i' !== 'I'.toLowerCase()) {
lowercase = manualLowercase;
uppercase = manualUppercase;
}
var /** holds major version number for IE or NaN for real browsers */
msie = int((/msie (\d+)/.exec(lowercase(navigator.userAgent)) || [])[1]),
jqLite, // delay binding since jQuery could be loaded after us.
jQuery, // delay binding
slice = [].slice,
push = [].push,
toString = Object.prototype.toString,
ngMinErr = minErr('ng'),
_angular = window.angular,
/** @name angular */
angular = window.angular || (window.angular = {}),
angularModule,
nodeName_,
uid = ['0', '0', '0'];
/**
* @private
* @param {*} obj
* @return {boolean} Returns true if `obj` is an array or array-like object (NodeList, Arguments, ...)
*/
function isArrayLike(obj) {
if (obj == null || isWindow(obj)) {
return false;
}
var length = obj.length;
if (obj.nodeType === 1 && length) {
return true;
}
return isArray(obj) || !isFunction(obj) && (
length === 0 || typeof length === "number" && length > 0 && (length - 1) in obj
);
}
/**
* @ngdoc function
* @name angular.forEach
* @function
*
* @description
* Invokes the `iterator` function once for each item in `obj` collection, which can be either an
* object or an array. The `iterator` function is invoked with `iterator(value, key)`, where `value`
* is the value of an object property or an array element and `key` is the object property key or
* array element index. Specifying a `context` for the function is optional.
*
* Note: this function was previously known as `angular.foreach`.
*
<pre>
var values = {name: 'misko', gender: 'male'};
var log = [];
angular.forEach(values, function(value, key){
this.push(key + ': ' + value);
}, log);
expect(log).toEqual(['name: misko', 'gender:male']);
</pre>
*
* @param {Object|Array} obj Object to iterate over.
* @param {Function} iterator Iterator function.
* @param {Object=} context Object to become context (`this`) for the iterator function.
* @returns {Object|Array} Reference to `obj`.
*/
function forEach(obj, iterator, context) {
var key;
if (obj) {
if (isFunction(obj)){
for (key in obj) {
if (key != 'prototype' && key != 'length' && key != 'name' && obj.hasOwnProperty(key)) {
iterator.call(context, obj[key], key);
}
}
} else if (obj.forEach && obj.forEach !== forEach) {
obj.forEach(iterator, context);
} else if (isArrayLike(obj)) {
for (key = 0; key < obj.length; key++)
iterator.call(context, obj[key], key);
} else {
for (key in obj) {
if (obj.hasOwnProperty(key)) {
iterator.call(context, obj[key], key);
}
}
}
}
return obj;
}
function sortedKeys(obj) {
var keys = [];
for (var key in obj) {
if (obj.hasOwnProperty(key)) {
keys.push(key);
}
}
return keys.sort();
}
function forEachSorted(obj, iterator, context) {
var keys = sortedKeys(obj);
for ( var i = 0; i < keys.length; i++) {
iterator.call(context, obj[keys[i]], keys[i]);
}
return keys;
}
/**
* when using forEach the params are value, key, but it is often useful to have key, value.
* @param {function(string, *)} iteratorFn
* @returns {function(*, string)}
*/
function reverseParams(iteratorFn) {
return function(value, key) { iteratorFn(key, value) };
}
/**
* A consistent way of creating unique IDs in angular. The ID is a sequence of alpha numeric
* characters such as '012ABC'. The reason why we are not using simply a number counter is that
* the number string gets longer over time, and it can also overflow, where as the nextId
* will grow much slower, it is a string, and it will never overflow.
*
* @returns an unique alpha-numeric string
*/
function nextUid() {
var index = uid.length;
var digit;
while(index) {
index--;
digit = uid[index].charCodeAt(0);
if (digit == 57 /*'9'*/) {
uid[index] = 'A';
return uid.join('');
}
if (digit == 90 /*'Z'*/) {
uid[index] = '0';
} else {
uid[index] = String.fromCharCode(digit + 1);
return uid.join('');
}
}
uid.unshift('0');
return uid.join('');
}
/**
* Set or clear the hashkey for an object.
* @param obj object
* @param h the hashkey (!truthy to delete the hashkey)
*/
function setHashKey(obj, h) {
if (h) {
obj.$$hashKey = h;
}
else {
delete obj.$$hashKey;
}
}
/**
* @ngdoc function
* @name angular.extend
* @function
*
* @description
* Extends the destination object `dst` by copying all of the properties from the `src` object(s)
* to `dst`. You can specify multiple `src` objects.
*
* @param {Object} dst Destination object.
* @param {...Object} src Source object(s).
* @returns {Object} Reference to `dst`.
*/
function extend(dst) {
var h = dst.$$hashKey;
forEach(arguments, function(obj){
if (obj !== dst) {
forEach(obj, function(value, key){
dst[key] = value;
});
}
});
setHashKey(dst,h);
return dst;
}
function int(str) {
return parseInt(str, 10);
}
function inherit(parent, extra) {
return extend(new (extend(function() {}, {prototype:parent}))(), extra);
}
/**
* @ngdoc function
* @name angular.noop
* @function
*
* @description
* A function that performs no operations. This function can be useful when writing code in the
* functional style.
<pre>
function foo(callback) {
var result = calculateResult();
(callback || angular.noop)(result);
}
</pre>
*/
function noop() {}
noop.$inject = [];
/**
* @ngdoc function
* @name angular.identity
* @function
*
* @description
* A function that returns its first argument. This function is useful when writing code in the
* functional style.
*
<pre>
function transformer(transformationFn, value) {
return (transformationFn || angular.identity)(value);
};
</pre>
*/
function identity($) {return $;}
identity.$inject = [];
function valueFn(value) {return function() {return value;};}
/**
* @ngdoc function
* @name angular.isUndefined
* @function
*
* @description
* Determines if a reference is undefined.
*
* @param {*} value Reference to check.
* @returns {boolean} True if `value` is undefined.
*/
function isUndefined(value){return typeof value == 'undefined';}
/**
* @ngdoc function
* @name angular.isDefined
* @function
*
* @description
* Determines if a reference is defined.
*
* @param {*} value Reference to check.
* @returns {boolean} True if `value` is defined.
*/
function isDefined(value){return typeof value != 'undefined';}
/**
* @ngdoc function
* @name angular.isObject
* @function
*
* @description
* Determines if a reference is an `Object`. Unlike `typeof` in JavaScript, `null`s are not
* considered to be objects.
*
* @param {*} value Reference to check.
* @returns {boolean} True if `value` is an `Object` but not `null`.
*/
function isObject(value){return value != null && typeof value == 'object';}
/**
* @ngdoc function
* @name angular.isString
* @function
*
* @description
* Determines if a reference is a `String`.
*
* @param {*} value Reference to check.
* @returns {boolean} True if `value` is a `String`.
*/
function isString(value){return typeof value == 'string';}
/**
* @ngdoc function
* @name angular.isNumber
* @function
*
* @description
* Determines if a reference is a `Number`.
*
* @param {*} value Reference to check.
* @returns {boolean} True if `value` is a `Number`.
*/
function isNumber(value){return typeof value == 'number';}
/**
* @ngdoc function
* @name angular.isDate
* @function
*
* @description
* Determines if a value is a date.
*
* @param {*} value Reference to check.
* @returns {boolean} True if `value` is a `Date`.
*/
function isDate(value){
return toString.apply(value) == '[object Date]';
}
/**
* @ngdoc function
* @name angular.isArray
* @function
*
* @description
* Determines if a reference is an `Array`.
*
* @param {*} value Reference to check.
* @returns {boolean} True if `value` is an `Array`.
*/
function isArray(value) {
return toString.apply(value) == '[object Array]';
}
/**
* @ngdoc function
* @name angular.isFunction
* @function
*
* @description
* Determines if a reference is a `Function`.
*
* @param {*} value Reference to check.
* @returns {boolean} True if `value` is a `Function`.
*/
function isFunction(value){return typeof value == 'function';}
/**
* Determines if a value is a regular expression object.
*
* @private
* @param {*} value Reference to check.
* @returns {boolean} True if `value` is a `RegExp`.
*/
function isRegExp(value) {
return toString.apply(value) == '[object RegExp]';
}
/**
* Checks if `obj` is a window object.
*
* @private
* @param {*} obj Object to check
* @returns {boolean} True if `obj` is a window obj.
*/
function isWindow(obj) {
return obj && obj.document && obj.location && obj.alert && obj.setInterval;
}
function isScope(obj) {
return obj && obj.$evalAsync && obj.$watch;
}
function isFile(obj) {
return toString.apply(obj) === '[object File]';
}
function isBoolean(value) {
return typeof value == 'boolean';
}
var trim = (function() {
// native trim is way faster: http://jsperf.com/angular-trim-test
// but IE doesn't have it... :-(
// TODO: we should move this into IE/ES5 polyfill
if (!String.prototype.trim) {
return function(value) {
return isString(value) ? value.replace(/^\s*/, '').replace(/\s*$/, '') : value;
};
}
return function(value) {
return isString(value) ? value.trim() : value;
};
})();
/**
* @ngdoc function
* @name angular.isElement
* @function
*
* @description
* Determines if a reference is a DOM element (or wrapped jQuery element).
*
* @param {*} value Reference to check.
* @returns {boolean} True if `value` is a DOM element (or wrapped jQuery element).
*/
function isElement(node) {
return node &&
(node.nodeName // we are a direct element
|| (node.on && node.find)); // we have an on and find method part of jQuery API
}
/**
* @param str 'key1,key2,...'
* @returns {object} in the form of {key1:true, key2:true, ...}
*/
function makeMap(str){
var obj = {}, items = str.split(","), i;
for ( i = 0; i < items.length; i++ )
obj[ items[i] ] = true;
return obj;
}
if (msie < 9) {
nodeName_ = function(element) {
element = element.nodeName ? element : element[0];
return (element.scopeName && element.scopeName != 'HTML')
? uppercase(element.scopeName + ':' + element.nodeName) : element.nodeName;
};
} else {
nodeName_ = function(element) {
return element.nodeName ? element.nodeName : element[0].nodeName;
};
}
function map(obj, iterator, context) {
var results = [];
forEach(obj, function(value, index, list) {
results.push(iterator.call(context, value, index, list));
});
return results;
}
/**
* @description
* Determines the number of elements in an array, the number of properties an object has, or
* the length of a string.
*
* Note: This function is used to augment the Object type in Angular expressions. See
* {@link angular.Object} for more information about Angular arrays.
*
* @param {Object|Array|string} obj Object, array, or string to inspect.
* @param {boolean} [ownPropsOnly=false] Count only "own" properties in an object
* @returns {number} The size of `obj` or `0` if `obj` is neither an object nor an array.
*/
function size(obj, ownPropsOnly) {
var size = 0, key;
if (isArray(obj) || isString(obj)) {
return obj.length;
} else if (isObject(obj)){
for (key in obj)
if (!ownPropsOnly || obj.hasOwnProperty(key))
size++;
}
return size;
}
function includes(array, obj) {
return indexOf(array, obj) != -1;
}
function indexOf(array, obj) {
if (array.indexOf) return array.indexOf(obj);
for ( var i = 0; i < array.length; i++) {
if (obj === array[i]) return i;
}
return -1;
}
function arrayRemove(array, value) {
var index = indexOf(array, value);
if (index >=0)
array.splice(index, 1);
return value;
}
function isLeafNode (node) {
if (node) {
switch (node.nodeName) {
case "OPTION":
case "PRE":
case "TITLE":
return true;
}
}
return false;
}
/**
* @ngdoc function
* @name angular.copy
* @function
*
* @description
* Creates a deep copy of `source`, which should be an object or an array.
*
* * If no destination is supplied, a copy of the object or array is created.
* * If a destination is provided, all of its elements (for array) or properties (for objects)
* are deleted and then all elements/properties from the source are copied to it.
* * If `source` is not an object or array, `source` is returned.
*
* Note: this function is used to augment the Object type in Angular expressions. See
* {@link ng.$filter} for more information about Angular arrays.
*
* @param {*} source The source that will be used to make a copy.
* Can be any type, including primitives, `null`, and `undefined`.
* @param {(Object|Array)=} destination Destination into which the source is copied. If
* provided, must be of the same type as `source`.
* @returns {*} The copy or updated `destination`, if `destination` was specified.
*/
function copy(source, destination){
if (isWindow(source) || isScope(source)) {
throw ngMinErr('cpws', "Can't copy! Making copies of Window or Scope instances is not supported.");
}
if (!destination) {
destination = source;
if (source) {
if (isArray(source)) {
destination = copy(source, []);
} else if (isDate(source)) {
destination = new Date(source.getTime());
} else if (isRegExp(source)) {
destination = new RegExp(source.source);
} else if (isObject(source)) {
destination = copy(source, {});
}
}
} else {
if (source === destination) throw ngMinErr('cpi', "Can't copy! Source and destination are identical.");
if (isArray(source)) {
destination.length = 0;
for ( var i = 0; i < source.length; i++) {
destination.push(copy(source[i]));
}
} else {
var h = destination.$$hashKey;
forEach(destination, function(value, key){
delete destination[key];
});
for ( var key in source) {
destination[key] = copy(source[key]);
}
setHashKey(destination,h);
}
}
return destination;
}
/**
* Create a shallow copy of an object
*/
function shallowCopy(src, dst) {
dst = dst || {};
for(var key in src) {
if (src.hasOwnProperty(key) && key.substr(0, 2) !== '$$') {
dst[key] = src[key];
}
}
return dst;
}
/**
* @ngdoc function
* @name angular.equals
* @function
*
* @description
* Determines if two objects or two values are equivalent. Supports value types, regular expressions, arrays and
* objects.
*
* Two objects or values are considered equivalent if at least one of the following is true:
*
* * Both objects or values pass `===` comparison.
* * Both objects or values are of the same type and all of their properties pass `===` comparison.
* * Both values are NaN. (In JavasScript, NaN == NaN => false. But we consider two NaN as equal)
* * Both values represent the same regular expression (In JavasScript,
* /abc/ == /abc/ => false. But we consider two regular expressions as equal when their textual
* representation matches).
*
* During a property comparison, properties of `function` type and properties with names
* that begin with `$` are ignored.
*
* Scope and DOMWindow objects are being compared only by identify (`===`).
*
* @param {*} o1 Object or value to compare.
* @param {*} o2 Object or value to compare.
* @returns {boolean} True if arguments are equal.
*/
function equals(o1, o2) {
if (o1 === o2) return true;
if (o1 === null || o2 === null) return false;
if (o1 !== o1 && o2 !== o2) return true; // NaN === NaN
var t1 = typeof o1, t2 = typeof o2, length, key, keySet;
if (t1 == t2) {
if (t1 == 'object') {
if (isArray(o1)) {
if (!isArray(o2)) return false;
if ((length = o1.length) == o2.length) {
for(key=0; key<length; key++) {
if (!equals(o1[key], o2[key])) return false;
}
return true;
}
} else if (isDate(o1)) {
return isDate(o2) && o1.getTime() == o2.getTime();
} else if (isRegExp(o1) && isRegExp(o2)) {
return o1.toString() == o2.toString();
} else {
if (isScope(o1) || isScope(o2) || isWindow(o1) || isWindow(o2) || isArray(o2)) return false;
keySet = {};
for(key in o1) {
if (key.charAt(0) === '$' || isFunction(o1[key])) continue;
if (!equals(o1[key], o2[key])) return false;
keySet[key] = true;
}
for(key in o2) {
if (!keySet.hasOwnProperty(key) &&
key.charAt(0) !== '$' &&
o2[key] !== undefined &&
!isFunction(o2[key])) return false;
}
return true;
}
}
}
return false;
}
function concat(array1, array2, index) {
return array1.concat(slice.call(array2, index));
}
function sliceArgs(args, startIndex) {
return slice.call(args, startIndex || 0);
}
/**
* @ngdoc function
* @name angular.bind
* @function
*
* @description
* Returns a function which calls function `fn` bound to `self` (`self` becomes the `this` for
* `fn`). You can supply optional `args` that are prebound to the function. This feature is also
* known as [function currying](http://en.wikipedia.org/wiki/Currying).
*
* @param {Object} self Context which `fn` should be evaluated in.
* @param {function()} fn Function to be bound.
* @param {...*} args Optional arguments to be prebound to the `fn` function call.
* @returns {function()} Function that wraps the `fn` with all the specified bindings.
*/
function bind(self, fn) {
var curryArgs = arguments.length > 2 ? sliceArgs(arguments, 2) : [];
if (isFunction(fn) && !(fn instanceof RegExp)) {
return curryArgs.length
? function() {
return arguments.length
? fn.apply(self, curryArgs.concat(slice.call(arguments, 0)))
: fn.apply(self, curryArgs);
}
: function() {
return arguments.length
? fn.apply(self, arguments)
: fn.call(self);
};
} else {
// in IE, native methods are not functions so they cannot be bound (note: they don't need to be)
return fn;
}
}
function toJsonReplacer(key, value) {
var val = value;
if (/^\$+/.test(key)) {
val = undefined;
} else if (isWindow(value)) {
val = '$WINDOW';
} else if (value && document === value) {
val = '$DOCUMENT';
} else if (isScope(value)) {
val = '$SCOPE';
}
return val;
}
/**
* @ngdoc function
* @name angular.toJson
* @function
*
* @description
* Serializes input into a JSON-formatted string. Properties with leading $ characters will be
* stripped since angular uses this notation internally.
*
* @param {Object|Array|Date|string|number} obj Input to be serialized into JSON.
* @param {boolean=} pretty If set to true, the JSON output will contain newlines and whitespace.
* @returns {string|undefined} JSON-ified string representing `obj`.
*/
function toJson(obj, pretty) {
if (typeof obj === 'undefined') return undefined;
return JSON.stringify(obj, toJsonReplacer, pretty ? ' ' : null);
}
/**
* @ngdoc function
* @name angular.fromJson
* @function
*
* @description
* Deserializes a JSON string.
*
* @param {string} json JSON string to deserialize.
* @returns {Object|Array|Date|string|number} Deserialized thingy.
*/
function fromJson(json) {
return isString(json)
? JSON.parse(json)
: json;
}
function toBoolean(value) {
if (value && value.length !== 0) {
var v = lowercase("" + value);
value = !(v == 'f' || v == '0' || v == 'false' || v == 'no' || v == 'n' || v == '[]');
} else {
value = false;
}
return value;
}
/**
* @returns {string} Returns the string representation of the element.
*/
function startingTag(element) {
element = jqLite(element).clone();
try {
// turns out IE does not let you set .html() on elements which
// are not allowed to have children. So we just ignore it.
element.html('');
} catch(e) {}
// As Per DOM Standards
var TEXT_NODE = 3;
var elemHtml = jqLite('<div>').append(element).html();
try {
return element[0].nodeType === TEXT_NODE ? lowercase(elemHtml) :
elemHtml.
match(/^(<[^>]+>)/)[1].
replace(/^<([\w\-]+)/, function(match, nodeName) { return '<' + lowercase(nodeName); });
} catch(e) {
return lowercase(elemHtml);
}
}
/////////////////////////////////////////////////
/**
* Tries to decode the URI component without throwing an exception.
*
* @private
* @param str value potential URI component to check.
* @returns {boolean} True if `value` can be decoded
* with the decodeURIComponent function.
*/
function tryDecodeURIComponent(value) {
try {
return decodeURIComponent(value);
} catch(e) {
// Ignore any invalid uri component
}
}
/**
* Parses an escaped url query string into key-value pairs.
* @returns Object.<(string|boolean)>
*/
function parseKeyValue(/**string*/keyValue) {
var obj = {}, key_value, key;
forEach((keyValue || "").split('&'), function(keyValue){
if ( keyValue ) {
key_value = keyValue.split('=');
key = tryDecodeURIComponent(key_value[0]);
if ( isDefined(key) ) {
var val = isDefined(key_value[1]) ? tryDecodeURIComponent(key_value[1]) : true;
if (!obj[key]) {
obj[key] = val;
} else if(isArray(obj[key])) {
obj[key].push(val);
} else {
obj[key] = [obj[key],val];
}
}
}
});
return obj;
}
function toKeyValue(obj) {
var parts = [];
forEach(obj, function(value, key) {
if (isArray(value)) {
forEach(value, function(arrayValue) {
parts.push(encodeUriQuery(key, true) + (arrayValue === true ? '' : '=' + encodeUriQuery(arrayValue, true)));
});
} else {
parts.push(encodeUriQuery(key, true) + (value === true ? '' : '=' + encodeUriQuery(value, true)));
}
});
return parts.length ? parts.join('&') : '';
}
/**
* We need our custom method because encodeURIComponent is too aggressive and doesn't follow
* http://www.ietf.org/rfc/rfc3986.txt with regards to the character set (pchar) allowed in path
* segments:
* segment = *pchar
* pchar = unreserved / pct-encoded / sub-delims / ":" / "@"
* pct-encoded = "%" HEXDIG HEXDIG
* unreserved = ALPHA / DIGIT / "-" / "." / "_" / "~"
* sub-delims = "!" / "$" / "&" / "'" / "(" / ")"
* / "*" / "+" / "," / ";" / "="
*/
function encodeUriSegment(val) {
return encodeUriQuery(val, true).
replace(/%26/gi, '&').
replace(/%3D/gi, '=').
replace(/%2B/gi, '+');
}
/**
* This method is intended for encoding *key* or *value* parts of query component. We need a custom
* method because encodeURIComponent is too aggressive and encodes stuff that doesn't have to be
* encoded per http://tools.ietf.org/html/rfc3986:
* query = *( pchar / "/" / "?" )
* pchar = unreserved / pct-encoded / sub-delims / ":" / "@"
* unreserved = ALPHA / DIGIT / "-" / "." / "_" / "~"
* pct-encoded = "%" HEXDIG HEXDIG
* sub-delims = "!" / "$" / "&" / "'" / "(" / ")"
* / "*" / "+" / "," / ";" / "="
*/
function encodeUriQuery(val, pctEncodeSpaces) {
return encodeURIComponent(val).
replace(/%40/gi, '@').
replace(/%3A/gi, ':').
replace(/%24/g, '$').
replace(/%2C/gi, ',').
replace(/%20/g, (pctEncodeSpaces ? '%20' : '+'));
}
/**
* @ngdoc directive
* @name ng.directive:ngApp
*
* @element ANY
* @param {angular.Module} ngApp an optional application
* {@link angular.module module} name to load.
*
* @description
*
* Use this directive to auto-bootstrap an application. Only
* one ngApp directive can be used per HTML document. The directive
* designates the root of the application and is typically placed
* at the root of the page.
*
* The first ngApp found in the document will be auto-bootstrapped. To use multiple applications in an
* HTML document you must manually bootstrap them using {@link angular.bootstrap}.
* Applications cannot be nested.
*
* In the example below if the `ngApp` directive would not be placed
* on the `html` element then the document would not be compiled
* and the `{{ 1+2 }}` would not be resolved to `3`.
*
* `ngApp` is the easiest way to bootstrap an application.
*
<doc:example>
<doc:source>
I can add: 1 + 2 = {{ 1+2 }}
</doc:source>
</doc:example>
*
*/
function angularInit(element, bootstrap) {
var elements = [element],
appElement,
module,
names = ['ng:app', 'ng-app', 'x-ng-app', 'data-ng-app'],
NG_APP_CLASS_REGEXP = /\sng[:\-]app(:\s*([\w\d_]+);?)?\s/;
function append(element) {
element && elements.push(element);
}
forEach(names, function(name) {
names[name] = true;
append(document.getElementById(name));
name = name.replace(':', '\\:');
if (element.querySelectorAll) {
forEach(element.querySelectorAll('.' + name), append);
forEach(element.querySelectorAll('.' + name + '\\:'), append);
forEach(element.querySelectorAll('[' + name + ']'), append);
}
});
forEach(elements, function(element) {
if (!appElement) {
var className = ' ' + element.className + ' ';
var match = NG_APP_CLASS_REGEXP.exec(className);
if (match) {
appElement = element;
module = (match[2] || '').replace(/\s+/g, ',');
} else {
forEach(element.attributes, function(attr) {
if (!appElement && names[attr.name]) {
appElement = element;
module = attr.value;
}
});
}
}
});
if (appElement) {
bootstrap(appElement, module ? [module] : []);
}
}
/**
* @ngdoc function
* @name angular.bootstrap
* @description
* Use this function to manually start up angular application.
*
* See: {@link guide/bootstrap Bootstrap}
*
* Note that ngScenario-based end-to-end tests cannot use this function to bootstrap manually.
* They must use {@link api/ng.directive:ngApp ngApp}.
*
* @param {Element} element DOM element which is the root of angular application.
* @param {Array<String|Function>=} modules an array of module declarations. See: {@link angular.module modules}
* @returns {AUTO.$injector} Returns the newly created injector for this app.
*/
function bootstrap(element, modules) {
var doBootstrap = function() {
element = jqLite(element);
if (element.injector()) {
var tag = (element[0] === document) ? 'document' : startingTag(element);
throw ngMinErr('btstrpd', "App Already Bootstrapped with this Element '{0}'", tag);
}
modules = modules || [];
modules.unshift(['$provide', function($provide) {
$provide.value('$rootElement', element);
}]);
modules.unshift('ng');
var injector = createInjector(modules);
injector.invoke(['$rootScope', '$rootElement', '$compile', '$injector', '$animate',
function(scope, element, compile, injector, animate) {
scope.$apply(function() {
element.data('$injector', injector);
compile(element)(scope);
});
animate.enabled(true);
}]
);
return injector;
};
var NG_DEFER_BOOTSTRAP = /^NG_DEFER_BOOTSTRAP!/;
if (window && !NG_DEFER_BOOTSTRAP.test(window.name)) {
return doBootstrap();
}
window.name = window.name.replace(NG_DEFER_BOOTSTRAP, '');
angular.resumeBootstrap = function(extraModules) {
forEach(extraModules, function(module) {
modules.push(module);
});
doBootstrap();
};
}
var SNAKE_CASE_REGEXP = /[A-Z]/g;
function snake_case(name, separator){
separator = separator || '_';
return name.replace(SNAKE_CASE_REGEXP, function(letter, pos) {
return (pos ? separator : '') + letter.toLowerCase();
});
}
function bindJQuery() {
// bind to jQuery if present;
jQuery = window.jQuery;
// reset to jQuery or default to us.
if (jQuery) {
jqLite = jQuery;
extend(jQuery.fn, {
scope: JQLitePrototype.scope,
controller: JQLitePrototype.controller,
injector: JQLitePrototype.injector,
inheritedData: JQLitePrototype.inheritedData
});
// Method signature: JQLitePatchJQueryRemove(name, dispatchThis, filterElems, getterIfNoArguments)
JQLitePatchJQueryRemove('remove', true, true, false);
JQLitePatchJQueryRemove('empty', false, false, false);
JQLitePatchJQueryRemove('html', false, false, true);
} else {
jqLite = JQLite;
}
angular.element = jqLite;
}
/**
* throw error if the argument is falsy.
*/
function assertArg(arg, name, reason) {
if (!arg) {
throw ngMinErr('areq', "Argument '{0}' is {1}", (name || '?'), (reason || "required"));
}
return arg;
}
function assertArgFn(arg, name, acceptArrayAnnotation) {
if (acceptArrayAnnotation && isArray(arg)) {
arg = arg[arg.length - 1];
}
assertArg(isFunction(arg), name, 'not a function, got ' +
(arg && typeof arg == 'object' ? arg.constructor.name || 'Object' : typeof arg));
return arg;
}
/**
* Return the value accessible from the object by path. Any undefined traversals are ignored
* @param {Object} obj starting object
* @param {string} path path to traverse
* @param {boolean=true} bindFnToScope
* @returns value as accessible by path
*/
//TODO(misko): this function needs to be removed
function getter(obj, path, bindFnToScope) {
if (!path) return obj;
var keys = path.split('.');
var key;
var lastInstance = obj;
var len = keys.length;
for (var i = 0; i < len; i++) {
key = keys[i];
if (obj) {
obj = (lastInstance = obj)[key];
}
}
if (!bindFnToScope && isFunction(obj)) {
return bind(lastInstance, obj);
}
return obj;
}
/**
* @ngdoc interface
* @name angular.Module
* @description
*
* Interface for configuring angular {@link angular.module modules}.
*/
function setupModuleLoader(window) {
function ensure(obj, name, factory) {
return obj[name] || (obj[name] = factory());
}
return ensure(ensure(window, 'angular', Object), 'module', function() {
/** @type {Object.<string, angular.Module>} */
var modules = {};
/**
* @ngdoc function
* @name angular.module
* @description
*
* The `angular.module` is a global place for creating and registering Angular modules. All
* modules (angular core or 3rd party) that should be available to an application must be
* registered using this mechanism.
*
*
* # Module
*
* A module is a collection of services, directives, filters, and configuration information.
* `angular.module` is used to configure the {@link AUTO.$injector $injector}.
*
* <pre>
* // Create a new module
* var myModule = angular.module('myModule', []);
*
* // register a new service
* myModule.value('appName', 'MyCoolApp');
*
* // configure existing services inside initialization blocks.
* myModule.config(function($locationProvider) {
* // Configure existing providers
* $locationProvider.hashPrefix('!');
* });
* </pre>
*
* Then you can create an injector and load your modules like this:
*
* <pre>
* var injector = angular.injector(['ng', 'MyModule'])
* </pre>
*
* However it's more likely that you'll just use
* {@link ng.directive:ngApp ngApp} or
* {@link angular.bootstrap} to simplify this process for you.
*
* @param {!string} name The name of the module to create or retrieve.
* @param {Array.<string>=} requires If specified then new module is being created. If unspecified then the
* the module is being retrieved for further configuration.
* @param {Function} configFn Optional configuration function for the module. Same as
* {@link angular.Module#config Module#config()}.
* @returns {module} new module with the {@link angular.Module} api.
*/
return function module(name, requires, configFn) {
if (requires && modules.hasOwnProperty(name)) {
modules[name] = null;
}
return ensure(modules, name, function() {
if (!requires) {
throw minErr('$injector')('nomod', "Module '{0}' is not available! You either misspelled the module name " +
"or forgot to load it. If registering a module ensure that you specify the dependencies as the second " +
"argument.", name);
}
/** @type {!Array.<Array.<*>>} */
var invokeQueue = [];
/** @type {!Array.<Function>} */
var runBlocks = [];
var config = invokeLater('$injector', 'invoke');
/** @type {angular.Module} */
var moduleInstance = {
// Private state
_invokeQueue: invokeQueue,
_runBlocks: runBlocks,
/**
* @ngdoc property
* @name angular.Module#requires
* @propertyOf angular.Module
* @returns {Array.<string>} List of module names which must be loaded before this module.
* @description
* Holds the list of modules which the injector will load before the current module is loaded.
*/
requires: requires,
/**
* @ngdoc property
* @name angular.Module#name
* @propertyOf angular.Module
* @returns {string} Name of the module.
* @description
*/
name: name,
/**
* @ngdoc method
* @name angular.Module#provider
* @methodOf angular.Module
* @param {string} name service name
* @param {Function} providerType Construction function for creating new instance of the service.
* @description
* See {@link AUTO.$provide#provider $provide.provider()}.
*/
provider: invokeLater('$provide', 'provider'),
/**
* @ngdoc method
* @name angular.Module#factory
* @methodOf angular.Module
* @param {string} name service name
* @param {Function} providerFunction Function for creating new instance of the service.
* @description
* See {@link AUTO.$provide#factory $provide.factory()}.
*/
factory: invokeLater('$provide', 'factory'),
/**
* @ngdoc method
* @name angular.Module#service
* @methodOf angular.Module
* @param {string} name service name
* @param {Function} constructor A constructor function that will be instantiated.
* @description
* See {@link AUTO.$provide#service $provide.service()}.
*/
service: invokeLater('$provide', 'service'),
/**
* @ngdoc method
* @name angular.Module#value
* @methodOf angular.Module
* @param {string} name service name
* @param {*} object Service instance object.
* @description
* See {@link AUTO.$provide#value $provide.value()}.
*/
value: invokeLater('$provide', 'value'),
/**
* @ngdoc method
* @name angular.Module#constant
* @methodOf angular.Module
* @param {string} name constant name
* @param {*} object Constant value.
* @description
* Because the constant are fixed, they get applied before other provide methods.
* See {@link AUTO.$provide#constant $provide.constant()}.
*/
constant: invokeLater('$provide', 'constant', 'unshift'),
/**
* @ngdoc method
* @name angular.Module#animation
* @methodOf angular.Module
* @param {string} name animation name
* @param {Function} animationFactory Factory function for creating new instance of an animation.
* @description
*
* **NOTE**: animations are take effect only if the **ngAnimate** module is loaded.
*
*
* Defines an animation hook that can be later used with {@link ngAnimate.$animate $animate} service and
* directives that use this service.
*
* <pre>
* module.animation('.animation-name', function($inject1, $inject2) {
* return {
* eventName : function(element, done) {
* //code to run the animation
* //once complete, then run done()
* return function cancellationFunction(element) {
* //code to cancel the animation
* }
* }
* }
* })
* </pre>
*
* See {@link ngAnimate.$animateProvider#register $animateProvider.register()} and
* {@link ngAnimate ngAnimate module} for more information.
*/
animation: invokeLater('$animateProvider', 'register'),
/**
* @ngdoc method
* @name angular.Module#filter
* @methodOf angular.Module
* @param {string} name Filter name.
* @param {Function} filterFactory Factory function for creating new instance of filter.
* @description
* See {@link ng.$filterProvider#register $filterProvider.register()}.
*/
filter: invokeLater('$filterProvider', 'register'),
/**
* @ngdoc method
* @name angular.Module#controller
* @methodOf angular.Module
* @param {string} name Controller name.
* @param {Function} constructor Controller constructor function.
* @description
* See {@link ng.$controllerProvider#register $controllerProvider.register()}.
*/
controller: invokeLater('$controllerProvider', 'register'),
/**
* @ngdoc method
* @name angular.Module#directive
* @methodOf angular.Module
* @param {string} name directive name
* @param {Function} directiveFactory Factory function for creating new instance of
* directives.
* @description
* See {@link ng.$compileProvider#directive $compileProvider.directive()}.
*/
directive: invokeLater('$compileProvider', 'directive'),
/**
* @ngdoc method
* @name angular.Module#config
* @methodOf angular.Module
* @param {Function} configFn Execute this function on module load. Useful for service
* configuration.
* @description
* Use this method to register work which needs to be performed on module loading.
*/
config: config,
/**
* @ngdoc method
* @name angular.Module#run
* @methodOf angular.Module
* @param {Function} initializationFn Execute this function after injector creation.
* Useful for application initialization.
* @description
* Use this method to register work which should be performed when the injector is done
* loading all modules.
*/
run: function(block) {
runBlocks.push(block);
return this;
}
};
if (configFn) {
config(configFn);
}
return moduleInstance;
/**
* @param {string} provider
* @param {string} method
* @param {String=} insertMethod
* @returns {angular.Module}
*/
function invokeLater(provider, method, insertMethod) {
return function() {
invokeQueue[insertMethod || 'push']([provider, method, arguments]);
return moduleInstance;
}
}
});
};
});
}
/**
* @ngdoc property
* @name angular.version
* @description
* An object that contains information about the current AngularJS version. This object has the
* following properties:
*
* - `full` – `{string}` – Full version string, such as "0.9.18".
* - `major` – `{number}` – Major version number, such as "0".
* - `minor` – `{number}` – Minor version number, such as "9".
* - `dot` – `{number}` – Dot version number, such as "18".
* - `codeName` – `{string}` – Code name of the release, such as "jiggling-armfat".
*/
var version = {
full: '1.2.0rc1', // all of these placeholder strings will be replaced by grunt's
major: 1, // package task
minor: 2,
dot: 0,
codeName: 'spooky-giraffe'
};
function publishExternalAPI(angular){
extend(angular, {
'bootstrap': bootstrap,
'copy': copy,
'extend': extend,
'equals': equals,
'element': jqLite,
'forEach': forEach,
'injector': createInjector,
'noop':noop,
'bind':bind,
'toJson': toJson,
'fromJson': fromJson,
'identity':identity,
'isUndefined': isUndefined,
'isDefined': isDefined,
'isString': isString,
'isFunction': isFunction,
'isObject': isObject,
'isNumber': isNumber,
'isElement': isElement,
'isArray': isArray,
'$$minErr': minErr,
'version': version,
'isDate': isDate,
'lowercase': lowercase,
'uppercase': uppercase,
'callbacks': {counter: 0}
});
angularModule = setupModuleLoader(window);
try {
angularModule('ngLocale');
} catch (e) {
angularModule('ngLocale', []).provider('$locale', $LocaleProvider);
}
angularModule('ng', ['ngLocale'], ['$provide',
function ngModule($provide) {
$provide.provider('$compile', $CompileProvider).
directive({
a: htmlAnchorDirective,
input: inputDirective,
textarea: inputDirective,
form: formDirective,
script: scriptDirective,
select: selectDirective,
style: styleDirective,
option: optionDirective,
ngBind: ngBindDirective,
ngBindHtml: ngBindHtmlDirective,
ngBindTemplate: ngBindTemplateDirective,
ngClass: ngClassDirective,
ngClassEven: ngClassEvenDirective,
ngClassOdd: ngClassOddDirective,
ngCsp: ngCspDirective,
ngCloak: ngCloakDirective,
ngController: ngControllerDirective,
ngForm: ngFormDirective,
ngHide: ngHideDirective,
ngIf: ngIfDirective,
ngInclude: ngIncludeDirective,
ngInit: ngInitDirective,
ngNonBindable: ngNonBindableDirective,
ngPluralize: ngPluralizeDirective,
ngRepeat: ngRepeatDirective,
ngShow: ngShowDirective,
ngStyle: ngStyleDirective,
ngSwitch: ngSwitchDirective,
ngSwitchWhen: ngSwitchWhenDirective,
ngSwitchDefault: ngSwitchDefaultDirective,
ngOptions: ngOptionsDirective,
ngTransclude: ngTranscludeDirective,
ngModel: ngModelDirective,
ngList: ngListDirective,
ngChange: ngChangeDirective,
required: requiredDirective,
ngRequired: requiredDirective,
ngValue: ngValueDirective
}).
directive(ngAttributeAliasDirectives).
directive(ngEventDirectives);
$provide.provider({
$anchorScroll: $AnchorScrollProvider,
$animate: $AnimateProvider,
$browser: $BrowserProvider,
$cacheFactory: $CacheFactoryProvider,
$controller: $ControllerProvider,
$document: $DocumentProvider,
$exceptionHandler: $ExceptionHandlerProvider,
$filter: $FilterProvider,
$interpolate: $InterpolateProvider,
$http: $HttpProvider,
$httpBackend: $HttpBackendProvider,
$location: $LocationProvider,
$log: $LogProvider,
$parse: $ParseProvider,
$rootScope: $RootScopeProvider,
$q: $QProvider,
$sce: $SceProvider,
$sceDelegate: $SceDelegateProvider,
$sniffer: $SnifferProvider,
$templateCache: $TemplateCacheProvider,
$timeout: $TimeoutProvider,
$window: $WindowProvider,
$$urlUtils: $$UrlUtilsProvider
});
}
]);
}
//////////////////////////////////
//JQLite
//////////////////////////////////
/**
* @ngdoc function
* @name angular.element
* @function
*
* @description
* Wraps a raw DOM element or HTML string as a [jQuery](http://jquery.com) element.
* `angular.element` can be either an alias for [jQuery](http://api.jquery.com/jQuery/) function, if
* jQuery is available, or a function that wraps the element or string in Angular's jQuery lite
* implementation (commonly referred to as jqLite).
*
* Real jQuery always takes precedence over jqLite, provided it was loaded before `DOMContentLoaded`
* event fired.
*
* jqLite is a tiny, API-compatible subset of jQuery that allows
* Angular to manipulate the DOM. jqLite implements only the most commonly needed functionality
* within a very small footprint, so only a subset of the jQuery API - methods, arguments and
* invocation styles - are supported.
*
* Note: All element references in Angular are always wrapped with jQuery or jqLite; they are never
* raw DOM references.
*
* ## Angular's jqLite
* Angular's lite version of jQuery provides only the following jQuery methods:
*
* - [addClass()](http://api.jquery.com/addClass/)
* - [after()](http://api.jquery.com/after/)
* - [append()](http://api.jquery.com/append/)
* - [attr()](http://api.jquery.com/attr/)
* - [bind()](http://api.jquery.com/on/) - Does not support namespaces, selectors or eventData
* - [children()](http://api.jquery.com/children/) - Does not support selectors
* - [clone()](http://api.jquery.com/clone/)
* - [contents()](http://api.jquery.com/contents/)
* - [css()](http://api.jquery.com/css/)
* - [data()](http://api.jquery.com/data/)
* - [eq()](http://api.jquery.com/eq/)
* - [find()](http://api.jquery.com/find/) - Limited to lookups by tag name
* - [hasClass()](http://api.jquery.com/hasClass/)
* - [html()](http://api.jquery.com/html/)
* - [next()](http://api.jquery.com/next/) - Does not support selectors
* - [on()](http://api.jquery.com/on/) - Does not support namespaces, selectors or eventData
* - [off()](http://api.jquery.com/off/) - Does not support namespaces or selectors
* - [parent()](http://api.jquery.com/parent/) - Does not support selectors
* - [prepend()](http://api.jquery.com/prepend/)
* - [prop()](http://api.jquery.com/prop/)
* - [ready()](http://api.jquery.com/ready/)
* - [remove()](http://api.jquery.com/remove/)
* - [removeAttr()](http://api.jquery.com/removeAttr/)
* - [removeClass()](http://api.jquery.com/removeClass/)
* - [removeData()](http://api.jquery.com/removeData/)
* - [replaceWith()](http://api.jquery.com/replaceWith/)
* - [text()](http://api.jquery.com/text/)
* - [toggleClass()](http://api.jquery.com/toggleClass/)
* - [triggerHandler()](http://api.jquery.com/triggerHandler/) - Passes a dummy event object to handlers.
* - [unbind()](http://api.jquery.com/off/) - Does not support namespaces
* - [val()](http://api.jquery.com/val/)
* - [wrap()](http://api.jquery.com/wrap/)
*
* ## jQuery/jqLite Extras
* Angular also provides the following additional methods and events to both jQuery and jqLite:
*
* ### Events
* - `$destroy` - AngularJS intercepts all jqLite/jQuery's DOM destruction apis and fires this event
* on all DOM nodes being removed. This can be used to clean up and 3rd party bindings to the DOM
* element before it is removed.
* ### Methods
* - `controller(name)` - retrieves the controller of the current element or its parent. By default
* retrieves controller associated with the `ngController` directive. If `name` is provided as
* camelCase directive name, then the controller for this directive will be retrieved (e.g.
* `'ngModel'`).
* - `injector()` - retrieves the injector of the current element or its parent.
* - `scope()` - retrieves the {@link api/ng.$rootScope.Scope scope} of the current
* element or its parent.
* - `inheritedData()` - same as `data()`, but walks up the DOM until a value is found or the top
* parent element is reached.
*
* @param {string|DOMElement} element HTML string or DOMElement to be wrapped into jQuery.
* @returns {Object} jQuery object.
*/
var jqCache = JQLite.cache = {},
jqName = JQLite.expando = 'ng-' + new Date().getTime(),
jqId = 1,
addEventListenerFn = (window.document.addEventListener
? function(element, type, fn) {element.addEventListener(type, fn, false);}
: function(element, type, fn) {element.attachEvent('on' + type, fn);}),
removeEventListenerFn = (window.document.removeEventListener
? function(element, type, fn) {element.removeEventListener(type, fn, false); }
: function(element, type, fn) {element.detachEvent('on' + type, fn); });
function jqNextId() { return ++jqId; }
var SPECIAL_CHARS_REGEXP = /([\:\-\_]+(.))/g;
var MOZ_HACK_REGEXP = /^moz([A-Z])/;
var jqLiteMinErr = minErr('jqLite');
/**
* Converts snake_case to camelCase.
* Also there is special case for Moz prefix starting with upper case letter.
* @param name Name to normalize
*/
function camelCase(name) {
return name.
replace(SPECIAL_CHARS_REGEXP, function(_, separator, letter, offset) {
return offset ? letter.toUpperCase() : letter;
}).
replace(MOZ_HACK_REGEXP, 'Moz$1');
}
/////////////////////////////////////////////
// jQuery mutation patch
//
// In conjunction with bindJQuery intercepts all jQuery's DOM destruction apis and fires a
// $destroy event on all DOM nodes being removed.
//
/////////////////////////////////////////////
function JQLitePatchJQueryRemove(name, dispatchThis, filterElems, getterIfNoArguments) {
var originalJqFn = jQuery.fn[name];
originalJqFn = originalJqFn.$original || originalJqFn;
removePatch.$original = originalJqFn;
jQuery.fn[name] = removePatch;
function removePatch(param) {
var list = filterElems && param ? [this.filter(param)] : [this],
fireEvent = dispatchThis,
set, setIndex, setLength,
element, childIndex, childLength, children;
if (!getterIfNoArguments || param != null) {
while(list.length) {
set = list.shift();
for(setIndex = 0, setLength = set.length; setIndex < setLength; setIndex++) {
element = jqLite(set[setIndex]);
if (fireEvent) {
element.triggerHandler('$destroy');
} else {
fireEvent = !fireEvent;
}
for(childIndex = 0, childLength = (children = element.children()).length;
childIndex < childLength;
childIndex++) {
list.push(jQuery(children[childIndex]));
}
}
}
}
return originalJqFn.apply(this, arguments);
}
}
/////////////////////////////////////////////
function JQLite(element) {
if (element instanceof JQLite) {
return element;
}
if (!(this instanceof JQLite)) {
if (isString(element) && element.charAt(0) != '<') {
throw jqLiteMinErr('nosel', 'Looking up elements via selectors is not supported by jqLite! See: http://docs.angularjs.org/api/angular.element');
}
return new JQLite(element);
}
if (isString(element)) {
var div = document.createElement('div');
// Read about the NoScope elements here:
// http://msdn.microsoft.com/en-us/library/ms533897(VS.85).aspx
div.innerHTML = '<div> </div>' + element; // IE insanity to make NoScope elements work!
div.removeChild(div.firstChild); // remove the superfluous div
JQLiteAddNodes(this, div.childNodes);
var fragment = jqLite(document.createDocumentFragment());
fragment.append(this); // detach the elements from the temporary DOM div.
} else {
JQLiteAddNodes(this, element);
}
}
function JQLiteClone(element) {
return element.cloneNode(true);
}
function JQLiteDealoc(element){
JQLiteRemoveData(element);
for ( var i = 0, children = element.childNodes || []; i < children.length; i++) {
JQLiteDealoc(children[i]);
}
}
function JQLiteOff(element, type, fn, unsupported) {
if (isDefined(unsupported)) throw jqLiteMinErr('offargs', 'jqLite#off() does not support the `selector` argument');
var events = JQLiteExpandoStore(element, 'events'),
handle = JQLiteExpandoStore(element, 'handle');
if (!handle) return; //no listeners registered
if (isUndefined(type)) {
forEach(events, function(eventHandler, type) {
removeEventListenerFn(element, type, eventHandler);
delete events[type];
});
} else {
forEach(type.split(' '), function(type) {
if (isUndefined(fn)) {
removeEventListenerFn(element, type, events[type]);
delete events[type];
} else {
arrayRemove(events[type] || [], fn);
}
});
}
}
function JQLiteRemoveData(element, name) {
var expandoId = element[jqName],
expandoStore = jqCache[expandoId];
if (expandoStore) {
if (name) {
delete jqCache[expandoId].data[name];
return;
}
if (expandoStore.handle) {
expandoStore.events.$destroy && expandoStore.handle({}, '$destroy');
JQLiteOff(element);
}
delete jqCache[expandoId];
element[jqName] = undefined; // ie does not allow deletion of attributes on elements.
}
}
function JQLiteExpandoStore(element, key, value) {
var expandoId = element[jqName],
expandoStore = jqCache[expandoId || -1];
if (isDefined(value)) {
if (!expandoStore) {
element[jqName] = expandoId = jqNextId();
expandoStore = jqCache[expandoId] = {};
}
expandoStore[key] = value;
} else {
return expandoStore && expandoStore[key];
}
}
function JQLiteData(element, key, value) {
var data = JQLiteExpandoStore(element, 'data'),
isSetter = isDefined(value),
keyDefined = !isSetter && isDefined(key),
isSimpleGetter = keyDefined && !isObject(key);
if (!data && !isSimpleGetter) {
JQLiteExpandoStore(element, 'data', data = {});
}
if (isSetter) {
data[key] = value;
} else {
if (keyDefined) {
if (isSimpleGetter) {
// don't create data in this case.
return data && data[key];
} else {
extend(data, key);
}
} else {
return data;
}
}
}
function JQLiteHasClass(element, selector) {
return ((" " + element.className + " ").replace(/[\n\t]/g, " ").
indexOf( " " + selector + " " ) > -1);
}
function JQLiteRemoveClass(element, cssClasses) {
if (cssClasses) {
forEach(cssClasses.split(' '), function(cssClass) {
element.className = trim(
(" " + element.className + " ")
.replace(/[\n\t]/g, " ")
.replace(" " + trim(cssClass) + " ", " ")
);
});
}
}
function JQLiteAddClass(element, cssClasses) {
if (cssClasses) {
forEach(cssClasses.split(' '), function(cssClass) {
if (!JQLiteHasClass(element, cssClass)) {
element.className = trim(element.className + ' ' + trim(cssClass));
}
});
}
}
function JQLiteAddNodes(root, elements) {
if (elements) {
elements = (!elements.nodeName && isDefined(elements.length) && !isWindow(elements))
? elements
: [ elements ];
for(var i=0; i < elements.length; i++) {
root.push(elements[i]);
}
}
}
function JQLiteController(element, name) {
return JQLiteInheritedData(element, '$' + (name || 'ngController' ) + 'Controller');
}
function JQLiteInheritedData(element, name, value) {
element = jqLite(element);
// if element is the document object work with the html element instead
// this makes $(document).scope() possible
if(element[0].nodeType == 9) {
element = element.find('html');
}
while (element.length) {
if ((value = element.data(name)) !== undefined) return value;
element = element.parent();
}
}
//////////////////////////////////////////
// Functions which are declared directly.
//////////////////////////////////////////
var JQLitePrototype = JQLite.prototype = {
ready: function(fn) {
var fired = false;
function trigger() {
if (fired) return;
fired = true;
fn();
}
// check if document already is loaded
if (document.readyState === 'complete'){
setTimeout(trigger);
} else {
this.on('DOMContentLoaded', trigger); // works for modern browsers and IE9
// we can not use jqLite since we are not done loading and jQuery could be loaded later.
JQLite(window).on('load', trigger); // fallback to window.onload for others
}
},
toString: function() {
var value = [];
forEach(this, function(e){ value.push('' + e);});
return '[' + value.join(', ') + ']';
},
eq: function(index) {
return (index >= 0) ? jqLite(this[index]) : jqLite(this[this.length + index]);
},
length: 0,
push: push,
sort: [].sort,
splice: [].splice
};
//////////////////////////////////////////
// Functions iterating getter/setters.
// these functions return self on setter and
// value on get.
//////////////////////////////////////////
var BOOLEAN_ATTR = {};
forEach('multiple,selected,checked,disabled,readOnly,required,open'.split(','), function(value) {
BOOLEAN_ATTR[lowercase(value)] = value;
});
var BOOLEAN_ELEMENTS = {};
forEach('input,select,option,textarea,button,form,details'.split(','), function(value) {
BOOLEAN_ELEMENTS[uppercase(value)] = true;
});
function getBooleanAttrName(element, name) {
// check dom last since we will most likely fail on name
var booleanAttr = BOOLEAN_ATTR[name.toLowerCase()];
// booleanAttr is here twice to minimize DOM access
return booleanAttr && BOOLEAN_ELEMENTS[element.nodeName] && booleanAttr;
}
forEach({
data: JQLiteData,
inheritedData: JQLiteInheritedData,
scope: function(element) {
return JQLiteInheritedData(element, '$scope');
},
controller: JQLiteController ,
injector: function(element) {
return JQLiteInheritedData(element, '$injector');
},
removeAttr: function(element,name) {
element.removeAttribute(name);
},
hasClass: JQLiteHasClass,
css: function(element, name, value) {
name = camelCase(name);
if (isDefined(value)) {
element.style[name] = value;
} else {
var val;
if (msie <= 8) {
// this is some IE specific weirdness that jQuery 1.6.4 does not sure why
val = element.currentStyle && element.currentStyle[name];
if (val === '') val = 'auto';
}
val = val || element.style[name];
if (msie <= 8) {
// jquery weirdness :-/
val = (val === '') ? undefined : val;
}
return val;
}
},
attr: function(element, name, value){
var lowercasedName = lowercase(name);
if (BOOLEAN_ATTR[lowercasedName]) {
if (isDefined(value)) {
if (!!value) {
element[name] = true;
element.setAttribute(name, lowercasedName);
} else {
element[name] = false;
element.removeAttribute(lowercasedName);
}
} else {
return (element[name] ||
(element.attributes.getNamedItem(name)|| noop).specified)
? lowercasedName
: undefined;
}
} else if (isDefined(value)) {
element.setAttribute(name, value);
} else if (element.getAttribute) {
// the extra argument "2" is to get the right thing for a.href in IE, see jQuery code
// some elements (e.g. Document) don't have get attribute, so return undefined
var ret = element.getAttribute(name, 2);
// normalize non-existing attributes to undefined (as jQuery)
return ret === null ? undefined : ret;
}
},
prop: function(element, name, value) {
if (isDefined(value)) {
element[name] = value;
} else {
return element[name];
}
},
text: (function() {
var NODE_TYPE_TEXT_PROPERTY = [];
if (msie < 9) {
NODE_TYPE_TEXT_PROPERTY[1] = 'innerText'; /** Element **/
NODE_TYPE_TEXT_PROPERTY[3] = 'nodeValue'; /** Text **/
} else {
NODE_TYPE_TEXT_PROPERTY[1] = /** Element **/
NODE_TYPE_TEXT_PROPERTY[3] = 'textContent'; /** Text **/
}
getText.$dv = '';
return getText;
function getText(element, value) {
var textProp = NODE_TYPE_TEXT_PROPERTY[element.nodeType]
if (isUndefined(value)) {
return textProp ? element[textProp] : '';
}
element[textProp] = value;
}
})(),
val: function(element, value) {
if (isUndefined(value)) {
if (nodeName_(element) === 'SELECT' && element.multiple) {
var result = [];
forEach(element.options, function (option) {
if (option.selected) {
result.push(option.value || option.text);
}
});
return result.length === 0 ? null : result;
}
return element.value;
}
element.value = value;
},
html: function(element, value) {
if (isUndefined(value)) {
return element.innerHTML;
}
for (var i = 0, childNodes = element.childNodes; i < childNodes.length; i++) {
JQLiteDealoc(childNodes[i]);
}
element.innerHTML = value;
}
}, function(fn, name){
/**
* Properties: writes return selection, reads return first value
*/
JQLite.prototype[name] = function(arg1, arg2) {
var i, key;
// JQLiteHasClass has only two arguments, but is a getter-only fn, so we need to special-case it
// in a way that survives minification.
if (((fn.length == 2 && (fn !== JQLiteHasClass && fn !== JQLiteController)) ? arg1 : arg2) === undefined) {
if (isObject(arg1)) {
// we are a write, but the object properties are the key/values
for(i=0; i < this.length; i++) {
if (fn === JQLiteData) {
// data() takes the whole object in jQuery
fn(this[i], arg1);
} else {
for (key in arg1) {
fn(this[i], key, arg1[key]);
}
}
}
// return self for chaining
return this;
} else {
// we are a read, so read the first child.
var value = fn.$dv;
// Only if we have $dv do we iterate over all, otherwise it is just the first element.
var jj = value == undefined ? Math.min(this.length, 1) : this.length;
for (var j = 0; j < jj; j++) {
var nodeValue = fn(this[j], arg1, arg2);
value = value ? value + nodeValue : nodeValue;
}
return value;
}
} else {
// we are a write, so apply to all children
for(i=0; i < this.length; i++) {
fn(this[i], arg1, arg2);
}
// return self for chaining
return this;
}
};
});
function createEventHandler(element, events) {
var eventHandler = function (event, type) {
if (!event.preventDefault) {
event.preventDefault = function() {
event.returnValue = false; //ie
};
}
if (!event.stopPropagation) {
event.stopPropagation = function() {
event.cancelBubble = true; //ie
};
}
if (!event.target) {
event.target = event.srcElement || document;
}
if (isUndefined(event.defaultPrevented)) {
var prevent = event.preventDefault;
event.preventDefault = function() {
event.defaultPrevented = true;
prevent.call(event);
};
event.defaultPrevented = false;
}
event.isDefaultPrevented = function() {
return event.defaultPrevented || event.returnValue == false;
};
forEach(events[type || event.type], function(fn) {
fn.call(element, event);
});
// Remove monkey-patched methods (IE),
// as they would cause memory leaks in IE8.
if (msie <= 8) {
// IE7/8 does not allow to delete property on native object
event.preventDefault = null;
event.stopPropagation = null;
event.isDefaultPrevented = null;
} else {
// It shouldn't affect normal browsers (native methods are defined on prototype).
delete event.preventDefault;
delete event.stopPropagation;
delete event.isDefaultPrevented;
}
};
eventHandler.elem = element;
return eventHandler;
}
//////////////////////////////////////////
// Functions iterating traversal.
// These functions chain results into a single
// selector.
//////////////////////////////////////////
forEach({
removeData: JQLiteRemoveData,
dealoc: JQLiteDealoc,
on: function onFn(element, type, fn, unsupported){
if (isDefined(unsupported)) throw jqLiteMinErr('onargs', 'jqLite#on() does not support the `selector` or `eventData` parameters');
var events = JQLiteExpandoStore(element, 'events'),
handle = JQLiteExpandoStore(element, 'handle');
if (!events) JQLiteExpandoStore(element, 'events', events = {});
if (!handle) JQLiteExpandoStore(element, 'handle', handle = createEventHandler(element, events));
forEach(type.split(' '), function(type){
var eventFns = events[type];
if (!eventFns) {
if (type == 'mouseenter' || type == 'mouseleave') {
var contains = document.body.contains || document.body.compareDocumentPosition ?
function( a, b ) {
var adown = a.nodeType === 9 ? a.documentElement : a,
bup = b && b.parentNode;
return a === bup || !!( bup && bup.nodeType === 1 && (
adown.contains ?
adown.contains( bup ) :
a.compareDocumentPosition && a.compareDocumentPosition( bup ) & 16
));
} :
function( a, b ) {
if ( b ) {
while ( (b = b.parentNode) ) {
if ( b === a ) {
return true;
}
}
}
return false;
};
events[type] = [];
// Refer to jQuery's implementation of mouseenter & mouseleave
// Read about mouseenter and mouseleave:
// http://www.quirksmode.org/js/events_mouse.html#link8
var eventmap = { mouseleave : "mouseout", mouseenter : "mouseover"};
onFn(element, eventmap[type], function(event) {
var target = this, related = event.relatedTarget;
// For mousenter/leave call the handler if related is outside the target.
// NB: No relatedTarget if the mouse left/entered the browser window
if ( !related || (related !== target && !contains(target, related)) ){
handle(event, type);
}
});
} else {
addEventListenerFn(element, type, handle);
events[type] = [];
}
eventFns = events[type]
}
eventFns.push(fn);
});
},
off: JQLiteOff,
replaceWith: function(element, replaceNode) {
var index, parent = element.parentNode;
JQLiteDealoc(element);
forEach(new JQLite(replaceNode), function(node){
if (index) {
parent.insertBefore(node, index.nextSibling);
} else {
parent.replaceChild(node, element);
}
index = node;
});
},
children: function(element) {
var children = [];
forEach(element.childNodes, function(element){
if (element.nodeType === 1)
children.push(element);
});
return children;
},
contents: function(element) {
return element.childNodes || [];
},
append: function(element, node) {
forEach(new JQLite(node), function(child){
if (element.nodeType === 1 || element.nodeType === 11) {
element.appendChild(child);
}
});
},
prepend: function(element, node) {
if (element.nodeType === 1) {
var index = element.firstChild;
forEach(new JQLite(node), function(child){
element.insertBefore(child, index);
});
}
},
wrap: function(element, wrapNode) {
wrapNode = jqLite(wrapNode)[0];
var parent = element.parentNode;
if (parent) {
parent.replaceChild(wrapNode, element);
}
wrapNode.appendChild(element);
},
remove: function(element) {
JQLiteDealoc(element);
var parent = element.parentNode;
if (parent) parent.removeChild(element);
},
after: function(element, newElement) {
var index = element, parent = element.parentNode;
forEach(new JQLite(newElement), function(node){
parent.insertBefore(node, index.nextSibling);
index = node;
});
},
addClass: JQLiteAddClass,
removeClass: JQLiteRemoveClass,
toggleClass: function(element, selector, condition) {
if (isUndefined(condition)) {
condition = !JQLiteHasClass(element, selector);
}
(condition ? JQLiteAddClass : JQLiteRemoveClass)(element, selector);
},
parent: function(element) {
var parent = element.parentNode;
return parent && parent.nodeType !== 11 ? parent : null;
},
next: function(element) {
if (element.nextElementSibling) {
return element.nextElementSibling;
}
// IE8 doesn't have nextElementSibling
var elm = element.nextSibling;
while (elm != null && elm.nodeType !== 1) {
elm = elm.nextSibling;
}
return elm;
},
find: function(element, selector) {
return element.getElementsByTagName(selector);
},
clone: JQLiteClone,
triggerHandler: function(element, eventName, eventData) {
var eventFns = (JQLiteExpandoStore(element, 'events') || {})[eventName];
eventData = eventData || {
preventDefault: noop,
stopPropagation: noop
};
forEach(eventFns, function(fn) {
fn.call(element, eventData);
});
}
}, function(fn, name){
/**
* chaining functions
*/
JQLite.prototype[name] = function(arg1, arg2, arg3) {
var value;
for(var i=0; i < this.length; i++) {
if (value == undefined) {
value = fn(this[i], arg1, arg2, arg3);
if (value !== undefined) {
// any function which returns a value needs to be wrapped
value = jqLite(value);
}
} else {
JQLiteAddNodes(value, fn(this[i], arg1, arg2, arg3));
}
}
return value == undefined ? this : value;
};
// bind legacy bind/unbind to on/off
JQLite.prototype.bind = JQLite.prototype.on;
JQLite.prototype.unbind = JQLite.prototype.off;
});
/**
* Computes a hash of an 'obj'.
* Hash of a:
* string is string
* number is number as string
* object is either result of calling $$hashKey function on the object or uniquely generated id,
* that is also assigned to the $$hashKey property of the object.
*
* @param obj
* @returns {string} hash string such that the same input will have the same hash string.
* The resulting string key is in 'type:hashKey' format.
*/
function hashKey(obj) {
var objType = typeof obj,
key;
if (objType == 'object' && obj !== null) {
if (typeof (key = obj.$$hashKey) == 'function') {
// must invoke on object to keep the right this
key = obj.$$hashKey();
} else if (key === undefined) {
key = obj.$$hashKey = nextUid();
}
} else {
key = obj;
}
return objType + ':' + key;
}
/**
* HashMap which can use objects as keys
*/
function HashMap(array){
forEach(array, this.put, this);
}
HashMap.prototype = {
/**
* Store key value pair
* @param key key to store can be any type
* @param value value to store can be any type
*/
put: function(key, value) {
this[hashKey(key)] = value;
},
/**
* @param key
* @returns the value for the key
*/
get: function(key) {
return this[hashKey(key)];
},
/**
* Remove the key/value pair
* @param key
*/
remove: function(key) {
var value = this[key = hashKey(key)];
delete this[key];
return value;
}
};
/**
* @ngdoc function
* @name angular.injector
* @function
*
* @description
* Creates an injector function that can be used for retrieving services as well as for
* dependency injection (see {@link guide/di dependency injection}).
*
* @param {Array.<string|Function>} modules A list of module functions or their aliases. See
* {@link angular.module}. The `ng` module must be explicitly added.
* @returns {function()} Injector function. See {@link AUTO.$injector $injector}.
*
* @example
* Typical usage
* <pre>
* // create an injector
* var $injector = angular.injector(['ng']);
*
* // use the injector to kick off your application
* // use the type inference to auto inject arguments, or use implicit injection
* $injector.invoke(function($rootScope, $compile, $document){
* $compile($document)($rootScope);
* $rootScope.$digest();
* });
* </pre>
*/
/**
* @ngdoc overview
* @name AUTO
* @description
*
* Implicit module which gets automatically added to each {@link AUTO.$injector $injector}.
*/
var FN_ARGS = /^function\s*[^\(]*\(\s*([^\)]*)\)/m;
var FN_ARG_SPLIT = /,/;
var FN_ARG = /^\s*(_?)(\S+?)\1\s*$/;
var STRIP_COMMENTS = /((\/\/.*$)|(\/\*[\s\S]*?\*\/))/mg;
var $injectorMinErr = minErr('$injector');
function annotate(fn) {
var $inject,
fnText,
argDecl,
last;
if (typeof fn == 'function') {
if (!($inject = fn.$inject)) {
$inject = [];
fnText = fn.toString().replace(STRIP_COMMENTS, '');
argDecl = fnText.match(FN_ARGS);
forEach(argDecl[1].split(FN_ARG_SPLIT), function(arg){
arg.replace(FN_ARG, function(all, underscore, name){
$inject.push(name);
});
});
fn.$inject = $inject;
}
} else if (isArray(fn)) {
last = fn.length - 1;
assertArgFn(fn[last], 'fn');
$inject = fn.slice(0, last);
} else {
assertArgFn(fn, 'fn', true);
}
return $inject;
}
///////////////////////////////////////
/**
* @ngdoc object
* @name AUTO.$injector
* @function
*
* @description
*
* `$injector` is used to retrieve object instances as defined by
* {@link AUTO.$provide provider}, instantiate types, invoke methods,
* and load modules.
*
* The following always holds true:
*
* <pre>
* var $injector = angular.injector();
* expect($injector.get('$injector')).toBe($injector);
* expect($injector.invoke(function($injector){
* return $injector;
* }).toBe($injector);
* </pre>
*
* # Injection Function Annotation
*
* JavaScript does not have annotations, and annotations are needed for dependency injection. The
* following are all valid ways of annotating function with injection arguments and are equivalent.
*
* <pre>
* // inferred (only works if code not minified/obfuscated)
* $injector.invoke(function(serviceA){});
*
* // annotated
* function explicit(serviceA) {};
* explicit.$inject = ['serviceA'];
* $injector.invoke(explicit);
*
* // inline
* $injector.invoke(['serviceA', function(serviceA){}]);
* </pre>
*
* ## Inference
*
* In JavaScript calling `toString()` on a function returns the function definition. The definition can then be
* parsed and the function arguments can be extracted. *NOTE:* This does not work with minification, and obfuscation
* tools since these tools change the argument names.
*
* ## `$inject` Annotation
* By adding a `$inject` property onto a function the injection parameters can be specified.
*
* ## Inline
* As an array of injection names, where the last item in the array is the function to call.
*/
/**
* @ngdoc method
* @name AUTO.$injector#get
* @methodOf AUTO.$injector
*
* @description
* Return an instance of the service.
*
* @param {string} name The name of the instance to retrieve.
* @return {*} The instance.
*/
/**
* @ngdoc method
* @name AUTO.$injector#invoke
* @methodOf AUTO.$injector
*
* @description
* Invoke the method and supply the method arguments from the `$injector`.
*
* @param {!function} fn The function to invoke. The function arguments come form the function annotation.
* @param {Object=} self The `this` for the invoked method.
* @param {Object=} locals Optional object. If preset then any argument names are read from this object first, before
* the `$injector` is consulted.
* @returns {*} the value returned by the invoked `fn` function.
*/
/**
* @ngdoc method
* @name AUTO.$injector#has
* @methodOf AUTO.$injector
*
* @description
* Allows the user to query if the particular service exist.
*
* @param {string} Name of the service to query.
* @returns {boolean} returns true if injector has given service.
*/
/**
* @ngdoc method
* @name AUTO.$injector#instantiate
* @methodOf AUTO.$injector
* @description
* Create a new instance of JS type. The method takes a constructor function invokes the new operator and supplies
* all of the arguments to the constructor function as specified by the constructor annotation.
*
* @param {function} Type Annotated constructor function.
* @param {Object=} locals Optional object. If preset then any argument names are read from this object first, before
* the `$injector` is consulted.
* @returns {Object} new instance of `Type`.
*/
/**
* @ngdoc method
* @name AUTO.$injector#annotate
* @methodOf AUTO.$injector
*
* @description
* Returns an array of service names which the function is requesting for injection. This API is used by the injector
* to determine which services need to be injected into the function when the function is invoked. There are three
* ways in which the function can be annotated with the needed dependencies.
*
* # Argument names
*
* The simplest form is to extract the dependencies from the arguments of the function. This is done by converting
* the function into a string using `toString()` method and extracting the argument names.
* <pre>
* // Given
* function MyController($scope, $route) {
* // ...
* }
*
* // Then
* expect(injector.annotate(MyController)).toEqual(['$scope', '$route']);
* </pre>
*
* This method does not work with code minification / obfuscation. For this reason the following annotation strategies
* are supported.
*
* # The `$inject` property
*
* If a function has an `$inject` property and its value is an array of strings, then the strings represent names of
* services to be injected into the function.
* <pre>
* // Given
* var MyController = function(obfuscatedScope, obfuscatedRoute) {
* // ...
* }
* // Define function dependencies
* MyController.$inject = ['$scope', '$route'];
*
* // Then
* expect(injector.annotate(MyController)).toEqual(['$scope', '$route']);
* </pre>
*
* # The array notation
*
* It is often desirable to inline Injected functions and that's when setting the `$inject` property is very
* inconvenient. In these situations using the array notation to specify the dependencies in a way that survives
* minification is a better choice:
*
* <pre>
* // We wish to write this (not minification / obfuscation safe)
* injector.invoke(function($compile, $rootScope) {
* // ...
* });
*
* // We are forced to write break inlining
* var tmpFn = function(obfuscatedCompile, obfuscatedRootScope) {
* // ...
* };
* tmpFn.$inject = ['$compile', '$rootScope'];
* injector.invoke(tmpFn);
*
* // To better support inline function the inline annotation is supported
* injector.invoke(['$compile', '$rootScope', function(obfCompile, obfRootScope) {
* // ...
* }]);
*
* // Therefore
* expect(injector.annotate(
* ['$compile', '$rootScope', function(obfus_$compile, obfus_$rootScope) {}])
* ).toEqual(['$compile', '$rootScope']);
* </pre>
*
* @param {function|Array.<string|Function>} fn Function for which dependent service names need to be retrieved as described
* above.
*
* @returns {Array.<string>} The names of the services which the function requires.
*/
/**
* @ngdoc object
* @name AUTO.$provide
*
* @description
*
* Use `$provide` to register new providers with the `$injector`. The providers are the factories for the instance.
* The providers share the same name as the instance they create with `Provider` suffixed to them.
*
* A provider is an object with a `$get()` method. The injector calls the `$get` method to create a new instance of
* a service. The Provider can have additional methods which would allow for configuration of the provider.
*
* <pre>
* function GreetProvider() {
* var salutation = 'Hello';
*
* this.salutation = function(text) {
* salutation = text;
* };
*
* this.$get = function() {
* return function (name) {
* return salutation + ' ' + name + '!';
* };
* };
* }
*
* describe('Greeter', function(){
*
* beforeEach(module(function($provide) {
* $provide.provider('greet', GreetProvider);
* }));
*
* it('should greet', inject(function(greet) {
* expect(greet('angular')).toEqual('Hello angular!');
* }));
*
* it('should allow configuration of salutation', function() {
* module(function(greetProvider) {
* greetProvider.salutation('Ahoj');
* });
* inject(function(greet) {
* expect(greet('angular')).toEqual('Ahoj angular!');
* });
* });
* </pre>
*/
/**
* @ngdoc method
* @name AUTO.$provide#provider
* @methodOf AUTO.$provide
* @description
*
* Register a provider for a service. The providers can be retrieved and can have additional configuration methods.
*
* @param {string} name The name of the instance. NOTE: the provider will be available under `name + 'Provider'` key.
* @param {(Object|function())} provider If the provider is:
*
* - `Object`: then it should have a `$get` method. The `$get` method will be invoked using
* {@link AUTO.$injector#invoke $injector.invoke()} when an instance needs to be created.
* - `Constructor`: a new instance of the provider will be created using
* {@link AUTO.$injector#instantiate $injector.instantiate()}, then treated as `object`.
*
* @returns {Object} registered provider instance
*/
/**
* @ngdoc method
* @name AUTO.$provide#factory
* @methodOf AUTO.$provide
* @description
*
* A short hand for configuring services if only `$get` method is required.
*
* @param {string} name The name of the instance.
* @param {function()} $getFn The $getFn for the instance creation. Internally this is a short hand for
* `$provide.provider(name, {$get: $getFn})`.
* @returns {Object} registered provider instance
*/
/**
* @ngdoc method
* @name AUTO.$provide#service
* @methodOf AUTO.$provide
* @description
*
* A short hand for registering service of given class.
*
* @param {string} name The name of the instance.
* @param {Function} constructor A class (constructor function) that will be instantiated.
* @returns {Object} registered provider instance
*/
/**
* @ngdoc method
* @name AUTO.$provide#value
* @methodOf AUTO.$provide
* @description
*
* A short hand for configuring services if the `$get` method is a constant.
*
* @param {string} name The name of the instance.
* @param {*} value The value.
* @returns {Object} registered provider instance
*/
/**
* @ngdoc method
* @name AUTO.$provide#constant
* @methodOf AUTO.$provide
* @description
*
* A constant value, but unlike {@link AUTO.$provide#value value} it can be injected
* into configuration function (other modules) and it is not interceptable by
* {@link AUTO.$provide#decorator decorator}.
*
* @param {string} name The name of the constant.
* @param {*} value The constant value.
* @returns {Object} registered instance
*/
/**
* @ngdoc method
* @name AUTO.$provide#decorator
* @methodOf AUTO.$provide
* @description
*
* Decoration of service, allows the decorator to intercept the service instance creation. The
* returned instance may be the original instance, or a new instance which delegates to the
* original instance.
*
* @param {string} name The name of the service to decorate.
* @param {function()} decorator This function will be invoked when the service needs to be
* instantiated. The function is called using the {@link AUTO.$injector#invoke
* injector.invoke} method and is therefore fully injectable. Local injection arguments:
*
* * `$delegate` - The original service instance, which can be monkey patched, configured,
* decorated or delegated to.
*/
function createInjector(modulesToLoad) {
var INSTANTIATING = {},
providerSuffix = 'Provider',
path = [],
loadedModules = new HashMap(),
providerCache = {
$provide: {
provider: supportObject(provider),
factory: supportObject(factory),
service: supportObject(service),
value: supportObject(value),
constant: supportObject(constant),
decorator: decorator
}
},
providerInjector = (providerCache.$injector =
createInternalInjector(providerCache, function() {
throw $injectorMinErr('unpr', "Unknown provider: {0}", path.join(' <- '));
})),
instanceCache = {},
instanceInjector = (instanceCache.$injector =
createInternalInjector(instanceCache, function(servicename) {
var provider = providerInjector.get(servicename + providerSuffix);
return instanceInjector.invoke(provider.$get, provider);
}));
forEach(loadModules(modulesToLoad), function(fn) { instanceInjector.invoke(fn || noop); });
return instanceInjector;
////////////////////////////////////
// $provider
////////////////////////////////////
function supportObject(delegate) {
return function(key, value) {
if (isObject(key)) {
forEach(key, reverseParams(delegate));
} else {
return delegate(key, value);
}
}
}
function provider(name, provider_) {
if (isFunction(provider_) || isArray(provider_)) {
provider_ = providerInjector.instantiate(provider_);
}
if (!provider_.$get) {
throw $injectorMinErr('pget', "Provider '{0}' must define $get factory method.", name);
}
return providerCache[name + providerSuffix] = provider_;
}
function factory(name, factoryFn) { return provider(name, { $get: factoryFn }); }
function service(name, constructor) {
return factory(name, ['$injector', function($injector) {
return $injector.instantiate(constructor);
}]);
}
function value(name, value) { return factory(name, valueFn(value)); }
function constant(name, value) {
providerCache[name] = value;
instanceCache[name] = value;
}
function decorator(serviceName, decorFn) {
var origProvider = providerInjector.get(serviceName + providerSuffix),
orig$get = origProvider.$get;
origProvider.$get = function() {
var origInstance = instanceInjector.invoke(orig$get, origProvider);
return instanceInjector.invoke(decorFn, null, {$delegate: origInstance});
};
}
////////////////////////////////////
// Module Loading
////////////////////////////////////
function loadModules(modulesToLoad){
var runBlocks = [];
forEach(modulesToLoad, function(module) {
if (loadedModules.get(module)) return;
loadedModules.put(module, true);
try {
if (isString(module)) {
var moduleFn = angularModule(module);
runBlocks = runBlocks.concat(loadModules(moduleFn.requires)).concat(moduleFn._runBlocks);
for(var invokeQueue = moduleFn._invokeQueue, i = 0, ii = invokeQueue.length; i < ii; i++) {
var invokeArgs = invokeQueue[i],
provider = providerInjector.get(invokeArgs[0]);
provider[invokeArgs[1]].apply(provider, invokeArgs[2]);
}
} else if (isFunction(module)) {
runBlocks.push(providerInjector.invoke(module));
} else if (isArray(module)) {
runBlocks.push(providerInjector.invoke(module));
} else {
assertArgFn(module, 'module');
}
} catch (e) {
if (isArray(module)) {
module = module[module.length - 1];
}
if (e.message && e.stack && e.stack.indexOf(e.message) == -1) {
// Safari & FF's stack traces don't contain error.message content unlike those of Chrome and IE
// So if stack doesn't contain message, we create a new string that contains both.
// Since error.stack is read-only in Safari, I'm overriding e and not e.stack here.
e = e.message + '\n' + e.stack;
}
throw $injectorMinErr('modulerr', "Failed to instantiate module {0} due to:\n{1}", module, e.stack || e.message || e);
}
});
return runBlocks;
}
////////////////////////////////////
// internal Injector
////////////////////////////////////
function createInternalInjector(cache, factory) {
function getService(serviceName) {
if (cache.hasOwnProperty(serviceName)) {
if (cache[serviceName] === INSTANTIATING) {
throw $injectorMinErr('cdep', 'Circular dependency found: {0}', path.join(' <- '));
}
return cache[serviceName];
} else {
try {
path.unshift(serviceName);
cache[serviceName] = INSTANTIATING;
return cache[serviceName] = factory(serviceName);
} finally {
path.shift();
}
}
}
function invoke(fn, self, locals){
var args = [],
$inject = annotate(fn),
length, i,
key;
for(i = 0, length = $inject.length; i < length; i++) {
key = $inject[i];
if (typeof key !== 'string') {
throw $injectorMinErr('itkn', 'Incorrect injection token! Expected service name as string, got {0}', key);
}
args.push(
locals && locals.hasOwnProperty(key)
? locals[key]
: getService(key)
);
}
if (!fn.$inject) {
// this means that we must be an array.
fn = fn[length];
}
// Performance optimization: http://jsperf.com/apply-vs-call-vs-invoke
switch (self ? -1 : args.length) {
case 0: return fn();
case 1: return fn(args[0]);
case 2: return fn(args[0], args[1]);
case 3: return fn(args[0], args[1], args[2]);
case 4: return fn(args[0], args[1], args[2], args[3]);
case 5: return fn(args[0], args[1], args[2], args[3], args[4]);
case 6: return fn(args[0], args[1], args[2], args[3], args[4], args[5]);
case 7: return fn(args[0], args[1], args[2], args[3], args[4], args[5], args[6]);
case 8: return fn(args[0], args[1], args[2], args[3], args[4], args[5], args[6], args[7]);
case 9: return fn(args[0], args[1], args[2], args[3], args[4], args[5], args[6], args[7], args[8]);
case 10: return fn(args[0], args[1], args[2], args[3], args[4], args[5], args[6], args[7], args[8], args[9]);
default: return fn.apply(self, args);
}
}
function instantiate(Type, locals) {
var Constructor = function() {},
instance, returnedValue;
// Check if Type is annotated and use just the given function at n-1 as parameter
// e.g. someModule.factory('greeter', ['$window', function(renamed$window) {}]);
Constructor.prototype = (isArray(Type) ? Type[Type.length - 1] : Type).prototype;
instance = new Constructor();
returnedValue = invoke(Type, instance, locals);
return isObject(returnedValue) ? returnedValue : instance;
}
return {
invoke: invoke,
instantiate: instantiate,
get: getService,
annotate: annotate,
has: function(name) {
return providerCache.hasOwnProperty(name + providerSuffix) || cache.hasOwnProperty(name);
}
};
}
}
/**
* @ngdoc function
* @name ng.$anchorScroll
* @requires $window
* @requires $location
* @requires $rootScope
*
* @description
* When called, it checks current value of `$location.hash()` and scroll to related element,
* according to rules specified in
* {@link http://dev.w3.org/html5/spec/Overview.html#the-indicated-part-of-the-document Html5 spec}.
*
* It also watches the `$location.hash()` and scroll whenever it changes to match any anchor.
* This can be disabled by calling `$anchorScrollProvider.disableAutoScrolling()`.
*/
function $AnchorScrollProvider() {
var autoScrollingEnabled = true;
this.disableAutoScrolling = function() {
autoScrollingEnabled = false;
};
this.$get = ['$window', '$location', '$rootScope', function($window, $location, $rootScope) {
var document = $window.document;
// helper function to get first anchor from a NodeList
// can't use filter.filter, as it accepts only instances of Array
// and IE can't convert NodeList to an array using [].slice
// TODO(vojta): use filter if we change it to accept lists as well
function getFirstAnchor(list) {
var result = null;
forEach(list, function(element) {
if (!result && lowercase(element.nodeName) === 'a') result = element;
});
return result;
}
function scroll() {
var hash = $location.hash(), elm;
// empty hash, scroll to the top of the page
if (!hash) $window.scrollTo(0, 0);
// element with given id
else if ((elm = document.getElementById(hash))) elm.scrollIntoView();
// first anchor with given name :-D
else if ((elm = getFirstAnchor(document.getElementsByName(hash)))) elm.scrollIntoView();
// no element and hash == 'top', scroll to the top of the page
else if (hash === 'top') $window.scrollTo(0, 0);
}
// does not scroll when user clicks on anchor link that is currently on
// (no url change, no $location.hash() change), browser native does scroll
if (autoScrollingEnabled) {
$rootScope.$watch(function autoScrollWatch() {return $location.hash();},
function autoScrollWatchAction() {
$rootScope.$evalAsync(scroll);
});
}
return scroll;
}];
}
var $animateMinErr = minErr('$animate');
/**
* @ngdoc object
* @name ng.$animateProvider
*
* @description
* Default implementation of $animate that doesn't perform any animations, instead just synchronously performs DOM
* updates and calls done() callbacks.
*
* In order to enable animations the ngAnimate module has to be loaded.
*
* To see the functional implementation check out src/ngAnimate/animate.js
*/
var $AnimateProvider = ['$provide', function($provide) {
this.$$selectors = {};
/**
* @ngdoc function
* @name ng.$animateProvider#register
* @methodOf ng.$animateProvider
*
* @description
* Registers a new injectable animation factory function. The factory function produces the animation object which
* contains callback functions for each event that is expected to be animated.
*
* * `eventFn`: `function(Element, doneFunction)` The element to animate, the `doneFunction` must be called once the
* element animation is complete. If a function is returned then the animation service will use this function to
* cancel the animation whenever a cancel event is triggered.
*
*
*<pre>
* return {
* eventFn : function(element, done) {
* //code to run the animation
* //once complete, then run done()
* return function cancellationFunction() {
* //code to cancel the animation
* }
* }
* }
*</pre>
*
* @param {string} name The name of the animation.
* @param {function} factory The factory function that will be executed to return the animation object.
*/
this.register = function(name, factory) {
var key = name + '-animation';
if (name && name.charAt(0) != '.') throw $animateMinErr('notcsel',
"Expecting class selector starting with '.' got '{0}'.", name);
this.$$selectors[name.substr(1)] = key;
$provide.factory(key, factory);
};
this.$get = ['$timeout', function($timeout) {
/**
* @ngdoc object
* @name ng.$animate
*
* @description
* The $animate service provides rudimentary DOM manipulation functions to insert, remove, move elements within
* the DOM as well as adding and removing classes. This service is the core service used by the ngAnimate $animator
* service which provides high-level animation hooks for CSS and JavaScript.
*
* $animate is available in the AngularJS core, however, the ngAnimate module must be included to enable full out
* animation support. Otherwise, $animate will only perform simple DOM manipulation operations.
*
* To learn more about enabling animation support, click here to visit the {@link ngAnimate ngAnimate module page}
* as well as the {@link ngAnimate.$animate ngAnimate $animate service page}.
*/
return {
/**
* @ngdoc function
* @name ng.$animate#enter
* @methodOf ng.$animate
* @function
*
* @description
* Inserts the element into the DOM either after the `after` element or within the `parent` element. Once complete,
* the done() callback will be fired (if provided).
*
* @param {jQuery/jqLite element} element the element which will be inserted into the DOM
* @param {jQuery/jqLite element} parent the parent element which will append the element as a child (if the after element is not present)
* @param {jQuery/jqLite element} after the sibling element which will append the element after itself
* @param {function=} done callback function that will be called after the element has been inserted into the DOM
*/
enter : function(element, parent, after, done) {
var afterNode = after && after[after.length - 1];
var parentNode = parent && parent[0] || afterNode && afterNode.parentNode;
// IE does not like undefined so we have to pass null.
var afterNextSibling = (afterNode && afterNode.nextSibling) || null;
forEach(element, function(node) {
parentNode.insertBefore(node, afterNextSibling);
});
$timeout(done || noop, 0, false);
},
/**
* @ngdoc function
* @name ng.$animate#leave
* @methodOf ng.$animate
* @function
*
* @description
* Removes the element from the DOM. Once complete, the done() callback will be fired (if provided).
*
* @param {jQuery/jqLite element} element the element which will be removed from the DOM
* @param {function=} done callback function that will be called after the element has been removed from the DOM
*/
leave : function(element, done) {
element.remove();
$timeout(done || noop, 0, false);
},
/**
* @ngdoc function
* @name ng.$animate#move
* @methodOf ng.$animate
* @function
*
* @description
* Moves the position of the provided element within the DOM to be placed either after the `after` element or inside of the `parent` element.
* Once complete, the done() callback will be fired (if provided).
*
* @param {jQuery/jqLite element} element the element which will be moved around within the DOM
* @param {jQuery/jqLite element} parent the parent element where the element will be inserted into (if the after element is not present)
* @param {jQuery/jqLite element} after the sibling element where the element will be positioned next to
* @param {function=} done the callback function (if provided) that will be fired after the element has been moved to it's new position
*/
move : function(element, parent, after, done) {
// Do not remove element before insert. Removing will cause data associated with the
// element to be dropped. Insert will implicitly do the remove.
this.enter(element, parent, after, done);
},
/**
* @ngdoc function
* @name ng.$animate#addClass
* @methodOf ng.$animate
* @function
*
* @description
* Adds the provided className CSS class value to the provided element. Once complete, the done() callback will be fired (if provided).
*
* @param {jQuery/jqLite element} element the element which will have the className value added to it
* @param {string} className the CSS class which will be added to the element
* @param {function=} done the callback function (if provided) that will be fired after the className value has been added to the element
*/
addClass : function(element, className, done) {
className = isString(className) ?
className :
isArray(className) ? className.join(' ') : '';
element.addClass(className);
$timeout(done || noop, 0, false);
},
/**
* @ngdoc function
* @name ng.$animate#removeClass
* @methodOf ng.$animate
* @function
*
* @description
* Removes the provided className CSS class value from the provided element. Once complete, the done() callback will be fired (if provided).
*
* @param {jQuery/jqLite element} element the element which will have the className value removed from it
* @param {string} className the CSS class which will be removed from the element
* @param {function=} done the callback function (if provided) that will be fired after the className value has been removed from the element
*/
removeClass : function(element, className, done) {
className = isString(className) ?
className :
isArray(className) ? className.join(' ') : '';
element.removeClass(className);
$timeout(done || noop, 0, false);
},
enabled : noop
};
}];
}];
/**
* ! This is a private undocumented service !
*
* @name ng.$browser
* @requires $log
* @description
* This object has two goals:
*
* - hide all the global state in the browser caused by the window object
* - abstract away all the browser specific features and inconsistencies
*
* For tests we provide {@link ngMock.$browser mock implementation} of the `$browser`
* service, which can be used for convenient testing of the application without the interaction with
* the real browser apis.
*/
/**
* @param {object} window The global window object.
* @param {object} document jQuery wrapped document.
* @param {function()} XHR XMLHttpRequest constructor.
* @param {object} $log console.log or an object with the same interface.
* @param {object} $sniffer $sniffer service
*/
function Browser(window, document, $log, $sniffer) {
var self = this,
rawDocument = document[0],
location = window.location,
history = window.history,
setTimeout = window.setTimeout,
clearTimeout = window.clearTimeout,
pendingDeferIds = {};
self.isMock = false;
var outstandingRequestCount = 0;
var outstandingRequestCallbacks = [];
// TODO(vojta): remove this temporary api
self.$$completeOutstandingRequest = completeOutstandingRequest;
self.$$incOutstandingRequestCount = function() { outstandingRequestCount++; };
/**
* Executes the `fn` function(supports currying) and decrements the `outstandingRequestCallbacks`
* counter. If the counter reaches 0, all the `outstandingRequestCallbacks` are executed.
*/
function completeOutstandingRequest(fn) {
try {
fn.apply(null, sliceArgs(arguments, 1));
} finally {
outstandingRequestCount--;
if (outstandingRequestCount === 0) {
while(outstandingRequestCallbacks.length) {
try {
outstandingRequestCallbacks.pop()();
} catch (e) {
$log.error(e);
}
}
}
}
}
/**
* @private
* Note: this method is used only by scenario runner
* TODO(vojta): prefix this method with $$ ?
* @param {function()} callback Function that will be called when no outstanding request
*/
self.notifyWhenNoOutstandingRequests = function(callback) {
// force browser to execute all pollFns - this is needed so that cookies and other pollers fire
// at some deterministic time in respect to the test runner's actions. Leaving things up to the
// regular poller would result in flaky tests.
forEach(pollFns, function(pollFn){ pollFn(); });
if (outstandingRequestCount === 0) {
callback();
} else {
outstandingRequestCallbacks.push(callback);
}
};
//////////////////////////////////////////////////////////////
// Poll Watcher API
//////////////////////////////////////////////////////////////
var pollFns = [],
pollTimeout;
/**
* @name ng.$browser#addPollFn
* @methodOf ng.$browser
*
* @param {function()} fn Poll function to add
*
* @description
* Adds a function to the list of functions that poller periodically executes,
* and starts polling if not started yet.
*
* @returns {function()} the added function
*/
self.addPollFn = function(fn) {
if (isUndefined(pollTimeout)) startPoller(100, setTimeout);
pollFns.push(fn);
return fn;
};
/**
* @param {number} interval How often should browser call poll functions (ms)
* @param {function()} setTimeout Reference to a real or fake `setTimeout` function.
*
* @description
* Configures the poller to run in the specified intervals, using the specified
* setTimeout fn and kicks it off.
*/
function startPoller(interval, setTimeout) {
(function check() {
forEach(pollFns, function(pollFn){ pollFn(); });
pollTimeout = setTimeout(check, interval);
})();
}
//////////////////////////////////////////////////////////////
// URL API
//////////////////////////////////////////////////////////////
var lastBrowserUrl = location.href,
baseElement = document.find('base'),
replacedUrl = null;
/**
* @name ng.$browser#url
* @methodOf ng.$browser
*
* @description
* GETTER:
* Without any argument, this method just returns current value of location.href.
*
* SETTER:
* With at least one argument, this method sets url to new value.
* If html5 history api supported, pushState/replaceState is used, otherwise
* location.href/location.replace is used.
* Returns its own instance to allow chaining
*
* NOTE: this api is intended for use only by the $location service. Please use the
* {@link ng.$location $location service} to change url.
*
* @param {string} url New url (when used as setter)
* @param {boolean=} replace Should new url replace current history record ?
*/
self.url = function(url, replace) {
// setter
if (url) {
if (lastBrowserUrl == url) return;
lastBrowserUrl = url;
if ($sniffer.history) {
if (replace) history.replaceState(null, '', url);
else {
history.pushState(null, '', url);
// Crazy Opera Bug: http://my.opera.com/community/forums/topic.dml?id=1185462
baseElement.attr('href', baseElement.attr('href'));
}
} else {
if (replace) {
location.replace(url);
replacedUrl = url;
} else {
location.href = url;
replacedUrl = null;
}
}
return self;
// getter
} else {
// - the replacedUrl is a workaround for an IE8-9 issue with location.replace method that doesn't update
// location.href synchronously
// - the replacement is a workaround for https://bugzilla.mozilla.org/show_bug.cgi?id=407172
return replacedUrl || location.href.replace(/%27/g,"'");
}
};
var urlChangeListeners = [],
urlChangeInit = false;
function fireUrlChange() {
if (lastBrowserUrl == self.url()) return;
lastBrowserUrl = self.url();
forEach(urlChangeListeners, function(listener) {
listener(self.url());
});
}
/**
* @name ng.$browser#onUrlChange
* @methodOf ng.$browser
* @TODO(vojta): refactor to use node's syntax for events
*
* @description
* Register callback function that will be called, when url changes.
*
* It's only called when the url is changed by outside of angular:
* - user types different url into address bar
* - user clicks on history (forward/back) button
* - user clicks on a link
*
* It's not called when url is changed by $browser.url() method
*
* The listener gets called with new url as parameter.
*
* NOTE: this api is intended for use only by the $location service. Please use the
* {@link ng.$location $location service} to monitor url changes in angular apps.
*
* @param {function(string)} listener Listener function to be called when url changes.
* @return {function(string)} Returns the registered listener fn - handy if the fn is anonymous.
*/
self.onUrlChange = function(callback) {
if (!urlChangeInit) {
// We listen on both (hashchange/popstate) when available, as some browsers (e.g. Opera)
// don't fire popstate when user change the address bar and don't fire hashchange when url
// changed by push/replaceState
// html5 history api - popstate event
if ($sniffer.history) jqLite(window).on('popstate', fireUrlChange);
// hashchange event
if ($sniffer.hashchange) jqLite(window).on('hashchange', fireUrlChange);
// polling
else self.addPollFn(fireUrlChange);
urlChangeInit = true;
}
urlChangeListeners.push(callback);
return callback;
};
//////////////////////////////////////////////////////////////
// Misc API
//////////////////////////////////////////////////////////////
/**
* Returns current <base href>
* (always relative - without domain)
*
* @returns {string=}
*/
self.baseHref = function() {
var href = baseElement.attr('href');
return href ? href.replace(/^https?\:\/\/[^\/]*/, '') : '';
};
//////////////////////////////////////////////////////////////
// Cookies API
//////////////////////////////////////////////////////////////
var lastCookies = {};
var lastCookieString = '';
var cookiePath = self.baseHref();
/**
* @name ng.$browser#cookies
* @methodOf ng.$browser
*
* @param {string=} name Cookie name
* @param {string=} value Cookie value
*
* @description
* The cookies method provides a 'private' low level access to browser cookies.
* It is not meant to be used directly, use the $cookie service instead.
*
* The return values vary depending on the arguments that the method was called with as follows:
* <ul>
* <li>cookies() -> hash of all cookies, this is NOT a copy of the internal state, so do not modify it</li>
* <li>cookies(name, value) -> set name to value, if value is undefined delete the cookie</li>
* <li>cookies(name) -> the same as (name, undefined) == DELETES (no one calls it right now that way)</li>
* </ul>
*
* @returns {Object} Hash of all cookies (if called without any parameter)
*/
self.cookies = function(name, value) {
var cookieLength, cookieArray, cookie, i, index;
if (name) {
if (value === undefined) {
rawDocument.cookie = escape(name) + "=;path=" + cookiePath + ";expires=Thu, 01 Jan 1970 00:00:00 GMT";
} else {
if (isString(value)) {
cookieLength = (rawDocument.cookie = escape(name) + '=' + escape(value) + ';path=' + cookiePath).length + 1;
// per http://www.ietf.org/rfc/rfc2109.txt browser must allow at minimum:
// - 300 cookies
// - 20 cookies per unique domain
// - 4096 bytes per cookie
if (cookieLength > 4096) {
$log.warn("Cookie '"+ name +"' possibly not set or overflowed because it was too large ("+
cookieLength + " > 4096 bytes)!");
}
}
}
} else {
if (rawDocument.cookie !== lastCookieString) {
lastCookieString = rawDocument.cookie;
cookieArray = lastCookieString.split("; ");
lastCookies = {};
for (i = 0; i < cookieArray.length; i++) {
cookie = cookieArray[i];
index = cookie.indexOf('=');
if (index > 0) { //ignore nameless cookies
var name = unescape(cookie.substring(0, index));
// the first value that is seen for a cookie is the most
// specific one. values for the same cookie name that
// follow are for less specific paths.
if (lastCookies[name] === undefined) {
lastCookies[name] = unescape(cookie.substring(index + 1));
}
}
}
}
return lastCookies;
}
};
/**
* @name ng.$browser#defer
* @methodOf ng.$browser
* @param {function()} fn A function, who's execution should be deferred.
* @param {number=} [delay=0] of milliseconds to defer the function execution.
* @returns {*} DeferId that can be used to cancel the task via `$browser.defer.cancel()`.
*
* @description
* Executes a fn asynchronously via `setTimeout(fn, delay)`.
*
* Unlike when calling `setTimeout` directly, in test this function is mocked and instead of using
* `setTimeout` in tests, the fns are queued in an array, which can be programmatically flushed
* via `$browser.defer.flush()`.
*
*/
self.defer = function(fn, delay) {
var timeoutId;
outstandingRequestCount++;
timeoutId = setTimeout(function() {
delete pendingDeferIds[timeoutId];
completeOutstandingRequest(fn);
}, delay || 0);
pendingDeferIds[timeoutId] = true;
return timeoutId;
};
/**
* @name ng.$browser#defer.cancel
* @methodOf ng.$browser.defer
*
* @description
* Cancels a deferred task identified with `deferId`.
*
* @param {*} deferId Token returned by the `$browser.defer` function.
* @returns {boolean} Returns `true` if the task hasn't executed yet and was successfully canceled.
*/
self.defer.cancel = function(deferId) {
if (pendingDeferIds[deferId]) {
delete pendingDeferIds[deferId];
clearTimeout(deferId);
completeOutstandingRequest(noop);
return true;
}
return false;
};
}
function $BrowserProvider(){
this.$get = ['$window', '$log', '$sniffer', '$document',
function( $window, $log, $sniffer, $document){
return new Browser($window, $document, $log, $sniffer);
}];
}
/**
* @ngdoc object
* @name ng.$cacheFactory
*
* @description
* Factory that constructs cache objects and gives access to them.
*
* <pre>
*
* var cache = $cacheFactory('cacheId');
* expect($cacheFactory.get('cacheId')).toBe(cache);
* expect($cacheFactory.get('noSuchCacheId')).not.toBeDefined();
*
* cache.put("key", "value");
* cache.put("another key", "another value");
*
* expect(cache.info()).toEqual({id: 'cacheId', size: 2}); // Since we've specified no options on creation
*
* </pre>
*
*
* @param {string} cacheId Name or id of the newly created cache.
* @param {object=} options Options object that specifies the cache behavior. Properties:
*
* - `{number=}` `capacity` — turns the cache into LRU cache.
*
* @returns {object} Newly created cache object with the following set of methods:
*
* - `{object}` `info()` — Returns id, size, and options of cache.
* - `{{*}}` `put({string} key, {*} value)` — Puts a new key-value pair into the cache and returns it.
* - `{{*}}` `get({string} key)` — Returns cached value for `key` or undefined for cache miss.
* - `{void}` `remove({string} key)` — Removes a key-value pair from the cache.
* - `{void}` `removeAll()` — Removes all cached values.
* - `{void}` `destroy()` — Removes references to this cache from $cacheFactory.
*
*/
function $CacheFactoryProvider() {
this.$get = function() {
var caches = {};
function cacheFactory(cacheId, options) {
if (cacheId in caches) {
throw minErr('$cacheFactory')('iid', "CacheId '{0}' is already taken!", cacheId);
}
var size = 0,
stats = extend({}, options, {id: cacheId}),
data = {},
capacity = (options && options.capacity) || Number.MAX_VALUE,
lruHash = {},
freshEnd = null,
staleEnd = null;
return caches[cacheId] = {
put: function(key, value) {
var lruEntry = lruHash[key] || (lruHash[key] = {key: key});
refresh(lruEntry);
if (isUndefined(value)) return;
if (!(key in data)) size++;
data[key] = value;
if (size > capacity) {
this.remove(staleEnd.key);
}
return value;
},
get: function(key) {
var lruEntry = lruHash[key];
if (!lruEntry) return;
refresh(lruEntry);
return data[key];
},
remove: function(key) {
var lruEntry = lruHash[key];
if (!lruEntry) return;
if (lruEntry == freshEnd) freshEnd = lruEntry.p;
if (lruEntry == staleEnd) staleEnd = lruEntry.n;
link(lruEntry.n,lruEntry.p);
delete lruHash[key];
delete data[key];
size--;
},
removeAll: function() {
data = {};
size = 0;
lruHash = {};
freshEnd = staleEnd = null;
},
destroy: function() {
data = null;
stats = null;
lruHash = null;
delete caches[cacheId];
},
info: function() {
return extend({}, stats, {size: size});
}
};
/**
* makes the `entry` the freshEnd of the LRU linked list
*/
function refresh(entry) {
if (entry != freshEnd) {
if (!staleEnd) {
staleEnd = entry;
} else if (staleEnd == entry) {
staleEnd = entry.n;
}
link(entry.n, entry.p);
link(entry, freshEnd);
freshEnd = entry;
freshEnd.n = null;
}
}
/**
* bidirectionally links two entries of the LRU linked list
*/
function link(nextEntry, prevEntry) {
if (nextEntry != prevEntry) {
if (nextEntry) nextEntry.p = prevEntry; //p stands for previous, 'prev' didn't minify
if (prevEntry) prevEntry.n = nextEntry; //n stands for next, 'next' didn't minify
}
}
}
/**
* @ngdoc method
* @name ng.$cacheFactory#info
* @methodOf ng.$cacheFactory
*
* @description
* Get information about all the of the caches that have been created
*
* @returns {Object} - key-value map of `cacheId` to the result of calling `cache#info`
*/
cacheFactory.info = function() {
var info = {};
forEach(caches, function(cache, cacheId) {
info[cacheId] = cache.info();
});
return info;
};
/**
* @ngdoc method
* @name ng.$cacheFactory#get
* @methodOf ng.$cacheFactory
*
* @description
* Get access to a cache object by the `cacheId` used when it was created.
*
* @param {string} cacheId Name or id of a cache to access.
* @returns {object} Cache object identified by the cacheId or undefined if no such cache.
*/
cacheFactory.get = function(cacheId) {
return caches[cacheId];
};
return cacheFactory;
};
}
/**
* @ngdoc object
* @name ng.$templateCache
*
* @description
* The first time a template is used, it is loaded in the template cache for quick retrieval. You can
* load templates directly into the cache in a `script` tag, or by consuming the `$templateCache`
* service directly.
*
* Adding via the `script` tag:
* <pre>
* <html ng-app>
* <head>
* <script type="text/ng-template" id="templateId.html">
* This is the content of the template
* </script>
* </head>
* ...
* </html>
* </pre>
*
* **Note:** the `script` tag containing the template does not need to be included in the `head` of the document, but
* it must be below the `ng-app` definition.
*
* Adding via the $templateCache service:
*
* <pre>
* var myApp = angular.module('myApp', []);
* myApp.run(function($templateCache) {
* $templateCache.put('templateId.html', 'This is the content of the template');
* });
* </pre>
*
* To retrieve the template later, simply use it in your HTML:
* <pre>
* <div ng-include=" 'templateId.html' "></div>
* </pre>
*
* or get it via Javascript:
* <pre>
* $templateCache.get('templateId.html')
* </pre>
*
* See {@link ng.$cacheFactory $cacheFactory}.
*
*/
function $TemplateCacheProvider() {
this.$get = ['$cacheFactory', function($cacheFactory) {
return $cacheFactory('templates');
}];
}
/* ! VARIABLE/FUNCTION NAMING CONVENTIONS THAT APPLY TO THIS FILE!
*
* DOM-related variables:
*
* - "node" - DOM Node
* - "element" - DOM Element or Node
* - "$node" or "$element" - jqLite-wrapped node or element
*
*
* Compiler related stuff:
*
* - "linkFn" - linking fn of a single directive
* - "nodeLinkFn" - function that aggregates all linking fns for a particular node
* - "childLinkFn" - function that aggregates all linking fns for child nodes of a particular node
* - "compositeLinkFn" - function that aggregates all linking fns for a compilation root (nodeList)
*/
/**
* @ngdoc function
* @name ng.$compile
* @function
*
* @description
* Compiles a piece of HTML string or DOM into a template and produces a template function, which
* can then be used to link {@link ng.$rootScope.Scope scope} and the template together.
*
* The compilation is a process of walking the DOM tree and trying to match DOM elements to
* {@link ng.$compileProvider#directive directives}. For each match it
* executes corresponding template function and collects the
* instance functions into a single template function which is then returned.
*
* The template function can then be used once to produce the view or as it is the case with
* {@link ng.directive:ngRepeat repeater} many-times, in which
* case each call results in a view that is a DOM clone of the original template.
*
<doc:example module="compile">
<doc:source>
<script>
// declare a new module, and inject the $compileProvider
angular.module('compile', [], function($compileProvider) {
// configure new 'compile' directive by passing a directive
// factory function. The factory function injects the '$compile'
$compileProvider.directive('compile', function($compile) {
// directive factory creates a link function
return function(scope, element, attrs) {
scope.$watch(
function(scope) {
// watch the 'compile' expression for changes
return scope.$eval(attrs.compile);
},
function(value) {
// when the 'compile' expression changes
// assign it into the current DOM
element.html(value);
// compile the new DOM and link it to the current
// scope.
// NOTE: we only compile .childNodes so that
// we don't get into infinite loop compiling ourselves
$compile(element.contents())(scope);
}
);
};
})
});
function Ctrl($scope) {
$scope.name = 'Angular';
$scope.html = 'Hello {{name}}';
}
</script>
<div ng-controller="Ctrl">
<input ng-model="name"> <br>
<textarea ng-model="html"></textarea> <br>
<div compile="html"></div>
</div>
</doc:source>
<doc:scenario>
it('should auto compile', function() {
expect(element('div[compile]').text()).toBe('Hello Angular');
input('html').enter('{{name}}!');
expect(element('div[compile]').text()).toBe('Angular!');
});
</doc:scenario>
</doc:example>
*
*
* @param {string|DOMElement} element Element or HTML string to compile into a template function.
* @param {function(angular.Scope[, cloneAttachFn]} transclude function available to directives.
* @param {number} maxPriority only apply directives lower then given priority (Only effects the
* root element(s), not their children)
* @returns {function(scope[, cloneAttachFn])} a link function which is used to bind template
* (a DOM element/tree) to a scope. Where:
*
* * `scope` - A {@link ng.$rootScope.Scope Scope} to bind to.
* * `cloneAttachFn` - If `cloneAttachFn` is provided, then the link function will clone the
* `template` and call the `cloneAttachFn` function allowing the caller to attach the
* cloned elements to the DOM document at the appropriate place. The `cloneAttachFn` is
* called as: <br> `cloneAttachFn(clonedElement, scope)` where:
*
* * `clonedElement` - is a clone of the original `element` passed into the compiler.
* * `scope` - is the current scope with which the linking function is working with.
*
* Calling the linking function returns the element of the template. It is either the original element
* passed in, or the clone of the element if the `cloneAttachFn` is provided.
*
* After linking the view is not updated until after a call to $digest which typically is done by
* Angular automatically.
*
* If you need access to the bound view, there are two ways to do it:
*
* - If you are not asking the linking function to clone the template, create the DOM element(s)
* before you send them to the compiler and keep this reference around.
* <pre>
* var element = $compile('<p>{{total}}</p>')(scope);
* </pre>
*
* - if on the other hand, you need the element to be cloned, the view reference from the original
* example would not point to the clone, but rather to the original template that was cloned. In
* this case, you can access the clone via the cloneAttachFn:
* <pre>
* var templateHTML = angular.element('<p>{{total}}</p>'),
* scope = ....;
*
* var clonedElement = $compile(templateHTML)(scope, function(clonedElement, scope) {
* //attach the clone to DOM document at the right place
* });
*
* //now we have reference to the cloned DOM via `clone`
* </pre>
*
*
* For information on how the compiler works, see the
* {@link guide/compiler Angular HTML Compiler} section of the Developer Guide.
*/
var $compileMinErr = minErr('$compile');
/**
* @ngdoc service
* @name ng.$compileProvider
* @function
*
* @description
*/
$CompileProvider.$inject = ['$provide'];
function $CompileProvider($provide) {
var hasDirectives = {},
Suffix = 'Directive',
COMMENT_DIRECTIVE_REGEXP = /^\s*directive\:\s*([\d\w\-_]+)\s+(.*)$/,
CLASS_DIRECTIVE_REGEXP = /(([\d\w\-_]+)(?:\:([^;]+))?;?)/,
aHrefSanitizationWhitelist = /^\s*(https?|ftp|mailto|file):/,
imgSrcSanitizationWhitelist = /^\s*(https?|ftp|file):|data:image\//;
// Ref: http://developers.whatwg.org/webappapis.html#event-handler-idl-attributes
// The assumption is that future DOM event attribute names will begin with
// 'on' and be composed of only English letters.
var EVENT_HANDLER_ATTR_REGEXP = /^(on[a-z]*|formaction)$/;
/**
* @ngdoc function
* @name ng.$compileProvider#directive
* @methodOf ng.$compileProvider
* @function
*
* @description
* Register a new directive with the compiler.
*
* @param {string} name Name of the directive in camel-case. (ie <code>ngBind</code> which will match as
* <code>ng-bind</code>).
* @param {function|Array} directiveFactory An injectable directive factory function. See {@link guide/directive} for more
* info.
* @returns {ng.$compileProvider} Self for chaining.
*/
this.directive = function registerDirective(name, directiveFactory) {
if (isString(name)) {
assertArg(directiveFactory, 'directiveFactory');
if (!hasDirectives.hasOwnProperty(name)) {
hasDirectives[name] = [];
$provide.factory(name + Suffix, ['$injector', '$exceptionHandler',
function($injector, $exceptionHandler) {
var directives = [];
forEach(hasDirectives[name], function(directiveFactory) {
try {
var directive = $injector.invoke(directiveFactory);
if (isFunction(directive)) {
directive = { compile: valueFn(directive) };
} else if (!directive.compile && directive.link) {
directive.compile = valueFn(directive.link);
}
directive.priority = directive.priority || 0;
directive.name = directive.name || name;
directive.require = directive.require || (directive.controller && directive.name);
directive.restrict = directive.restrict || 'A';
directives.push(directive);
} catch (e) {
$exceptionHandler(e);
}
});
return directives;
}]);
}
hasDirectives[name].push(directiveFactory);
} else {
forEach(name, reverseParams(registerDirective));
}
return this;
};
/**
* @ngdoc function
* @name ng.$compileProvider#aHrefSanitizationWhitelist
* @methodOf ng.$compileProvider
* @function
*
* @description
* Retrieves or overrides the default regular expression that is used for whitelisting of safe
* urls during a[href] sanitization.
*
* The sanitization is a security measure aimed at prevent XSS attacks via html links.
*
* Any url about to be assigned to a[href] via data-binding is first normalized and turned into
* an absolute url. Afterwards, the url is matched against the `aHrefSanitizationWhitelist`
* regular expression. If a match is found, the original url is written into the dom. Otherwise,
* the absolute url is prefixed with `'unsafe:'` string and only then is it written into the DOM.
*
* @param {RegExp=} regexp New regexp to whitelist urls with.
* @returns {RegExp|ng.$compileProvider} Current RegExp if called without value or self for
* chaining otherwise.
*/
this.aHrefSanitizationWhitelist = function(regexp) {
if (isDefined(regexp)) {
aHrefSanitizationWhitelist = regexp;
return this;
}
return aHrefSanitizationWhitelist;
};
/**
* @ngdoc function
* @name ng.$compileProvider#imgSrcSanitizationWhitelist
* @methodOf ng.$compileProvider
* @function
*
* @description
* Retrieves or overrides the default regular expression that is used for whitelisting of safe
* urls during img[src] sanitization.
*
* The sanitization is a security measure aimed at prevent XSS attacks via html links.
*
* Any url about to be assigned to img[src] via data-binding is first normalized and turned into an
* absolute url. Afterwards, the url is matched against the `imgSrcSanitizationWhitelist` regular
* expression. If a match is found, the original url is written into the dom. Otherwise, the
* absolute url is prefixed with `'unsafe:'` string and only then is it written into the DOM.
*
* @param {RegExp=} regexp New regexp to whitelist urls with.
* @returns {RegExp|ng.$compileProvider} Current RegExp if called without value or self for
* chaining otherwise.
*/
this.imgSrcSanitizationWhitelist = function(regexp) {
if (isDefined(regexp)) {
imgSrcSanitizationWhitelist = regexp;
return this;
}
return imgSrcSanitizationWhitelist;
};
this.$get = [
'$injector', '$interpolate', '$exceptionHandler', '$http', '$templateCache', '$parse',
'$controller', '$rootScope', '$document', '$sce', '$$urlUtils', '$animate',
function($injector, $interpolate, $exceptionHandler, $http, $templateCache, $parse,
$controller, $rootScope, $document, $sce, $$urlUtils, $animate) {
var Attributes = function(element, attr) {
this.$$element = element;
this.$attr = attr || {};
};
Attributes.prototype = {
$normalize: directiveNormalize,
/**
* @ngdoc function
* @name ng.$compile.directive.Attributes#$addClass
* @methodOf ng.$compile.directive.Attributes
* @function
*
* @description
* Adds the CSS class value specified by the classVal parameter to the element. If animations
* are enabled then an animation will be triggered for the class addition.
*
* @param {string} classVal The className value that will be added to the element
*/
$addClass : function(classVal) {
if(classVal && classVal.length > 0) {
$animate.addClass(this.$$element, classVal);
}
},
/**
* @ngdoc function
* @name ng.$compile.directive.Attributes#$removeClass
* @methodOf ng.$compile.directive.Attributes
* @function
*
* @description
* Removes the CSS class value specified by the classVal parameter from the element. If animations
* are enabled then an animation will be triggered for the class removal.
*
* @param {string} classVal The className value that will be removed from the element
*/
$removeClass : function(classVal) {
if(classVal && classVal.length > 0) {
$animate.removeClass(this.$$element, classVal);
}
},
/**
* Set a normalized attribute on the element in a way such that all directives
* can share the attribute. This function properly handles boolean attributes.
* @param {string} key Normalized key. (ie ngAttribute)
* @param {string|boolean} value The value to set. If `null` attribute will be deleted.
* @param {boolean=} writeAttr If false, does not write the value to DOM element attribute.
* Defaults to true.
* @param {string=} attrName Optional none normalized name. Defaults to key.
*/
$set: function(key, value, writeAttr, attrName) {
//special case for class attribute addition + removal
//so that class changes can tap into the animation
//hooks provided by the $animate service
if(key == 'class') {
value = value || '';
var current = this.$$element.attr('class') || '';
this.$removeClass(tokenDifference(current, value).join(' '));
this.$addClass(tokenDifference(value, current).join(' '));
} else {
var booleanKey = getBooleanAttrName(this.$$element[0], key),
normalizedVal,
nodeName;
if (booleanKey) {
this.$$element.prop(key, value);
attrName = booleanKey;
}
this[key] = value;
// translate normalized key to actual key
if (attrName) {
this.$attr[key] = attrName;
} else {
attrName = this.$attr[key];
if (!attrName) {
this.$attr[key] = attrName = snake_case(key, '-');
}
}
nodeName = nodeName_(this.$$element);
// sanitize a[href] and img[src] values
if ((nodeName === 'A' && key === 'href') ||
(nodeName === 'IMG' && key === 'src')) {
// NOTE: $$urlUtils.resolve() doesn't support IE < 8 so we don't sanitize for that case.
if (!msie || msie >= 8 ) {
normalizedVal = $$urlUtils.resolve(value);
if (normalizedVal !== '') {
if ((key === 'href' && !normalizedVal.match(aHrefSanitizationWhitelist)) ||
(key === 'src' && !normalizedVal.match(imgSrcSanitizationWhitelist))) {
this[key] = value = 'unsafe:' + normalizedVal;
}
}
}
}
if (writeAttr !== false) {
if (value === null || value === undefined) {
this.$$element.removeAttr(attrName);
} else {
this.$$element.attr(attrName, value);
}
}
}
// fire observers
var $$observers = this.$$observers;
$$observers && forEach($$observers[key], function(fn) {
try {
fn(value);
} catch (e) {
$exceptionHandler(e);
}
});
function tokenDifference(str1, str2) {
var values = [],
tokens1 = str1.split(/\s+/),
tokens2 = str2.split(/\s+/);
outer:
for(var i=0;i<tokens1.length;i++) {
var token = tokens1[i];
for(var j=0;j<tokens2.length;j++) {
if(token == tokens2[j]) continue outer;
}
values.push(token);
}
return values;
};
},
/**
* Observe an interpolated attribute.
* The observer will never be called, if given attribute is not interpolated.
*
* @param {string} key Normalized key. (ie ngAttribute) .
* @param {function(*)} fn Function that will be called whenever the attribute value changes.
* @returns {function(*)} the `fn` Function passed in.
*/
$observe: function(key, fn) {
var attrs = this,
$$observers = (attrs.$$observers || (attrs.$$observers = {})),
listeners = ($$observers[key] || ($$observers[key] = []));
listeners.push(fn);
$rootScope.$evalAsync(function() {
if (!listeners.$$inter) {
// no one registered attribute interpolation function, so lets call it manually
fn(attrs[key]);
}
});
return fn;
}
};
var urlSanitizationNode = $document[0].createElement('a'),
startSymbol = $interpolate.startSymbol(),
endSymbol = $interpolate.endSymbol(),
denormalizeTemplate = (startSymbol == '{{' || endSymbol == '}}')
? identity
: function denormalizeTemplate(template) {
return template.replace(/\{\{/g, startSymbol).replace(/}}/g, endSymbol);
},
NG_ATTR_BINDING = /^ngAttr[A-Z]/;
return compile;
//================================
function compile($compileNodes, transcludeFn, maxPriority, ignoreDirective) {
if (!($compileNodes instanceof jqLite)) {
// jquery always rewraps, whereas we need to preserve the original selector so that we can modify it.
$compileNodes = jqLite($compileNodes);
}
// We can not compile top level text elements since text nodes can be merged and we will
// not be able to attach scope data to them, so we will wrap them in <span>
forEach($compileNodes, function(node, index){
if (node.nodeType == 3 /* text node */ && node.nodeValue.match(/\S+/) /* non-empty */ ) {
$compileNodes[index] = node = jqLite(node).wrap('<span></span>').parent()[0];
}
});
var compositeLinkFn = compileNodes($compileNodes, transcludeFn, $compileNodes, maxPriority, ignoreDirective);
return function publicLinkFn(scope, cloneConnectFn){
assertArg(scope, 'scope');
// important!!: we must call our jqLite.clone() since the jQuery one is trying to be smart
// and sometimes changes the structure of the DOM.
var $linkNode = cloneConnectFn
? JQLitePrototype.clone.call($compileNodes) // IMPORTANT!!!
: $compileNodes;
// Attach scope only to non-text nodes.
for(var i = 0, ii = $linkNode.length; i<ii; i++) {
var node = $linkNode[i];
if (node.nodeType == 1 /* element */ || node.nodeType == 9 /* document */) {
$linkNode.eq(i).data('$scope', scope);
}
}
safeAddClass($linkNode, 'ng-scope');
if (cloneConnectFn) cloneConnectFn($linkNode, scope);
if (compositeLinkFn) compositeLinkFn(scope, $linkNode, $linkNode);
return $linkNode;
};
}
function safeAddClass($element, className) {
try {
$element.addClass(className);
} catch(e) {
// ignore, since it means that we are trying to set class on
// SVG element, where class name is read-only.
}
}
/**
* Compile function matches each node in nodeList against the directives. Once all directives
* for a particular node are collected their compile functions are executed. The compile
* functions return values - the linking functions - are combined into a composite linking
* function, which is the a linking function for the node.
*
* @param {NodeList} nodeList an array of nodes or NodeList to compile
* @param {function(angular.Scope[, cloneAttachFn]} transcludeFn A linking function, where the
* scope argument is auto-generated to the new child of the transcluded parent scope.
* @param {DOMElement=} $rootElement If the nodeList is the root of the compilation tree then the
* rootElement must be set the jqLite collection of the compile root. This is
* needed so that the jqLite collection items can be replaced with widgets.
* @param {number=} max directive priority
* @returns {?function} A composite linking function of all of the matched directives or null.
*/
function compileNodes(nodeList, transcludeFn, $rootElement, maxPriority, ignoreDirective) {
var linkFns = [],
nodeLinkFn, childLinkFn, directives, attrs, linkFnFound;
for(var i = 0; i < nodeList.length; i++) {
attrs = new Attributes();
// we must always refer to nodeList[i] since the nodes can be replaced underneath us.
directives = collectDirectives(nodeList[i], [], attrs, i == 0 ? maxPriority : undefined, ignoreDirective);
nodeLinkFn = (directives.length)
? applyDirectivesToNode(directives, nodeList[i], attrs, transcludeFn, $rootElement)
: null;
childLinkFn = (nodeLinkFn && nodeLinkFn.terminal || !nodeList[i].childNodes || !nodeList[i].childNodes.length)
? null
: compileNodes(nodeList[i].childNodes,
nodeLinkFn ? nodeLinkFn.transclude : transcludeFn);
linkFns.push(nodeLinkFn);
linkFns.push(childLinkFn);
linkFnFound = (linkFnFound || nodeLinkFn || childLinkFn);
}
// return a linking function if we have found anything, null otherwise
return linkFnFound ? compositeLinkFn : null;
function compositeLinkFn(scope, nodeList, $rootElement, boundTranscludeFn) {
var nodeLinkFn, childLinkFn, node, childScope, childTranscludeFn, i, ii, n;
// copy nodeList so that linking doesn't break due to live list updates.
var stableNodeList = [];
for (i = 0, ii = nodeList.length; i < ii; i++) {
stableNodeList.push(nodeList[i]);
}
for(i = 0, n = 0, ii = linkFns.length; i < ii; n++) {
node = stableNodeList[n];
nodeLinkFn = linkFns[i++];
childLinkFn = linkFns[i++];
if (nodeLinkFn) {
if (nodeLinkFn.scope) {
childScope = scope.$new(isObject(nodeLinkFn.scope));
jqLite(node).data('$scope', childScope);
} else {
childScope = scope;
}
childTranscludeFn = nodeLinkFn.transclude;
if (childTranscludeFn || (!boundTranscludeFn && transcludeFn)) {
nodeLinkFn(childLinkFn, childScope, node, $rootElement,
(function(transcludeFn) {
return function(cloneFn) {
var transcludeScope = scope.$new();
transcludeScope.$$transcluded = true;
return transcludeFn(transcludeScope, cloneFn).
on('$destroy', bind(transcludeScope, transcludeScope.$destroy));
};
})(childTranscludeFn || transcludeFn)
);
} else {
nodeLinkFn(childLinkFn, childScope, node, undefined, boundTranscludeFn);
}
} else if (childLinkFn) {
childLinkFn(scope, node.childNodes, undefined, boundTranscludeFn);
}
}
}
}
/**
* Looks for directives on the given node and adds them to the directive collection which is
* sorted.
*
* @param node Node to search.
* @param directives An array to which the directives are added to. This array is sorted before
* the function returns.
* @param attrs The shared attrs object which is used to populate the normalized attributes.
* @param {number=} maxPriority Max directive priority.
*/
function collectDirectives(node, directives, attrs, maxPriority, ignoreDirective) {
var nodeType = node.nodeType,
attrsMap = attrs.$attr,
match,
className;
switch(nodeType) {
case 1: /* Element */
// use the node name: <directive>
addDirective(directives,
directiveNormalize(nodeName_(node).toLowerCase()), 'E', maxPriority, ignoreDirective);
// iterate over the attributes
for (var attr, name, nName, ngAttrName, value, nAttrs = node.attributes,
j = 0, jj = nAttrs && nAttrs.length; j < jj; j++) {
var attrStartName;
var attrEndName;
var index;
attr = nAttrs[j];
if (!msie || msie >= 8 || attr.specified) {
name = attr.name;
// support ngAttr attribute binding
ngAttrName = directiveNormalize(name);
if (NG_ATTR_BINDING.test(ngAttrName)) {
name = ngAttrName.substr(6).toLowerCase();
}
if ((index = ngAttrName.lastIndexOf('Start')) != -1 && index == ngAttrName.length - 5) {
attrStartName = name;
attrEndName = name.substr(0, name.length - 5) + 'end';
name = name.substr(0, name.length - 6);
}
nName = directiveNormalize(name.toLowerCase());
attrsMap[nName] = name;
attrs[nName] = value = trim((msie && name == 'href')
? decodeURIComponent(node.getAttribute(name, 2))
: attr.value);
if (getBooleanAttrName(node, nName)) {
attrs[nName] = true; // presence means true
}
addAttrInterpolateDirective(node, directives, value, nName);
addDirective(directives, nName, 'A', maxPriority, ignoreDirective, attrStartName, attrEndName);
}
}
// use class as directive
className = node.className;
if (isString(className) && className !== '') {
while (match = CLASS_DIRECTIVE_REGEXP.exec(className)) {
nName = directiveNormalize(match[2]);
if (addDirective(directives, nName, 'C', maxPriority, ignoreDirective)) {
attrs[nName] = trim(match[3]);
}
className = className.substr(match.index + match[0].length);
}
}
break;
case 3: /* Text Node */
addTextInterpolateDirective(directives, node.nodeValue);
break;
case 8: /* Comment */
try {
match = COMMENT_DIRECTIVE_REGEXP.exec(node.nodeValue);
if (match) {
nName = directiveNormalize(match[1]);
if (addDirective(directives, nName, 'M', maxPriority, ignoreDirective)) {
attrs[nName] = trim(match[2]);
}
}
} catch (e) {
// turns out that under some circumstances IE9 throws errors when one attempts to read comment's node value.
// Just ignore it and continue. (Can't seem to reproduce in test case.)
}
break;
}
directives.sort(byPriority);
return directives;
}
/**
* Given a node with an directive-start it collects all of the siblings until it find directive-end.
* @param node
* @param attrStart
* @param attrEnd
* @returns {*}
*/
function groupScan(node, attrStart, attrEnd) {
var nodes = [];
var depth = 0;
if (attrStart && node.hasAttribute && node.hasAttribute(attrStart)) {
var startNode = node;
do {
if (!node) {
throw $compileMinErr('uterdir', "Unterminated attribute, found '{0}' but no matching '{1}' found.", attrStart, attrEnd);
}
if (node.nodeType == 1 /** Element **/) {
if (node.hasAttribute(attrStart)) depth++;
if (node.hasAttribute(attrEnd)) depth--;
}
nodes.push(node);
node = node.nextSibling;
} while (depth > 0);
} else {
nodes.push(node);
}
return jqLite(nodes);
}
/**
* Wrapper for linking function which converts normal linking function into a grouped
* linking function.
* @param linkFn
* @param attrStart
* @param attrEnd
* @returns {Function}
*/
function groupElementsLinkFnWrapper(linkFn, attrStart, attrEnd) {
return function(scope, element, attrs, controllers) {
element = groupScan(element[0], attrStart, attrEnd);
return linkFn(scope, element, attrs, controllers);
}
}
/**
* Once the directives have been collected, their compile functions are executed. This method
* is responsible for inlining directive templates as well as terminating the application
* of the directives if the terminal directive has been reached.
*
* @param {Array} directives Array of collected directives to execute their compile function.
* this needs to be pre-sorted by priority order.
* @param {Node} compileNode The raw DOM node to apply the compile functions to
* @param {Object} templateAttrs The shared attribute function
* @param {function(angular.Scope[, cloneAttachFn]} transcludeFn A linking function, where the
* scope argument is auto-generated to the new child of the transcluded parent scope.
* @param {JQLite} jqCollection If we are working on the root of the compile tree then this
* argument has the root jqLite array so that we can replace nodes on it.
* @returns linkFn
*/
function applyDirectivesToNode(directives, compileNode, templateAttrs, transcludeFn, jqCollection, originalReplaceDirective) {
var terminalPriority = -Number.MAX_VALUE,
preLinkFns = [],
postLinkFns = [],
newScopeDirective = null,
newIsolateScopeDirective = null,
templateDirective = null,
$compileNode = templateAttrs.$$element = jqLite(compileNode),
directive,
directiveName,
$template,
transcludeDirective,
replaceDirective = originalReplaceDirective,
childTranscludeFn = transcludeFn,
controllerDirectives,
linkFn,
directiveValue;
// executes all directives on the current element
for(var i = 0, ii = directives.length; i < ii; i++) {
directive = directives[i];
var attrStart = directive.$$start;
var attrEnd = directive.$$end;
// collect multiblock sections
if (attrStart) {
$compileNode = groupScan(compileNode, attrStart, attrEnd)
}
$template = undefined;
if (terminalPriority > directive.priority) {
break; // prevent further processing of directives
}
if (directiveValue = directive.scope) {
assertNoDuplicate('isolated scope', newIsolateScopeDirective, directive, $compileNode);
if (isObject(directiveValue)) {
safeAddClass($compileNode, 'ng-isolate-scope');
newIsolateScopeDirective = directive;
}
safeAddClass($compileNode, 'ng-scope');
newScopeDirective = newScopeDirective || directive;
}
directiveName = directive.name;
if (directiveValue = directive.controller) {
controllerDirectives = controllerDirectives || {};
assertNoDuplicate("'" + directiveName + "' controller",
controllerDirectives[directiveName], directive, $compileNode);
controllerDirectives[directiveName] = directive;
}
if (directiveValue = directive.transclude) {
assertNoDuplicate('transclusion', transcludeDirective, directive, $compileNode);
transcludeDirective = directive;
terminalPriority = directive.priority;
if (directiveValue == 'element') {
$template = groupScan(compileNode, attrStart, attrEnd)
$compileNode = templateAttrs.$$element =
jqLite(document.createComment(' ' + directiveName + ': ' + templateAttrs[directiveName] + ' '));
compileNode = $compileNode[0];
replaceWith(jqCollection, jqLite(sliceArgs($template)), compileNode);
childTranscludeFn = compile($template, transcludeFn, terminalPriority,
replaceDirective && replaceDirective.name);
} else {
$template = jqLite(JQLiteClone(compileNode)).contents();
$compileNode.html(''); // clear contents
childTranscludeFn = compile($template, transcludeFn);
}
}
if (directive.template) {
assertNoDuplicate('template', templateDirective, directive, $compileNode);
templateDirective = directive;
directiveValue = (isFunction(directive.template))
? directive.template($compileNode, templateAttrs)
: directive.template;
directiveValue = denormalizeTemplate(directiveValue);
if (directive.replace) {
replaceDirective = directive;
$template = jqLite('<div>' +
trim(directiveValue) +
'</div>').contents();
compileNode = $template[0];
if ($template.length != 1 || compileNode.nodeType !== 1) {
throw $compileMinErr('tplrt', "Template for directive '{0}' must have exactly one root element. {1}", directiveName, '');
}
replaceWith(jqCollection, $compileNode, compileNode);
var newTemplateAttrs = {$attr: {}};
// combine directives from the original node and from the template:
// - take the array of directives for this element
// - split it into two parts, those that were already applied and those that weren't
// - collect directives from the template, add them to the second group and sort them
// - append the second group with new directives to the first group
directives = directives.concat(
collectDirectives(
compileNode,
directives.splice(i + 1, directives.length - (i + 1)),
newTemplateAttrs
)
);
mergeTemplateAttributes(templateAttrs, newTemplateAttrs);
ii = directives.length;
} else {
$compileNode.html(directiveValue);
}
}
if (directive.templateUrl) {
assertNoDuplicate('template', templateDirective, directive, $compileNode);
templateDirective = directive;
if (directive.replace) {
replaceDirective = directive;
}
nodeLinkFn = compileTemplateUrl(directives.splice(i, directives.length - i),
nodeLinkFn, $compileNode, templateAttrs, jqCollection, childTranscludeFn);
ii = directives.length;
} else if (directive.compile) {
try {
linkFn = directive.compile($compileNode, templateAttrs, childTranscludeFn);
if (isFunction(linkFn)) {
addLinkFns(null, linkFn, attrStart, attrEnd);
} else if (linkFn) {
addLinkFns(linkFn.pre, linkFn.post, attrStart, attrEnd);
}
} catch (e) {
$exceptionHandler(e, startingTag($compileNode));
}
}
if (directive.terminal) {
nodeLinkFn.terminal = true;
terminalPriority = Math.max(terminalPriority, directive.priority);
}
}
nodeLinkFn.scope = newScopeDirective && newScopeDirective.scope;
nodeLinkFn.transclude = transcludeDirective && childTranscludeFn;
// might be normal or delayed nodeLinkFn depending on if templateUrl is present
return nodeLinkFn;
////////////////////
function addLinkFns(pre, post, attrStart, attrEnd) {
if (pre) {
if (attrStart) pre = groupElementsLinkFnWrapper(pre, attrStart, attrEnd);
pre.require = directive.require;
preLinkFns.push(pre);
}
if (post) {
if (attrStart) post = groupElementsLinkFnWrapper(post, attrStart, attrEnd);
post.require = directive.require;
postLinkFns.push(post);
}
}
function getControllers(require, $element) {
var value, retrievalMethod = 'data', optional = false;
if (isString(require)) {
while((value = require.charAt(0)) == '^' || value == '?') {
require = require.substr(1);
if (value == '^') {
retrievalMethod = 'inheritedData';
}
optional = optional || value == '?';
}
value = $element[retrievalMethod]('$' + require + 'Controller');
if (!value && !optional) {
throw $compileMinErr('ctreq', "Controller '{0}', required by directive '{1}', can't be found!", require, directiveName);
}
return value;
} else if (isArray(require)) {
value = [];
forEach(require, function(require) {
value.push(getControllers(require, $element));
});
}
return value;
}
function nodeLinkFn(childLinkFn, scope, linkNode, $rootElement, boundTranscludeFn) {
var attrs, $element, i, ii, linkFn, controller;
if (compileNode === linkNode) {
attrs = templateAttrs;
} else {
attrs = shallowCopy(templateAttrs, new Attributes(jqLite(linkNode), templateAttrs.$attr));
}
$element = attrs.$$element;
if (newIsolateScopeDirective) {
var LOCAL_REGEXP = /^\s*([@=&])(\??)\s*(\w*)\s*$/;
var parentScope = scope.$parent || scope;
forEach(newIsolateScopeDirective.scope, function(definition, scopeName) {
var match = definition.match(LOCAL_REGEXP) || [],
attrName = match[3] || scopeName,
optional = (match[2] == '?'),
mode = match[1], // @, =, or &
lastValue,
parentGet, parentSet;
scope.$$isolateBindings[scopeName] = mode + attrName;
switch (mode) {
case '@': {
attrs.$observe(attrName, function(value) {
scope[scopeName] = value;
});
attrs.$$observers[attrName].$$scope = parentScope;
if( attrs[attrName] ) {
// If the attribute has been provided then we trigger an interpolation to ensure the value is there for use in the link fn
scope[scopeName] = $interpolate(attrs[attrName])(parentScope);
}
break;
}
case '=': {
if (optional && !attrs[attrName]) {
return;
}
parentGet = $parse(attrs[attrName]);
parentSet = parentGet.assign || function() {
// reset the change, or we will throw this exception on every $digest
lastValue = scope[scopeName] = parentGet(parentScope);
throw $compileMinErr('nonassign', "Expression '{0}' used with directive '{1}' is non-assignable!",
attrs[attrName], newIsolateScopeDirective.name);
};
lastValue = scope[scopeName] = parentGet(parentScope);
scope.$watch(function parentValueWatch() {
var parentValue = parentGet(parentScope);
if (parentValue !== scope[scopeName]) {
// we are out of sync and need to copy
if (parentValue !== lastValue) {
// parent changed and it has precedence
lastValue = scope[scopeName] = parentValue;
} else {
// if the parent can be assigned then do so
parentSet(parentScope, parentValue = lastValue = scope[scopeName]);
}
}
return parentValue;
});
break;
}
case '&': {
parentGet = $parse(attrs[attrName]);
scope[scopeName] = function(locals) {
return parentGet(parentScope, locals);
};
break;
}
default: {
throw $compileMinErr('iscp', "Invalid isolate scope definition for directive '{0}'. Definition: {... {1}: '{2}' ...}",
newIsolateScopeDirective.name, scopeName, definition);
}
}
});
}
if (controllerDirectives) {
forEach(controllerDirectives, function(directive) {
var locals = {
$scope: scope,
$element: $element,
$attrs: attrs,
$transclude: boundTranscludeFn
}, controllerInstance;
controller = directive.controller;
if (controller == '@') {
controller = attrs[directive.name];
}
controllerInstance = $controller(controller, locals);
$element.data(
'$' + directive.name + 'Controller',
controllerInstance);
if (directive.controllerAs) {
locals.$scope[directive.controllerAs] = controllerInstance;
}
});
}
// PRELINKING
for(i = 0, ii = preLinkFns.length; i < ii; i++) {
try {
linkFn = preLinkFns[i];
linkFn(scope, $element, attrs,
linkFn.require && getControllers(linkFn.require, $element));
} catch (e) {
$exceptionHandler(e, startingTag($element));
}
}
// RECURSION
childLinkFn && childLinkFn(scope, linkNode.childNodes, undefined, boundTranscludeFn);
// POSTLINKING
for(i = 0, ii = postLinkFns.length; i < ii; i++) {
try {
linkFn = postLinkFns[i];
linkFn(scope, $element, attrs,
linkFn.require && getControllers(linkFn.require, $element));
} catch (e) {
$exceptionHandler(e, startingTag($element));
}
}
}
}
/**
* looks up the directive and decorates it with exception handling and proper parameters. We
* call this the boundDirective.
*
* @param {string} name name of the directive to look up.
* @param {string} location The directive must be found in specific format.
* String containing any of theses characters:
*
* * `E`: element name
* * `A': attribute
* * `C`: class
* * `M`: comment
* @returns true if directive was added.
*/
function addDirective(tDirectives, name, location, maxPriority, ignoreDirective, startAttrName, endAttrName) {
if (name === ignoreDirective) return null;
var match = null;
if (hasDirectives.hasOwnProperty(name)) {
for(var directive, directives = $injector.get(name + Suffix),
i = 0, ii = directives.length; i<ii; i++) {
try {
directive = directives[i];
if ( (maxPriority === undefined || maxPriority > directive.priority) &&
directive.restrict.indexOf(location) != -1) {
if (startAttrName) {
directive = inherit(directive, {$$start: startAttrName, $$end: endAttrName});
}
tDirectives.push(directive);
match = directive;
}
} catch(e) { $exceptionHandler(e); }
}
}
return match;
}
/**
* When the element is replaced with HTML template then the new attributes
* on the template need to be merged with the existing attributes in the DOM.
* The desired effect is to have both of the attributes present.
*
* @param {object} dst destination attributes (original DOM)
* @param {object} src source attributes (from the directive template)
*/
function mergeTemplateAttributes(dst, src) {
var srcAttr = src.$attr,
dstAttr = dst.$attr,
$element = dst.$$element;
// reapply the old attributes to the new element
forEach(dst, function(value, key) {
if (key.charAt(0) != '$') {
if (src[key]) {
value += (key === 'style' ? ';' : ' ') + src[key];
}
dst.$set(key, value, true, srcAttr[key]);
}
});
// copy the new attributes on the old attrs object
forEach(src, function(value, key) {
if (key == 'class') {
safeAddClass($element, value);
dst['class'] = (dst['class'] ? dst['class'] + ' ' : '') + value;
} else if (key == 'style') {
$element.attr('style', $element.attr('style') + ';' + value);
} else if (key.charAt(0) != '$' && !dst.hasOwnProperty(key)) {
dst[key] = value;
dstAttr[key] = srcAttr[key];
}
});
}
function compileTemplateUrl(directives, beforeTemplateNodeLinkFn, $compileNode, tAttrs,
$rootElement, childTranscludeFn) {
var linkQueue = [],
afterTemplateNodeLinkFn,
afterTemplateChildLinkFn,
beforeTemplateCompileNode = $compileNode[0],
origAsyncDirective = directives.shift(),
// The fact that we have to copy and patch the directive seems wrong!
derivedSyncDirective = extend({}, origAsyncDirective, {
controller: null, templateUrl: null, transclude: null, scope: null, replace: null
}),
templateUrl = (isFunction(origAsyncDirective.templateUrl))
? origAsyncDirective.templateUrl($compileNode, tAttrs)
: origAsyncDirective.templateUrl;
$compileNode.html('');
$http.get($sce.getTrustedResourceUrl(templateUrl), {cache: $templateCache}).
success(function(content) {
var compileNode, tempTemplateAttrs, $template;
content = denormalizeTemplate(content);
if (origAsyncDirective.replace) {
$template = jqLite('<div>' + trim(content) + '</div>').contents();
compileNode = $template[0];
if ($template.length != 1 || compileNode.nodeType !== 1) {
throw $compileMinErr('tplrt', "Template for directive '{0}' must have exactly one root element. {1}",
origAsyncDirective.name, templateUrl);
}
tempTemplateAttrs = {$attr: {}};
replaceWith($rootElement, $compileNode, compileNode);
collectDirectives(compileNode, directives, tempTemplateAttrs);
mergeTemplateAttributes(tAttrs, tempTemplateAttrs);
} else {
compileNode = beforeTemplateCompileNode;
$compileNode.html(content);
}
directives.unshift(derivedSyncDirective);
afterTemplateNodeLinkFn = applyDirectivesToNode(directives, compileNode, tAttrs, childTranscludeFn, $compileNode, origAsyncDirective);
forEach($rootElement, function(node, i) {
if (node == compileNode) {
$rootElement[i] = $compileNode[0];
}
});
afterTemplateChildLinkFn = compileNodes($compileNode[0].childNodes, childTranscludeFn);
while(linkQueue.length) {
var scope = linkQueue.shift(),
beforeTemplateLinkNode = linkQueue.shift(),
linkRootElement = linkQueue.shift(),
controller = linkQueue.shift(),
linkNode = $compileNode[0];
if (beforeTemplateLinkNode !== beforeTemplateCompileNode) {
// it was cloned therefore we have to clone as well.
linkNode = JQLiteClone(compileNode);
replaceWith(linkRootElement, jqLite(beforeTemplateLinkNode), linkNode);
}
afterTemplateNodeLinkFn(
beforeTemplateNodeLinkFn(afterTemplateChildLinkFn, scope, linkNode, $rootElement, controller),
scope, linkNode, $rootElement, controller
);
}
linkQueue = null;
}).
error(function(response, code, headers, config) {
throw $compileMinErr('tpload', 'Failed to load template: {0}', config.url);
});
return function delayedNodeLinkFn(ignoreChildLinkFn, scope, node, rootElement, controller) {
if (linkQueue) {
linkQueue.push(scope);
linkQueue.push(node);
linkQueue.push(rootElement);
linkQueue.push(controller);
} else {
afterTemplateNodeLinkFn(function() {
beforeTemplateNodeLinkFn(afterTemplateChildLinkFn, scope, node, rootElement, controller);
}, scope, node, rootElement, controller);
}
};
}
/**
* Sorting function for bound directives.
*/
function byPriority(a, b) {
return b.priority - a.priority;
}
function assertNoDuplicate(what, previousDirective, directive, element) {
if (previousDirective) {
throw $compileMinErr('multidir', 'Multiple directives [{0}, {1}] asking for {2} on: {3}',
previousDirective.name, directive.name, what, startingTag(element));
}
}
function addTextInterpolateDirective(directives, text) {
var interpolateFn = $interpolate(text, true);
if (interpolateFn) {
directives.push({
priority: 0,
compile: valueFn(function textInterpolateLinkFn(scope, node) {
var parent = node.parent(),
bindings = parent.data('$binding') || [];
bindings.push(interpolateFn);
safeAddClass(parent.data('$binding', bindings), 'ng-binding');
scope.$watch(interpolateFn, function interpolateFnWatchAction(value) {
node[0].nodeValue = value;
});
})
});
}
}
function getTrustedContext(node, attrNormalizedName) {
// maction[xlink:href] can source SVG. It's not limited to <maction>.
if (attrNormalizedName == "xlinkHref" ||
(nodeName_(node) != "IMG" && (attrNormalizedName == "src" ||
attrNormalizedName == "ngSrc"))) {
return $sce.RESOURCE_URL;
}
}
function addAttrInterpolateDirective(node, directives, value, name) {
var interpolateFn = $interpolate(value, true);
// no interpolation found -> ignore
if (!interpolateFn) return;
if (name === "multiple" && nodeName_(node) === "SELECT") {
throw $compileMinErr("selmulti", "Binding to the 'multiple' attribute is not supported. Element: {0}",
startingTag(node));
}
directives.push({
priority: 100,
compile: valueFn(function attrInterpolateLinkFn(scope, element, attr) {
var $$observers = (attr.$$observers || (attr.$$observers = {}));
if (EVENT_HANDLER_ATTR_REGEXP.test(name)) {
throw $compileMinErr('nodomevents',
"Interpolations for HTML DOM event attributes are disallowed. Please use the ng- " +
"versions (such as ng-click instead of onclick) instead.");
}
// we need to interpolate again, in case the attribute value has been updated
// (e.g. by another directive's compile function)
interpolateFn = $interpolate(attr[name], true, getTrustedContext(node, name));
// if attribute was updated so that there is no interpolation going on we don't want to
// register any observers
if (!interpolateFn) return;
attr[name] = interpolateFn(scope);
($$observers[name] || ($$observers[name] = [])).$$inter = true;
(attr.$$observers && attr.$$observers[name].$$scope || scope).
$watch(interpolateFn, function interpolateFnWatchAction(value) {
attr.$set(name, value);
});
})
});
}
/**
* This is a special jqLite.replaceWith, which can replace items which
* have no parents, provided that the containing jqLite collection is provided.
*
* @param {JqLite=} $rootElement The root of the compile tree. Used so that we can replace nodes
* in the root of the tree.
* @param {JqLite} elementsToRemove The jqLite element which we are going to replace. We keep the shell,
* but replace its DOM node reference.
* @param {Node} newNode The new DOM node.
*/
function replaceWith($rootElement, elementsToRemove, newNode) {
var firstElementToRemove = elementsToRemove[0],
removeCount = elementsToRemove.length,
parent = firstElementToRemove.parentNode,
i, ii;
if ($rootElement) {
for(i = 0, ii = $rootElement.length; i < ii; i++) {
if ($rootElement[i] == firstElementToRemove) {
$rootElement[i++] = newNode;
for (var j = i, j2 = j + removeCount - 1,
jj = $rootElement.length;
j < jj; j++, j2++) {
if (j2 < jj) {
$rootElement[j] = $rootElement[j2];
} else {
delete $rootElement[j];
}
}
$rootElement.length -= removeCount - 1;
break;
}
}
}
if (parent) {
parent.replaceChild(newNode, firstElementToRemove);
}
var fragment = document.createDocumentFragment();
fragment.appendChild(firstElementToRemove);
newNode[jqLite.expando] = firstElementToRemove[jqLite.expando];
for (var k = 1, kk = elementsToRemove.length; k < kk; k++) {
var element = elementsToRemove[k];
jqLite(element).remove(); // must do this way to clean up expando
fragment.appendChild(element);
delete elementsToRemove[k];
}
elementsToRemove[0] = newNode;
elementsToRemove.length = 1
}
}];
}
var PREFIX_REGEXP = /^(x[\:\-_]|data[\:\-_])/i;
/**
* Converts all accepted directives format into proper directive name.
* All of these will become 'myDirective':
* my:Directive
* my-directive
* x-my-directive
* data-my:directive
*
* Also there is special case for Moz prefix starting with upper case letter.
* @param name Name to normalize
*/
function directiveNormalize(name) {
return camelCase(name.replace(PREFIX_REGEXP, ''));
}
/**
* @ngdoc object
* @name ng.$compile.directive.Attributes
* @description
*
* A shared object between directive compile / linking functions which contains normalized DOM element
* attributes. The the values reflect current binding state `{{ }}`. The normalization is needed
* since all of these are treated as equivalent in Angular:
*
* <span ng:bind="a" ng-bind="a" data-ng-bind="a" x-ng-bind="a">
*/
/**
* @ngdoc property
* @name ng.$compile.directive.Attributes#$attr
* @propertyOf ng.$compile.directive.Attributes
* @returns {object} A map of DOM element attribute names to the normalized name. This is
* needed to do reverse lookup from normalized name back to actual name.
*/
/**
* @ngdoc function
* @name ng.$compile.directive.Attributes#$set
* @methodOf ng.$compile.directive.Attributes
* @function
*
* @description
* Set DOM element attribute value.
*
*
* @param {string} name Normalized element attribute name of the property to modify. The name is
* revers translated using the {@link ng.$compile.directive.Attributes#$attr $attr}
* property to the original name.
* @param {string} value Value to set the attribute to. The value can be an interpolated string.
*/
/**
* Closure compiler type information
*/
function nodesetLinkingFn(
/* angular.Scope */ scope,
/* NodeList */ nodeList,
/* Element */ rootElement,
/* function(Function) */ boundTranscludeFn
){}
function directiveLinkingFn(
/* nodesetLinkingFn */ nodesetLinkingFn,
/* angular.Scope */ scope,
/* Node */ node,
/* Element */ rootElement,
/* function(Function) */ boundTranscludeFn
){}
/**
* @ngdoc object
* @name ng.$controllerProvider
* @description
* The {@link ng.$controller $controller service} is used by Angular to create new
* controllers.
*
* This provider allows controller registration via the
* {@link ng.$controllerProvider#register register} method.
*/
function $ControllerProvider() {
var controllers = {},
CNTRL_REG = /^(\S+)(\s+as\s+(\w+))?$/;
/**
* @ngdoc function
* @name ng.$controllerProvider#register
* @methodOf ng.$controllerProvider
* @param {string} name Controller name
* @param {Function|Array} constructor Controller constructor fn (optionally decorated with DI
* annotations in the array notation).
*/
this.register = function(name, constructor) {
if (isObject(name)) {
extend(controllers, name)
} else {
controllers[name] = constructor;
}
};
this.$get = ['$injector', '$window', function($injector, $window) {
/**
* @ngdoc function
* @name ng.$controller
* @requires $injector
*
* @param {Function|string} constructor If called with a function then it's considered to be the
* controller constructor function. Otherwise it's considered to be a string which is used
* to retrieve the controller constructor using the following steps:
*
* * check if a controller with given name is registered via `$controllerProvider`
* * check if evaluating the string on the current scope returns a constructor
* * check `window[constructor]` on the global `window` object
*
* @param {Object} locals Injection locals for Controller.
* @return {Object} Instance of given controller.
*
* @description
* `$controller` service is responsible for instantiating controllers.
*
* It's just a simple call to {@link AUTO.$injector $injector}, but extracted into
* a service, so that one can override this service with {@link https://gist.github.com/1649788
* BC version}.
*/
return function(expression, locals) {
var instance, match, constructor, identifier;
if(isString(expression)) {
match = expression.match(CNTRL_REG),
constructor = match[1],
identifier = match[3];
expression = controllers.hasOwnProperty(constructor)
? controllers[constructor]
: getter(locals.$scope, constructor, true) || getter($window, constructor, true);
assertArgFn(expression, constructor, true);
}
instance = $injector.instantiate(expression, locals);
if (identifier) {
if (!(locals && typeof locals.$scope == 'object')) {
throw minErr('$controller')('noscp', "Cannot export controller '{0}' as '{1}'! No $scope object provided via `locals`.", constructor || expression.name, identifier);
}
locals.$scope[identifier] = instance;
}
return instance;
};
}];
}
/**
* @ngdoc object
* @name ng.$document
* @requires $window
*
* @description
* A {@link angular.element jQuery (lite)}-wrapped reference to the browser's `window.document`
* element.
*/
function $DocumentProvider(){
this.$get = ['$window', function(window){
return jqLite(window.document);
}];
}
/**
* @ngdoc function
* @name ng.$exceptionHandler
* @requires $log
*
* @description
* Any uncaught exception in angular expressions is delegated to this service.
* The default implementation simply delegates to `$log.error` which logs it into
* the browser console.
*
* In unit tests, if `angular-mocks.js` is loaded, this service is overridden by
* {@link ngMock.$exceptionHandler mock $exceptionHandler} which aids in testing.
*
* @param {Error} exception Exception associated with the error.
* @param {string=} cause optional information about the context in which
* the error was thrown.
*
*/
function $ExceptionHandlerProvider() {
this.$get = ['$log', function($log) {
return function(exception, cause) {
$log.error.apply($log, arguments);
};
}];
}
/**
* Parse headers into key value object
*
* @param {string} headers Raw headers as a string
* @returns {Object} Parsed headers as key value object
*/
function parseHeaders(headers) {
var parsed = {}, key, val, i;
if (!headers) return parsed;
forEach(headers.split('\n'), function(line) {
i = line.indexOf(':');
key = lowercase(trim(line.substr(0, i)));
val = trim(line.substr(i + 1));
if (key) {
if (parsed[key]) {
parsed[key] += ', ' + val;
} else {
parsed[key] = val;
}
}
});
return parsed;
}
/**
* Returns a function that provides access to parsed headers.
*
* Headers are lazy parsed when first requested.
* @see parseHeaders
*
* @param {(string|Object)} headers Headers to provide access to.
* @returns {function(string=)} Returns a getter function which if called with:
*
* - if called with single an argument returns a single header value or null
* - if called with no arguments returns an object containing all headers.
*/
function headersGetter(headers) {
var headersObj = isObject(headers) ? headers : undefined;
return function(name) {
if (!headersObj) headersObj = parseHeaders(headers);
if (name) {
return headersObj[lowercase(name)] || null;
}
return headersObj;
};
}
/**
* Chain all given functions
*
* This function is used for both request and response transforming
*
* @param {*} data Data to transform.
* @param {function(string=)} headers Http headers getter fn.
* @param {(function|Array.<function>)} fns Function or an array of functions.
* @returns {*} Transformed data.
*/
function transformData(data, headers, fns) {
if (isFunction(fns))
return fns(data, headers);
forEach(fns, function(fn) {
data = fn(data, headers);
});
return data;
}
function isSuccess(status) {
return 200 <= status && status < 300;
}
function $HttpProvider() {
var JSON_START = /^\s*(\[|\{[^\{])/,
JSON_END = /[\}\]]\s*$/,
PROTECTION_PREFIX = /^\)\]\}',?\n/,
CONTENT_TYPE_APPLICATION_JSON = {'Content-Type': 'application/json;charset=utf-8'};
var defaults = this.defaults = {
// transform incoming response data
transformResponse: [function(data) {
if (isString(data)) {
// strip json vulnerability protection prefix
data = data.replace(PROTECTION_PREFIX, '');
if (JSON_START.test(data) && JSON_END.test(data))
data = fromJson(data, true);
}
return data;
}],
// transform outgoing request data
transformRequest: [function(d) {
return isObject(d) && !isFile(d) ? toJson(d) : d;
}],
// default headers
headers: {
common: {
'Accept': 'application/json, text/plain, */*'
},
post: CONTENT_TYPE_APPLICATION_JSON,
put: CONTENT_TYPE_APPLICATION_JSON,
patch: CONTENT_TYPE_APPLICATION_JSON
},
xsrfCookieName: 'XSRF-TOKEN',
xsrfHeaderName: 'X-XSRF-TOKEN'
};
/**
* Are order by request. I.E. they are applied in the same order as
* array on request, but revers order on response.
*/
var interceptorFactories = this.interceptors = [];
/**
* For historical reasons, response interceptors ordered by the order in which
* they are applied to response. (This is in revers to interceptorFactories)
*/
var responseInterceptorFactories = this.responseInterceptors = [];
this.$get = ['$httpBackend', '$browser', '$cacheFactory', '$rootScope', '$q', '$injector', '$$urlUtils',
function($httpBackend, $browser, $cacheFactory, $rootScope, $q, $injector, $$urlUtils) {
var defaultCache = $cacheFactory('$http');
/**
* Interceptors stored in reverse order. Inner interceptors before outer interceptors.
* The reversal is needed so that we can build up the interception chain around the
* server request.
*/
var reversedInterceptors = [];
forEach(interceptorFactories, function(interceptorFactory) {
reversedInterceptors.unshift(isString(interceptorFactory)
? $injector.get(interceptorFactory) : $injector.invoke(interceptorFactory));
});
forEach(responseInterceptorFactories, function(interceptorFactory, index) {
var responseFn = isString(interceptorFactory)
? $injector.get(interceptorFactory)
: $injector.invoke(interceptorFactory);
/**
* Response interceptors go before "around" interceptors (no real reason, just
* had to pick one.) But they are already reversed, so we can't use unshift, hence
* the splice.
*/
reversedInterceptors.splice(index, 0, {
response: function(response) {
return responseFn($q.when(response));
},
responseError: function(response) {
return responseFn($q.reject(response));
}
});
});
/**
* @ngdoc function
* @name ng.$http
* @requires $httpBackend
* @requires $browser
* @requires $cacheFactory
* @requires $rootScope
* @requires $q
* @requires $injector
*
* @description
* The `$http` service is a core Angular service that facilitates communication with the remote
* HTTP servers via the browser's {@link https://developer.mozilla.org/en/xmlhttprequest
* XMLHttpRequest} object or via {@link http://en.wikipedia.org/wiki/JSONP JSONP}.
*
* For unit testing applications that use `$http` service, see
* {@link ngMock.$httpBackend $httpBackend mock}.
*
* For a higher level of abstraction, please check out the {@link ngResource.$resource
* $resource} service.
*
* The $http API is based on the {@link ng.$q deferred/promise APIs} exposed by
* the $q service. While for simple usage patterns this doesn't matter much, for advanced usage
* it is important to familiarize yourself with these APIs and the guarantees they provide.
*
*
* # General usage
* The `$http` service is a function which takes a single argument — a configuration object —
* that is used to generate an HTTP request and returns a {@link ng.$q promise}
* with two $http specific methods: `success` and `error`.
*
* <pre>
* $http({method: 'GET', url: '/someUrl'}).
* success(function(data, status, headers, config) {
* // this callback will be called asynchronously
* // when the response is available
* }).
* error(function(data, status, headers, config) {
* // called asynchronously if an error occurs
* // or server returns response with an error status.
* });
* </pre>
*
* Since the returned value of calling the $http function is a `promise`, you can also use
* the `then` method to register callbacks, and these callbacks will receive a single argument –
* an object representing the response. See the API signature and type info below for more
* details.
*
* A response status code between 200 and 299 is considered a success status and
* will result in the success callback being called. Note that if the response is a redirect,
* XMLHttpRequest will transparently follow it, meaning that the error callback will not be
* called for such responses.
*
* # Shortcut methods
*
* Since all invocations of the $http service require passing in an HTTP method and URL, and
* POST/PUT requests require request data to be provided as well, shortcut methods
* were created:
*
* <pre>
* $http.get('/someUrl').success(successCallback);
* $http.post('/someUrl', data).success(successCallback);
* </pre>
*
* Complete list of shortcut methods:
*
* - {@link ng.$http#get $http.get}
* - {@link ng.$http#head $http.head}
* - {@link ng.$http#post $http.post}
* - {@link ng.$http#put $http.put}
* - {@link ng.$http#delete $http.delete}
* - {@link ng.$http#jsonp $http.jsonp}
*
*
* # Setting HTTP Headers
*
* The $http service will automatically add certain HTTP headers to all requests. These defaults
* can be fully configured by accessing the `$httpProvider.defaults.headers` configuration
* object, which currently contains this default configuration:
*
* - `$httpProvider.defaults.headers.common` (headers that are common for all requests):
* - `Accept: application/json, text/plain, * / *`
* - `$httpProvider.defaults.headers.post`: (header defaults for POST requests)
* - `Content-Type: application/json`
* - `$httpProvider.defaults.headers.put` (header defaults for PUT requests)
* - `Content-Type: application/json`
*
* To add or overwrite these defaults, simply add or remove a property from these configuration
* objects. To add headers for an HTTP method other than POST or PUT, simply add a new object
* with the lowercased HTTP method name as the key, e.g.
* `$httpProvider.defaults.headers.get['My-Header']='value'`.
*
* Additionally, the defaults can be set at runtime via the `$http.defaults` object in the same
* fashion.
*
*
* # Transforming Requests and Responses
*
* Both requests and responses can be transformed using transform functions. By default, Angular
* applies these transformations:
*
* Request transformations:
*
* - If the `data` property of the request configuration object contains an object, serialize it into
* JSON format.
*
* Response transformations:
*
* - If XSRF prefix is detected, strip it (see Security Considerations section below).
* - If JSON response is detected, deserialize it using a JSON parser.
*
* To globally augment or override the default transforms, modify the `$httpProvider.defaults.transformRequest` and
* `$httpProvider.defaults.transformResponse` properties. These properties are by default an
* array of transform functions, which allows you to `push` or `unshift` a new transformation function into the
* transformation chain. You can also decide to completely override any default transformations by assigning your
* transformation functions to these properties directly without the array wrapper.
*
* Similarly, to locally override the request/response transforms, augment the `transformRequest` and/or
* `transformResponse` properties of the configuration object passed into `$http`.
*
*
* # Caching
*
* To enable caching, set the configuration property `cache` to `true`. When the cache is
* enabled, `$http` stores the response from the server in local cache. Next time the
* response is served from the cache without sending a request to the server.
*
* Note that even if the response is served from cache, delivery of the data is asynchronous in
* the same way that real requests are.
*
* If there are multiple GET requests for the same URL that should be cached using the same
* cache, but the cache is not populated yet, only one request to the server will be made and
* the remaining requests will be fulfilled using the response from the first request.
*
* A custom default cache built with $cacheFactory can be provided in $http.defaults.cache.
* To skip it, set configuration property `cache` to `false`.
*
*
* # Interceptors
*
* Before you start creating interceptors, be sure to understand the
* {@link ng.$q $q and deferred/promise APIs}.
*
* For purposes of global error handling, authentication, or any kind of synchronous or
* asynchronous pre-processing of request or postprocessing of responses, it is desirable to be
* able to intercept requests before they are handed to the server and
* responses before they are handed over to the application code that
* initiated these requests. The interceptors leverage the {@link ng.$q
* promise APIs} to fulfill this need for both synchronous and asynchronous pre-processing.
*
* The interceptors are service factories that are registered with the `$httpProvider` by
* adding them to the `$httpProvider.interceptors` array. The factory is called and
* injected with dependencies (if specified) and returns the interceptor.
*
* There are two kinds of interceptors (and two kinds of rejection interceptors):
*
* * `request`: interceptors get called with http `config` object. The function is free to modify
* the `config` or create a new one. The function needs to return the `config` directly or as a
* promise.
* * `requestError`: interceptor gets called when a previous interceptor threw an error or resolved
* with a rejection.
* * `response`: interceptors get called with http `response` object. The function is free to modify
* the `response` or create a new one. The function needs to return the `response` directly or as a
* promise.
* * `responseError`: interceptor gets called when a previous interceptor threw an error or resolved
* with a rejection.
*
*
* <pre>
* // register the interceptor as a service
* $provide.factory('myHttpInterceptor', function($q, dependency1, dependency2) {
* return {
* // optional method
* 'request': function(config) {
* // do something on success
* return config || $q.when(config);
* },
*
* // optional method
* 'requestError': function(rejection) {
* // do something on error
* if (canRecover(rejection)) {
* return responseOrNewPromise
* }
* return $q.reject(rejection);
* },
*
*
*
* // optional method
* 'response': function(response) {
* // do something on success
* return response || $q.when(response);
* },
*
* // optional method
* 'responseError': function(rejection) {
* // do something on error
* if (canRecover(rejection)) {
* return responseOrNewPromise
* }
* return $q.reject(rejection);
* };
* }
* });
*
* $httpProvider.interceptors.push('myHttpInterceptor');
*
*
* // register the interceptor via an anonymous factory
* $httpProvider.interceptors.push(function($q, dependency1, dependency2) {
* return {
* 'request': function(config) {
* // same as above
* },
* 'response': function(response) {
* // same as above
* }
* });
* </pre>
*
* # Response interceptors (DEPRECATED)
*
* Before you start creating interceptors, be sure to understand the
* {@link ng.$q $q and deferred/promise APIs}.
*
* For purposes of global error handling, authentication or any kind of synchronous or
* asynchronous preprocessing of received responses, it is desirable to be able to intercept
* responses for http requests before they are handed over to the application code that
* initiated these requests. The response interceptors leverage the {@link ng.$q
* promise apis} to fulfil this need for both synchronous and asynchronous preprocessing.
*
* The interceptors are service factories that are registered with the $httpProvider by
* adding them to the `$httpProvider.responseInterceptors` array. The factory is called and
* injected with dependencies (if specified) and returns the interceptor — a function that
* takes a {@link ng.$q promise} and returns the original or a new promise.
*
* <pre>
* // register the interceptor as a service
* $provide.factory('myHttpInterceptor', function($q, dependency1, dependency2) {
* return function(promise) {
* return promise.then(function(response) {
* // do something on success
* }, function(response) {
* // do something on error
* if (canRecover(response)) {
* return responseOrNewPromise
* }
* return $q.reject(response);
* });
* }
* });
*
* $httpProvider.responseInterceptors.push('myHttpInterceptor');
*
*
* // register the interceptor via an anonymous factory
* $httpProvider.responseInterceptors.push(function($q, dependency1, dependency2) {
* return function(promise) {
* // same as above
* }
* });
* </pre>
*
*
* # Security Considerations
*
* When designing web applications, consider security threats from:
*
* - {@link http://haacked.com/archive/2008/11/20/anatomy-of-a-subtle-json-vulnerability.aspx
* JSON vulnerability}
* - {@link http://en.wikipedia.org/wiki/Cross-site_request_forgery XSRF}
*
* Both server and the client must cooperate in order to eliminate these threats. Angular comes
* pre-configured with strategies that address these issues, but for this to work backend server
* cooperation is required.
*
* ## JSON Vulnerability Protection
*
* A {@link http://haacked.com/archive/2008/11/20/anatomy-of-a-subtle-json-vulnerability.aspx
* JSON vulnerability} allows third party website to turn your JSON resource URL into
* {@link http://en.wikipedia.org/wiki/JSONP JSONP} request under some conditions. To
* counter this your server can prefix all JSON requests with following string `")]}',\n"`.
* Angular will automatically strip the prefix before processing it as JSON.
*
* For example if your server needs to return:
* <pre>
* ['one','two']
* </pre>
*
* which is vulnerable to attack, your server can return:
* <pre>
* )]}',
* ['one','two']
* </pre>
*
* Angular will strip the prefix, before processing the JSON.
*
*
* ## Cross Site Request Forgery (XSRF) Protection
*
* {@link http://en.wikipedia.org/wiki/Cross-site_request_forgery XSRF} is a technique by which
* an unauthorized site can gain your user's private data. Angular provides a mechanism
* to counter XSRF. When performing XHR requests, the $http service reads a token from a cookie
* (by default, `XSRF-TOKEN`) and sets it as an HTTP header (`X-XSRF-TOKEN`). Since only
* JavaScript that runs on your domain could read the cookie, your server can be assured that
* the XHR came from JavaScript running on your domain. The header will not be set for
* cross-domain requests.
*
* To take advantage of this, your server needs to set a token in a JavaScript readable session
* cookie called `XSRF-TOKEN` on the first HTTP GET request. On subsequent XHR requests the
* server can verify that the cookie matches `X-XSRF-TOKEN` HTTP header, and therefore be sure
* that only JavaScript running on your domain could have sent the request. The token must be
* unique for each user and must be verifiable by the server (to prevent the JavaScript from making
* up its own tokens). We recommend that the token is a digest of your site's authentication
* cookie with a {@link https://en.wikipedia.org/wiki/Salt_(cryptography) salt} for added security.
*
* The name of the headers can be specified using the xsrfHeaderName and xsrfCookieName
* properties of either $httpProvider.defaults, or the per-request config object.
*
*
* @param {object} config Object describing the request to be made and how it should be
* processed. The object has following properties:
*
* - **method** – `{string}` – HTTP method (e.g. 'GET', 'POST', etc)
* - **url** – `{string}` – Absolute or relative URL of the resource that is being requested.
* - **params** – `{Object.<string|Object>}` – Map of strings or objects which will be turned to
* `?key1=value1&key2=value2` after the url. If the value is not a string, it will be JSONified.
* - **data** – `{string|Object}` – Data to be sent as the request message data.
* - **headers** – `{Object}` – Map of strings or functions which return strings representing
* HTTP headers to send to the server. If the return value of a function is null, the header will
* not be sent.
* - **xsrfHeaderName** – `{string}` – Name of HTTP header to populate with the XSRF token.
* - **xsrfCookieName** – `{string}` – Name of cookie containing the XSRF token.
* - **transformRequest** – `{function(data, headersGetter)|Array.<function(data, headersGetter)>}` –
* transform function or an array of such functions. The transform function takes the http
* request body and headers and returns its transformed (typically serialized) version.
* - **transformResponse** – `{function(data, headersGetter)|Array.<function(data, headersGetter)>}` –
* transform function or an array of such functions. The transform function takes the http
* response body and headers and returns its transformed (typically deserialized) version.
* - **cache** – `{boolean|Cache}` – If true, a default $http cache will be used to cache the
* GET request, otherwise if a cache instance built with
* {@link ng.$cacheFactory $cacheFactory}, this cache will be used for
* caching.
* - **timeout** – `{number|Promise}` – timeout in milliseconds, or {@link ng.$q promise}
* that should abort the request when resolved.
* - **withCredentials** - `{boolean}` - whether to to set the `withCredentials` flag on the
* XHR object. See {@link https://developer.mozilla.org/en/http_access_control#section_5
* requests with credentials} for more information.
* - **responseType** - `{string}` - see {@link
* https://developer.mozilla.org/en-US/docs/DOM/XMLHttpRequest#responseType requestType}.
*
* @returns {HttpPromise} Returns a {@link ng.$q promise} object with the
* standard `then` method and two http specific methods: `success` and `error`. The `then`
* method takes two arguments a success and an error callback which will be called with a
* response object. The `success` and `error` methods take a single argument - a function that
* will be called when the request succeeds or fails respectively. The arguments passed into
* these functions are destructured representation of the response object passed into the
* `then` method. The response object has these properties:
*
* - **data** – `{string|Object}` – The response body transformed with the transform functions.
* - **status** – `{number}` – HTTP status code of the response.
* - **headers** – `{function([headerName])}` – Header getter function.
* - **config** – `{Object}` – The configuration object that was used to generate the request.
*
* @property {Array.<Object>} pendingRequests Array of config objects for currently pending
* requests. This is primarily meant to be used for debugging purposes.
*
*
* @example
<example>
<file name="index.html">
<div ng-controller="FetchCtrl">
<select ng-model="method">
<option>GET</option>
<option>JSONP</option>
</select>
<input type="text" ng-model="url" size="80"/>
<button ng-click="fetch()">fetch</button><br>
<button ng-click="updateModel('GET', 'http-hello.html')">Sample GET</button>
<button ng-click="updateModel('JSONP', 'http://angularjs.org/greet.php?callback=JSON_CALLBACK&name=Super%20Hero')">Sample JSONP</button>
<button ng-click="updateModel('JSONP', 'http://angularjs.org/doesntexist&callback=JSON_CALLBACK')">Invalid JSONP</button>
<pre>http status code: {{status}}</pre>
<pre>http response data: {{data}}</pre>
</div>
</file>
<file name="script.js">
function FetchCtrl($scope, $http, $templateCache) {
$scope.method = 'GET';
$scope.url = 'http-hello.html';
$scope.fetch = function() {
$scope.code = null;
$scope.response = null;
$http({method: $scope.method, url: $scope.url, cache: $templateCache}).
success(function(data, status) {
$scope.status = status;
$scope.data = data;
}).
error(function(data, status) {
$scope.data = data || "Request failed";
$scope.status = status;
});
};
$scope.updateModel = function(method, url) {
$scope.method = method;
$scope.url = url;
};
}
</file>
<file name="http-hello.html">
Hello, $http!
</file>
<file name="scenario.js">
it('should make an xhr GET request', function() {
element(':button:contains("Sample GET")').click();
element(':button:contains("fetch")').click();
expect(binding('status')).toBe('200');
expect(binding('data')).toMatch(/Hello, \$http!/);
});
it('should make a JSONP request to angularjs.org', function() {
element(':button:contains("Sample JSONP")').click();
element(':button:contains("fetch")').click();
expect(binding('status')).toBe('200');
expect(binding('data')).toMatch(/Super Hero!/);
});
it('should make JSONP request to invalid URL and invoke the error handler',
function() {
element(':button:contains("Invalid JSONP")').click();
element(':button:contains("fetch")').click();
expect(binding('status')).toBe('0');
expect(binding('data')).toBe('Request failed');
});
</file>
</example>
*/
function $http(requestConfig) {
var config = {
transformRequest: defaults.transformRequest,
transformResponse: defaults.transformResponse
};
var headers = mergeHeaders(requestConfig);
extend(config, requestConfig);
config.headers = headers;
config.method = uppercase(config.method);
var xsrfValue = $$urlUtils.isSameOrigin(config.url)
? $browser.cookies()[config.xsrfCookieName || defaults.xsrfCookieName]
: undefined;
if (xsrfValue) {
headers[(config.xsrfHeaderName || defaults.xsrfHeaderName)] = xsrfValue;
}
var serverRequest = function(config) {
headers = config.headers;
var reqData = transformData(config.data, headersGetter(headers), config.transformRequest);
// strip content-type if data is undefined
if (isUndefined(config.data)) {
forEach(headers, function(value, header) {
if (lowercase(header) === 'content-type') {
delete headers[header];
}
});
}
if (isUndefined(config.withCredentials) && !isUndefined(defaults.withCredentials)) {
config.withCredentials = defaults.withCredentials;
}
// send request
return sendReq(config, reqData, headers).then(transformResponse, transformResponse);
};
var chain = [serverRequest, undefined];
var promise = $q.when(config);
// apply interceptors
forEach(reversedInterceptors, function(interceptor) {
if (interceptor.request || interceptor.requestError) {
chain.unshift(interceptor.request, interceptor.requestError);
}
if (interceptor.response || interceptor.responseError) {
chain.push(interceptor.response, interceptor.responseError);
}
});
while(chain.length) {
var thenFn = chain.shift();
var rejectFn = chain.shift();
promise = promise.then(thenFn, rejectFn);
}
promise.success = function(fn) {
promise.then(function(response) {
fn(response.data, response.status, response.headers, config);
});
return promise;
};
promise.error = function(fn) {
promise.then(null, function(response) {
fn(response.data, response.status, response.headers, config);
});
return promise;
};
return promise;
function transformResponse(response) {
// make a copy since the response must be cacheable
var resp = extend({}, response, {
data: transformData(response.data, response.headers, config.transformResponse)
});
return (isSuccess(response.status))
? resp
: $q.reject(resp);
}
function mergeHeaders(config) {
var defHeaders = defaults.headers,
reqHeaders = extend({}, config.headers),
defHeaderName, lowercaseDefHeaderName, reqHeaderName;
defHeaders = extend({}, defHeaders.common, defHeaders[lowercase(config.method)]);
// execute if header value is function
execHeaders(defHeaders);
execHeaders(reqHeaders);
// using for-in instead of forEach to avoid unecessary iteration after header has been found
defaultHeadersIteration:
for (defHeaderName in defHeaders) {
lowercaseDefHeaderName = lowercase(defHeaderName);
for (reqHeaderName in reqHeaders) {
if (lowercase(reqHeaderName) === lowercaseDefHeaderName) {
continue defaultHeadersIteration;
}
}
reqHeaders[defHeaderName] = defHeaders[defHeaderName];
}
return reqHeaders;
function execHeaders(headers) {
var headerContent;
forEach(headers, function(headerFn, header) {
if (isFunction(headerFn)) {
headerContent = headerFn();
if (headerContent != null) {
headers[header] = headerContent;
} else {
delete headers[header];
}
}
});
}
}
}
$http.pendingRequests = [];
/**
* @ngdoc method
* @name ng.$http#get
* @methodOf ng.$http
*
* @description
* Shortcut method to perform `GET` request.
*
* @param {string} url Relative or absolute URL specifying the destination of the request
* @param {Object=} config Optional configuration object
* @returns {HttpPromise} Future object
*/
/**
* @ngdoc method
* @name ng.$http#delete
* @methodOf ng.$http
*
* @description
* Shortcut method to perform `DELETE` request.
*
* @param {string} url Relative or absolute URL specifying the destination of the request
* @param {Object=} config Optional configuration object
* @returns {HttpPromise} Future object
*/
/**
* @ngdoc method
* @name ng.$http#head
* @methodOf ng.$http
*
* @description
* Shortcut method to perform `HEAD` request.
*
* @param {string} url Relative or absolute URL specifying the destination of the request
* @param {Object=} config Optional configuration object
* @returns {HttpPromise} Future object
*/
/**
* @ngdoc method
* @name ng.$http#jsonp
* @methodOf ng.$http
*
* @description
* Shortcut method to perform `JSONP` request.
*
* @param {string} url Relative or absolute URL specifying the destination of the request.
* Should contain `JSON_CALLBACK` string.
* @param {Object=} config Optional configuration object
* @returns {HttpPromise} Future object
*/
createShortMethods('get', 'delete', 'head', 'jsonp');
/**
* @ngdoc method
* @name ng.$http#post
* @methodOf ng.$http
*
* @description
* Shortcut method to perform `POST` request.
*
* @param {string} url Relative or absolute URL specifying the destination of the request
* @param {*} data Request content
* @param {Object=} config Optional configuration object
* @returns {HttpPromise} Future object
*/
/**
* @ngdoc method
* @name ng.$http#put
* @methodOf ng.$http
*
* @description
* Shortcut method to perform `PUT` request.
*
* @param {string} url Relative or absolute URL specifying the destination of the request
* @param {*} data Request content
* @param {Object=} config Optional configuration object
* @returns {HttpPromise} Future object
*/
createShortMethodsWithData('post', 'put');
/**
* @ngdoc property
* @name ng.$http#defaults
* @propertyOf ng.$http
*
* @description
* Runtime equivalent of the `$httpProvider.defaults` property. Allows configuration of
* default headers, withCredentials as well as request and response transformations.
*
* See "Setting HTTP Headers" and "Transforming Requests and Responses" sections above.
*/
$http.defaults = defaults;
return $http;
function createShortMethods(names) {
forEach(arguments, function(name) {
$http[name] = function(url, config) {
return $http(extend(config || {}, {
method: name,
url: url
}));
};
});
}
function createShortMethodsWithData(name) {
forEach(arguments, function(name) {
$http[name] = function(url, data, config) {
return $http(extend(config || {}, {
method: name,
url: url,
data: data
}));
};
});
}
/**
* Makes the request.
*
* !!! ACCESSES CLOSURE VARS:
* $httpBackend, defaults, $log, $rootScope, defaultCache, $http.pendingRequests
*/
function sendReq(config, reqData, reqHeaders) {
var deferred = $q.defer(),
promise = deferred.promise,
cache,
cachedResp,
url = buildUrl(config.url, config.params);
$http.pendingRequests.push(config);
promise.then(removePendingReq, removePendingReq);
if ((config.cache || defaults.cache) && config.cache !== false && config.method == 'GET') {
cache = isObject(config.cache) ? config.cache
: isObject(defaults.cache) ? defaults.cache
: defaultCache;
}
if (cache) {
cachedResp = cache.get(url);
if (cachedResp) {
if (cachedResp.then) {
// cached request has already been sent, but there is no response yet
cachedResp.then(removePendingReq, removePendingReq);
return cachedResp;
} else {
// serving from cache
if (isArray(cachedResp)) {
resolvePromise(cachedResp[1], cachedResp[0], copy(cachedResp[2]));
} else {
resolvePromise(cachedResp, 200, {});
}
}
} else {
// put the promise for the non-transformed response into cache as a placeholder
cache.put(url, promise);
}
}
// if we won't have the response in cache, send the request to the backend
if (!cachedResp) {
$httpBackend(config.method, url, reqData, done, reqHeaders, config.timeout,
config.withCredentials, config.responseType);
}
return promise;
/**
* Callback registered to $httpBackend():
* - caches the response if desired
* - resolves the raw $http promise
* - calls $apply
*/
function done(status, response, headersString) {
if (cache) {
if (isSuccess(status)) {
cache.put(url, [status, response, parseHeaders(headersString)]);
} else {
// remove promise from the cache
cache.remove(url);
}
}
resolvePromise(response, status, headersString);
if (!$rootScope.$$phase) $rootScope.$apply();
}
/**
* Resolves the raw $http promise.
*/
function resolvePromise(response, status, headers) {
// normalize internal statuses to 0
status = Math.max(status, 0);
(isSuccess(status) ? deferred.resolve : deferred.reject)({
data: response,
status: status,
headers: headersGetter(headers),
config: config
});
}
function removePendingReq() {
var idx = indexOf($http.pendingRequests, config);
if (idx !== -1) $http.pendingRequests.splice(idx, 1);
}
}
function buildUrl(url, params) {
if (!params) return url;
var parts = [];
forEachSorted(params, function(value, key) {
if (value == null || value == undefined) return;
if (!isArray(value)) value = [value];
forEach(value, function(v) {
if (isObject(v)) {
v = toJson(v);
}
parts.push(encodeUriQuery(key) + '=' +
encodeUriQuery(v));
});
});
return url + ((url.indexOf('?') == -1) ? '?' : '&') + parts.join('&');
}
}];
}
var XHR = window.XMLHttpRequest || function() {
try { return new ActiveXObject("Msxml2.XMLHTTP.6.0"); } catch (e1) {}
try { return new ActiveXObject("Msxml2.XMLHTTP.3.0"); } catch (e2) {}
try { return new ActiveXObject("Msxml2.XMLHTTP"); } catch (e3) {}
throw minErr('$httpBackend')('noxhr', "This browser does not support XMLHttpRequest.");
};
/**
* @ngdoc object
* @name ng.$httpBackend
* @requires $browser
* @requires $window
* @requires $document
*
* @description
* HTTP backend used by the {@link ng.$http service} that delegates to
* XMLHttpRequest object or JSONP and deals with browser incompatibilities.
*
* You should never need to use this service directly, instead use the higher-level abstractions:
* {@link ng.$http $http} or {@link ngResource.$resource $resource}.
*
* During testing this implementation is swapped with {@link ngMock.$httpBackend mock
* $httpBackend} which can be trained with responses.
*/
function $HttpBackendProvider() {
this.$get = ['$browser', '$window', '$document', function($browser, $window, $document) {
return createHttpBackend($browser, XHR, $browser.defer, $window.angular.callbacks,
$document[0], $window.location.protocol.replace(':', ''));
}];
}
function createHttpBackend($browser, XHR, $browserDefer, callbacks, rawDocument, locationProtocol) {
// TODO(vojta): fix the signature
return function(method, url, post, callback, headers, timeout, withCredentials, responseType) {
var status;
$browser.$$incOutstandingRequestCount();
url = url || $browser.url();
if (lowercase(method) == 'jsonp') {
var callbackId = '_' + (callbacks.counter++).toString(36);
callbacks[callbackId] = function(data) {
callbacks[callbackId].data = data;
};
var jsonpDone = jsonpReq(url.replace('JSON_CALLBACK', 'angular.callbacks.' + callbackId),
function() {
if (callbacks[callbackId].data) {
completeRequest(callback, 200, callbacks[callbackId].data);
} else {
completeRequest(callback, status || -2);
}
delete callbacks[callbackId];
});
} else {
var xhr = new XHR();
xhr.open(method, url, true);
forEach(headers, function(value, key) {
if (value) xhr.setRequestHeader(key, value);
});
// In IE6 and 7, this might be called synchronously when xhr.send below is called and the
// response is in the cache. the promise api will ensure that to the app code the api is
// always async
xhr.onreadystatechange = function() {
if (xhr.readyState == 4) {
var responseHeaders = xhr.getAllResponseHeaders();
// TODO(vojta): remove once Firefox 21 gets released.
// begin: workaround to overcome Firefox CORS http response headers bug
// https://bugzilla.mozilla.org/show_bug.cgi?id=608735
// Firefox already patched in nightly. Should land in Firefox 21.
// CORS "simple response headers" http://www.w3.org/TR/cors/
var value,
simpleHeaders = ["Cache-Control", "Content-Language", "Content-Type",
"Expires", "Last-Modified", "Pragma"];
if (!responseHeaders) {
responseHeaders = "";
forEach(simpleHeaders, function (header) {
var value = xhr.getResponseHeader(header);
if (value) {
responseHeaders += header + ": " + value + "\n";
}
});
}
// end of the workaround.
// responseText is the old-school way of retrieving response (supported by IE8 & 9)
// response and responseType properties were introduced in XHR Level2 spec (supported by IE10)
completeRequest(callback,
status || xhr.status,
(xhr.responseType ? xhr.response : xhr.responseText),
responseHeaders);
}
};
if (withCredentials) {
xhr.withCredentials = true;
}
if (responseType) {
xhr.responseType = responseType;
}
xhr.send(post || '');
}
if (timeout > 0) {
var timeoutId = $browserDefer(timeoutRequest, timeout);
} else if (timeout && timeout.then) {
timeout.then(timeoutRequest);
}
function timeoutRequest() {
status = -1;
jsonpDone && jsonpDone();
xhr && xhr.abort();
}
function completeRequest(callback, status, response, headersString) {
// URL_MATCH is defined in src/service/location.js
var protocol = (url.match(SERVER_MATCH) || ['', locationProtocol])[1];
// cancel timeout and subsequent timeout promise resolution
timeoutId && $browserDefer.cancel(timeoutId);
jsonpDone = xhr = null;
// fix status code for file protocol (it's always 0)
status = (protocol == 'file') ? (response ? 200 : 404) : status;
// normalize IE bug (http://bugs.jquery.com/ticket/1450)
status = status == 1223 ? 204 : status;
callback(status, response, headersString);
$browser.$$completeOutstandingRequest(noop);
}
};
function jsonpReq(url, done) {
// we can't use jQuery/jqLite here because jQuery does crazy shit with script elements, e.g.:
// - fetches local scripts via XHR and evals them
// - adds and immediately removes script elements from the document
var script = rawDocument.createElement('script'),
doneWrapper = function() {
rawDocument.body.removeChild(script);
if (done) done();
};
script.type = 'text/javascript';
script.src = url;
if (msie) {
script.onreadystatechange = function() {
if (/loaded|complete/.test(script.readyState)) doneWrapper();
};
} else {
script.onload = script.onerror = doneWrapper;
}
rawDocument.body.appendChild(script);
return doneWrapper;
}
}
var $interpolateMinErr = minErr('$interpolate');
/**
* @ngdoc object
* @name ng.$interpolateProvider
* @function
*
* @description
*
* Used for configuring the interpolation markup. Defaults to `{{` and `}}`.
*
* @example
<doc:example>
<doc:source>
<script>
var myApp = angular.module('App', [], function($interpolateProvider) {
$interpolateProvider.startSymbol('//');
$interpolateProvider.endSymbol('//');
});
function Controller($scope) {
$scope.label = "Interpolation Provider Sample";
}
</script>
<div ng-app="App" ng-controller="Controller">
//label//
</div>
</doc:source>
</doc:example>
*/
function $InterpolateProvider() {
var startSymbol = '{{';
var endSymbol = '}}';
/**
* @ngdoc method
* @name ng.$interpolateProvider#startSymbol
* @methodOf ng.$interpolateProvider
* @description
* Symbol to denote start of expression in the interpolated string. Defaults to `{{`.
*
* @param {string=} value new value to set the starting symbol to.
* @returns {string|self} Returns the symbol when used as getter and self if used as setter.
*/
this.startSymbol = function(value){
if (value) {
startSymbol = value;
return this;
} else {
return startSymbol;
}
};
/**
* @ngdoc method
* @name ng.$interpolateProvider#endSymbol
* @methodOf ng.$interpolateProvider
* @description
* Symbol to denote the end of expression in the interpolated string. Defaults to `}}`.
*
* @param {string=} value new value to set the ending symbol to.
* @returns {string|self} Returns the symbol when used as getter and self if used as setter.
*/
this.endSymbol = function(value){
if (value) {
endSymbol = value;
return this;
} else {
return endSymbol;
}
};
this.$get = ['$parse', '$exceptionHandler', '$sce', function($parse, $exceptionHandler, $sce) {
var startSymbolLength = startSymbol.length,
endSymbolLength = endSymbol.length;
/**
* @ngdoc function
* @name ng.$interpolate
* @function
*
* @requires $parse
* @requires $sce
*
* @description
*
* Compiles a string with markup into an interpolation function. This service is used by the
* HTML {@link ng.$compile $compile} service for data binding. See
* {@link ng.$interpolateProvider $interpolateProvider} for configuring the
* interpolation markup.
*
*
<pre>
var $interpolate = ...; // injected
var exp = $interpolate('Hello {{name}}!');
expect(exp({name:'Angular'}).toEqual('Hello Angular!');
</pre>
*
*
* @param {string} text The text with markup to interpolate.
* @param {boolean=} mustHaveExpression if set to true then the interpolation string must have
* embedded expression in order to return an interpolation function. Strings with no
* embedded expression will return null for the interpolation function.
* @param {string=} trustedContext when provided, the returned function passes the interpolated
* result through {@link ng.$sce#getTrusted $sce.getTrusted(interpolatedResult,
* trustedContext)} before returning it. Refer to the {@link ng.$sce $sce} service that
* provides Strict Contextual Escaping for details.
* @returns {function(context)} an interpolation function which is used to compute the interpolated
* string. The function has these parameters:
*
* * `context`: an object against which any expressions embedded in the strings are evaluated
* against.
*
*/
function $interpolate(text, mustHaveExpression, trustedContext) {
var startIndex,
endIndex,
index = 0,
parts = [],
length = text.length,
hasInterpolation = false,
fn,
exp,
concat = [];
while(index < length) {
if ( ((startIndex = text.indexOf(startSymbol, index)) != -1) &&
((endIndex = text.indexOf(endSymbol, startIndex + startSymbolLength)) != -1) ) {
(index != startIndex) && parts.push(text.substring(index, startIndex));
parts.push(fn = $parse(exp = text.substring(startIndex + startSymbolLength, endIndex)));
fn.exp = exp;
index = endIndex + endSymbolLength;
hasInterpolation = true;
} else {
// we did not find anything, so we have to add the remainder to the parts array
(index != length) && parts.push(text.substring(index));
index = length;
}
}
if (!(length = parts.length)) {
// we added, nothing, must have been an empty string.
parts.push('');
length = 1;
}
// Concatenating expressions makes it hard to reason about whether some combination of concatenated
// values are unsafe to use and could easily lead to XSS. By requiring that a single
// expression be used for iframe[src], object[src], etc., we ensure that the value that's used
// is assigned or constructed by some JS code somewhere that is more testable or make it
// obvious that you bound the value to some user controlled value. This helps reduce the load
// when auditing for XSS issues.
if (trustedContext && parts.length > 1) {
throw $interpolateMinErr('noconcat',
"Error while interpolating: {0}\nStrict Contextual Escaping disallows " +
"interpolations that concatenate multiple expressions when a trusted value is " +
"required. See http://docs.angularjs.org/api/ng.$sce", text);
}
if (!mustHaveExpression || hasInterpolation) {
concat.length = length;
fn = function(context) {
try {
for(var i = 0, ii = length, part; i<ii; i++) {
if (typeof (part = parts[i]) == 'function') {
part = part(context);
if (trustedContext) {
part = $sce.getTrusted(trustedContext, part);
} else {
part = $sce.valueOf(part);
}
if (part == null || part == undefined) {
part = '';
} else if (typeof part != 'string') {
part = toJson(part);
}
}
concat[i] = part;
}
return concat.join('');
}
catch(err) {
var newErr = $interpolateMinErr('interr', "Can't interpolate: {0}\n{1}", text, err.toString());
$exceptionHandler(newErr);
}
};
fn.exp = text;
fn.parts = parts;
return fn;
}
}
/**
* @ngdoc method
* @name ng.$interpolate#startSymbol
* @methodOf ng.$interpolate
* @description
* Symbol to denote the start of expression in the interpolated string. Defaults to `{{`.
*
* Use {@link ng.$interpolateProvider#startSymbol $interpolateProvider#startSymbol} to change
* the symbol.
*
* @returns {string} start symbol.
*/
$interpolate.startSymbol = function() {
return startSymbol;
}
/**
* @ngdoc method
* @name ng.$interpolate#endSymbol
* @methodOf ng.$interpolate
* @description
* Symbol to denote the end of expression in the interpolated string. Defaults to `}}`.
*
* Use {@link ng.$interpolateProvider#endSymbol $interpolateProvider#endSymbol} to change
* the symbol.
*
* @returns {string} start symbol.
*/
$interpolate.endSymbol = function() {
return endSymbol;
}
return $interpolate;
}];
}
/**
* @ngdoc object
* @name ng.$locale
*
* @description
* $locale service provides localization rules for various Angular components. As of right now the
* only public api is:
*
* * `id` – `{string}` – locale id formatted as `languageId-countryId` (e.g. `en-us`)
*/
function $LocaleProvider(){
this.$get = function() {
return {
id: 'en-us',
NUMBER_FORMATS: {
DECIMAL_SEP: '.',
GROUP_SEP: ',',
PATTERNS: [
{ // Decimal Pattern
minInt: 1,
minFrac: 0,
maxFrac: 3,
posPre: '',
posSuf: '',
negPre: '-',
negSuf: '',
gSize: 3,
lgSize: 3
},{ //Currency Pattern
minInt: 1,
minFrac: 2,
maxFrac: 2,
posPre: '\u00A4',
posSuf: '',
negPre: '(\u00A4',
negSuf: ')',
gSize: 3,
lgSize: 3
}
],
CURRENCY_SYM: '$'
},
DATETIME_FORMATS: {
MONTH: 'January,February,March,April,May,June,July,August,September,October,November,December'
.split(','),
SHORTMONTH: 'Jan,Feb,Mar,Apr,May,Jun,Jul,Aug,Sep,Oct,Nov,Dec'.split(','),
DAY: 'Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday'.split(','),
SHORTDAY: 'Sun,Mon,Tue,Wed,Thu,Fri,Sat'.split(','),
AMPMS: ['AM','PM'],
medium: 'MMM d, y h:mm:ss a',
short: 'M/d/yy h:mm a',
fullDate: 'EEEE, MMMM d, y',
longDate: 'MMMM d, y',
mediumDate: 'MMM d, y',
shortDate: 'M/d/yy',
mediumTime: 'h:mm:ss a',
shortTime: 'h:mm a'
},
pluralCat: function(num) {
if (num === 1) {
return 'one';
}
return 'other';
}
};
};
}
var SERVER_MATCH = /^([^:]+):\/\/(\w+:{0,1}\w*@)?(\{?[\w\.-]*\}?)(:([0-9]+))?(\/[^\?#]*)?(\?([^#]*))?(#(.*))?$/,
PATH_MATCH = /^([^\?#]*)(\?([^#]*))?(#(.*))?$/,
DEFAULT_PORTS = {'http': 80, 'https': 443, 'ftp': 21};
var $locationMinErr = minErr('$location');
/**
* Encode path using encodeUriSegment, ignoring forward slashes
*
* @param {string} path Path to encode
* @returns {string}
*/
function encodePath(path) {
var segments = path.split('/'),
i = segments.length;
while (i--) {
segments[i] = encodeUriSegment(segments[i]);
}
return segments.join('/');
}
function matchUrl(url, obj) {
var match = SERVER_MATCH.exec(url);
obj.$$protocol = match[1];
obj.$$host = match[3];
obj.$$port = int(match[5]) || DEFAULT_PORTS[match[1]] || null;
}
function matchAppUrl(url, obj) {
var match = PATH_MATCH.exec(url);
obj.$$path = decodeURIComponent(match[1]);
obj.$$search = parseKeyValue(match[3]);
obj.$$hash = decodeURIComponent(match[5] || '');
// make sure path starts with '/';
if (obj.$$path && obj.$$path.charAt(0) != '/') obj.$$path = '/' + obj.$$path;
}
function composeProtocolHostPort(protocol, host, port) {
return protocol + '://' + host + (port == DEFAULT_PORTS[protocol] ? '' : ':' + port);
}
/**
*
* @param {string} begin
* @param {string} whole
* @param {string} otherwise
* @returns {string} returns text from whole after begin or otherwise if it does not begin with expected string.
*/
function beginsWith(begin, whole, otherwise) {
return whole.indexOf(begin) == 0 ? whole.substr(begin.length) : otherwise;
}
function stripHash(url) {
var index = url.indexOf('#');
return index == -1 ? url : url.substr(0, index);
}
function stripFile(url) {
return url.substr(0, stripHash(url).lastIndexOf('/') + 1);
}
/* return the server only (scheme://host:port) */
function serverBase(url) {
return url.substring(0, url.indexOf('/', url.indexOf('//') + 2));
}
/**
* LocationHtml5Url represents an url
* This object is exposed as $location service when HTML5 mode is enabled and supported
*
* @constructor
* @param {string} appBase application base URL
* @param {string} basePrefix url path prefix
*/
function LocationHtml5Url(appBase, basePrefix) {
this.$$html5 = true;
basePrefix = basePrefix || '';
var appBaseNoFile = stripFile(appBase);
/**
* Parse given html5 (regular) url string into properties
* @param {string} newAbsoluteUrl HTML5 url
* @private
*/
this.$$parse = function(url) {
var parsed = {}
matchUrl(url, parsed);
var pathUrl = beginsWith(appBaseNoFile, url);
if (!isString(pathUrl)) {
throw $locationMinErr('ipthprfx', 'Invalid url "{0}", missing path prefix "{1}".', url, appBaseNoFile);
}
matchAppUrl(pathUrl, parsed);
extend(this, parsed);
if (!this.$$path) {
this.$$path = '/';
}
this.$$compose();
};
/**
* Compose url and update `absUrl` property
* @private
*/
this.$$compose = function() {
var search = toKeyValue(this.$$search),
hash = this.$$hash ? '#' + encodeUriSegment(this.$$hash) : '';
this.$$url = encodePath(this.$$path) + (search ? '?' + search : '') + hash;
this.$$absUrl = appBaseNoFile + this.$$url.substr(1); // first char is always '/'
};
this.$$rewrite = function(url) {
var appUrl, prevAppUrl;
if ( (appUrl = beginsWith(appBase, url)) !== undefined ) {
prevAppUrl = appUrl;
if ( (appUrl = beginsWith(basePrefix, appUrl)) !== undefined ) {
return appBaseNoFile + (beginsWith('/', appUrl) || appUrl);
} else {
return appBase + prevAppUrl;
}
} else if ( (appUrl = beginsWith(appBaseNoFile, url)) !== undefined ) {
return appBaseNoFile + appUrl;
} else if (appBaseNoFile == url + '/') {
return appBaseNoFile;
}
}
}
/**
* LocationHashbangUrl represents url
* This object is exposed as $location service when developer doesn't opt into html5 mode.
* It also serves as the base class for html5 mode fallback on legacy browsers.
*
* @constructor
* @param {string} appBase application base URL
* @param {string} hashPrefix hashbang prefix
*/
function LocationHashbangUrl(appBase, hashPrefix) {
var appBaseNoFile = stripFile(appBase);
matchUrl(appBase, this);
/**
* Parse given hashbang url into properties
* @param {string} url Hashbang url
* @private
*/
this.$$parse = function(url) {
var withoutBaseUrl = beginsWith(appBase, url) || beginsWith(appBaseNoFile, url);
var withoutHashUrl = withoutBaseUrl.charAt(0) == '#'
? beginsWith(hashPrefix, withoutBaseUrl)
: (this.$$html5)
? withoutBaseUrl
: '';
if (!isString(withoutHashUrl)) {
throw $locationMinErr('ihshprfx', 'Invalid url "{0}", missing hash prefix "{1}".', url, hashPrefix);
}
matchAppUrl(withoutHashUrl, this);
this.$$compose();
};
/**
* Compose hashbang url and update `absUrl` property
* @private
*/
this.$$compose = function() {
var search = toKeyValue(this.$$search),
hash = this.$$hash ? '#' + encodeUriSegment(this.$$hash) : '';
this.$$url = encodePath(this.$$path) + (search ? '?' + search : '') + hash;
this.$$absUrl = appBase + (this.$$url ? hashPrefix + this.$$url : '');
};
this.$$rewrite = function(url) {
if(stripHash(appBase) == stripHash(url)) {
return url;
}
}
}
/**
* LocationHashbangUrl represents url
* This object is exposed as $location service when html5 history api is enabled but the browser
* does not support it.
*
* @constructor
* @param {string} appBase application base URL
* @param {string} hashPrefix hashbang prefix
*/
function LocationHashbangInHtml5Url(appBase, hashPrefix) {
this.$$html5 = true;
LocationHashbangUrl.apply(this, arguments);
var appBaseNoFile = stripFile(appBase);
this.$$rewrite = function(url) {
var appUrl;
if ( appBase == stripHash(url) ) {
return url;
} else if ( (appUrl = beginsWith(appBaseNoFile, url)) ) {
return appBase + hashPrefix + appUrl;
} else if ( appBaseNoFile === url + '/') {
return appBaseNoFile;
}
}
}
LocationHashbangInHtml5Url.prototype =
LocationHashbangUrl.prototype =
LocationHtml5Url.prototype = {
/**
* Are we in html5 mode?
* @private
*/
$$html5: false,
/**
* Has any change been replacing ?
* @private
*/
$$replace: false,
/**
* @ngdoc method
* @name ng.$location#absUrl
* @methodOf ng.$location
*
* @description
* This method is getter only.
*
* Return full url representation with all segments encoded according to rules specified in
* {@link http://www.ietf.org/rfc/rfc3986.txt RFC 3986}.
*
* @return {string} full url
*/
absUrl: locationGetter('$$absUrl'),
/**
* @ngdoc method
* @name ng.$location#url
* @methodOf ng.$location
*
* @description
* This method is getter / setter.
*
* Return url (e.g. `/path?a=b#hash`) when called without any parameter.
*
* Change path, search and hash, when called with parameter and return `$location`.
*
* @param {string=} url New url without base prefix (e.g. `/path?a=b#hash`)
* @param {string=} replace The path that will be changed
* @return {string} url
*/
url: function(url, replace) {
if (isUndefined(url))
return this.$$url;
var match = PATH_MATCH.exec(url);
if (match[1]) this.path(decodeURIComponent(match[1]));
if (match[2] || match[1]) this.search(match[3] || '');
this.hash(match[5] || '', replace);
return this;
},
/**
* @ngdoc method
* @name ng.$location#protocol
* @methodOf ng.$location
*
* @description
* This method is getter only.
*
* Return protocol of current url.
*
* @return {string} protocol of current url
*/
protocol: locationGetter('$$protocol'),
/**
* @ngdoc method
* @name ng.$location#host
* @methodOf ng.$location
*
* @description
* This method is getter only.
*
* Return host of current url.
*
* @return {string} host of current url.
*/
host: locationGetter('$$host'),
/**
* @ngdoc method
* @name ng.$location#port
* @methodOf ng.$location
*
* @description
* This method is getter only.
*
* Return port of current url.
*
* @return {Number} port
*/
port: locationGetter('$$port'),
/**
* @ngdoc method
* @name ng.$location#path
* @methodOf ng.$location
*
* @description
* This method is getter / setter.
*
* Return path of current url when called without any parameter.
*
* Change path when called with parameter and return `$location`.
*
* Note: Path should always begin with forward slash (/), this method will add the forward slash
* if it is missing.
*
* @param {string=} path New path
* @return {string} path
*/
path: locationGetterSetter('$$path', function(path) {
return path.charAt(0) == '/' ? path : '/' + path;
}),
/**
* @ngdoc method
* @name ng.$location#search
* @methodOf ng.$location
*
* @description
* This method is getter / setter.
*
* Return search part (as object) of current url when called without any parameter.
*
* Change search part when called with parameter and return `$location`.
*
* @param {string|Object.<string>|Object.<Array.<string>>} search New search params - string or hash object. Hash object
* may contain an array of values, which will be decoded as duplicates in the url.
* @param {string=} paramValue If `search` is a string, then `paramValue` will override only a
* single search parameter. If the value is `null`, the parameter will be deleted.
*
* @return {string} search
*/
search: function(search, paramValue) {
switch (arguments.length) {
case 0:
return this.$$search;
case 1:
if (isString(search)) {
this.$$search = parseKeyValue(search);
} else if (isObject(search)) {
this.$$search = search;
} else {
throw $locationMinErr('isrcharg', 'The first argument of the `$location#search()` call must be a string or an object.');
}
break;
default:
if (paramValue == undefined || paramValue == null) {
delete this.$$search[search];
} else {
this.$$search[search] = paramValue;
}
}
this.$$compose();
return this;
},
/**
* @ngdoc method
* @name ng.$location#hash
* @methodOf ng.$location
*
* @description
* This method is getter / setter.
*
* Return hash fragment when called without any parameter.
*
* Change hash fragment when called with parameter and return `$location`.
*
* @param {string=} hash New hash fragment
* @return {string} hash
*/
hash: locationGetterSetter('$$hash', identity),
/**
* @ngdoc method
* @name ng.$location#replace
* @methodOf ng.$location
*
* @description
* If called, all changes to $location during current `$digest` will be replacing current history
* record, instead of adding new one.
*/
replace: function() {
this.$$replace = true;
return this;
}
};
function locationGetter(property) {
return function() {
return this[property];
};
}
function locationGetterSetter(property, preprocess) {
return function(value) {
if (isUndefined(value))
return this[property];
this[property] = preprocess(value);
this.$$compose();
return this;
};
}
/**
* @ngdoc object
* @name ng.$location
*
* @requires $browser
* @requires $sniffer
* @requires $rootElement
*
* @description
* The $location service parses the URL in the browser address bar (based on the
* {@link https://developer.mozilla.org/en/window.location window.location}) and makes the URL
* available to your application. Changes to the URL in the address bar are reflected into
* $location service and changes to $location are reflected into the browser address bar.
*
* **The $location service:**
*
* - Exposes the current URL in the browser address bar, so you can
* - Watch and observe the URL.
* - Change the URL.
* - Synchronizes the URL with the browser when the user
* - Changes the address bar.
* - Clicks the back or forward button (or clicks a History link).
* - Clicks on a link.
* - Represents the URL object as a set of methods (protocol, host, port, path, search, hash).
*
* For more information see {@link guide/dev_guide.services.$location Developer Guide: Angular
* Services: Using $location}
*/
/**
* @ngdoc object
* @name ng.$locationProvider
* @description
* Use the `$locationProvider` to configure how the application deep linking paths are stored.
*/
function $LocationProvider(){
var hashPrefix = '',
html5Mode = false;
/**
* @ngdoc property
* @name ng.$locationProvider#hashPrefix
* @methodOf ng.$locationProvider
* @description
* @param {string=} prefix Prefix for hash part (containing path and search)
* @returns {*} current value if used as getter or itself (chaining) if used as setter
*/
this.hashPrefix = function(prefix) {
if (isDefined(prefix)) {
hashPrefix = prefix;
return this;
} else {
return hashPrefix;
}
};
/**
* @ngdoc property
* @name ng.$locationProvider#html5Mode
* @methodOf ng.$locationProvider
* @description
* @param {string=} mode Use HTML5 strategy if available.
* @returns {*} current value if used as getter or itself (chaining) if used as setter
*/
this.html5Mode = function(mode) {
if (isDefined(mode)) {
html5Mode = mode;
return this;
} else {
return html5Mode;
}
};
this.$get = ['$rootScope', '$browser', '$sniffer', '$rootElement',
function( $rootScope, $browser, $sniffer, $rootElement) {
var $location,
LocationMode,
baseHref = $browser.baseHref(), // if base[href] is undefined, it defaults to ''
initialUrl = $browser.url(),
appBase;
if (html5Mode) {
appBase = serverBase(initialUrl) + (baseHref || '/');
LocationMode = $sniffer.history ? LocationHtml5Url : LocationHashbangInHtml5Url;
} else {
appBase = stripHash(initialUrl);
LocationMode = LocationHashbangUrl;
}
$location = new LocationMode(appBase, '#' + hashPrefix);
$location.$$parse($location.$$rewrite(initialUrl));
$rootElement.on('click', function(event) {
// TODO(vojta): rewrite link when opening in new tab/window (in legacy browser)
// currently we open nice url link and redirect then
if (event.ctrlKey || event.metaKey || event.which == 2) return;
var elm = jqLite(event.target);
// traverse the DOM up to find first A tag
while (lowercase(elm[0].nodeName) !== 'a') {
// ignore rewriting if no A tag (reached root element, or no parent - removed from document)
if (elm[0] === $rootElement[0] || !(elm = elm.parent())[0]) return;
}
var absHref = elm.prop('href');
var rewrittenUrl = $location.$$rewrite(absHref);
if (absHref && !elm.attr('target') && rewrittenUrl && !event.isDefaultPrevented()) {
event.preventDefault();
if (rewrittenUrl != $browser.url()) {
// update location manually
$location.$$parse(rewrittenUrl);
$rootScope.$apply();
// hack to work around FF6 bug 684208 when scenario runner clicks on links
window.angular['ff-684208-preventDefault'] = true;
}
}
});
// rewrite hashbang url <> html5 url
if ($location.absUrl() != initialUrl) {
$browser.url($location.absUrl(), true);
}
// update $location when $browser url changes
$browser.onUrlChange(function(newUrl) {
if ($location.absUrl() != newUrl) {
if ($rootScope.$broadcast('$locationChangeStart', newUrl, $location.absUrl()).defaultPrevented) {
$browser.url($location.absUrl());
return;
}
$rootScope.$evalAsync(function() {
var oldUrl = $location.absUrl();
$location.$$parse(newUrl);
afterLocationChange(oldUrl);
});
if (!$rootScope.$$phase) $rootScope.$digest();
}
});
// update browser
var changeCounter = 0;
$rootScope.$watch(function $locationWatch() {
var oldUrl = $browser.url();
var currentReplace = $location.$$replace;
if (!changeCounter || oldUrl != $location.absUrl()) {
changeCounter++;
$rootScope.$evalAsync(function() {
if ($rootScope.$broadcast('$locationChangeStart', $location.absUrl(), oldUrl).
defaultPrevented) {
$location.$$parse(oldUrl);
} else {
$browser.url($location.absUrl(), currentReplace);
afterLocationChange(oldUrl);
}
});
}
$location.$$replace = false;
return changeCounter;
});
return $location;
function afterLocationChange(oldUrl) {
$rootScope.$broadcast('$locationChangeSuccess', $location.absUrl(), oldUrl);
}
}];
}
/**
* @ngdoc object
* @name ng.$log
* @requires $window
*
* @description
* Simple service for logging. Default implementation writes the message
* into the browser's console (if present).
*
* The main purpose of this service is to simplify debugging and troubleshooting.
*
* @example
<example>
<file name="script.js">
function LogCtrl($scope, $log) {
$scope.$log = $log;
$scope.message = 'Hello World!';
}
</file>
<file name="index.html">
<div ng-controller="LogCtrl">
<p>Reload this page with open console, enter text and hit the log button...</p>
Message:
<input type="text" ng-model="message"/>
<button ng-click="$log.log(message)">log</button>
<button ng-click="$log.warn(message)">warn</button>
<button ng-click="$log.info(message)">info</button>
<button ng-click="$log.error(message)">error</button>
</div>
</file>
</example>
*/
/**
* @ngdoc object
* @name ng.$logProvider
* @description
* Use the `$logProvider` to configure how the application logs messages
*/
function $LogProvider(){
var debug = true,
self = this;
/**
* @ngdoc property
* @name ng.$logProvider#debugEnabled
* @methodOf ng.$logProvider
* @description
* @param {string=} flag enable or disable debug level messages
* @returns {*} current value if used as getter or itself (chaining) if used as setter
*/
this.debugEnabled = function(flag) {
if (isDefined(flag)) {
debug = flag;
return this;
} else {
return debug;
}
};
this.$get = ['$window', function($window){
return {
/**
* @ngdoc method
* @name ng.$log#log
* @methodOf ng.$log
*
* @description
* Write a log message
*/
log: consoleLog('log'),
/**
* @ngdoc method
* @name ng.$log#info
* @methodOf ng.$log
*
* @description
* Write an information message
*/
info: consoleLog('info'),
/**
* @ngdoc method
* @name ng.$log#warn
* @methodOf ng.$log
*
* @description
* Write a warning message
*/
warn: consoleLog('warn'),
/**
* @ngdoc method
* @name ng.$log#error
* @methodOf ng.$log
*
* @description
* Write an error message
*/
error: consoleLog('error'),
/**
* @ngdoc method
* @name ng.$log#debug
* @methodOf ng.$log
*
* @description
* Write a debug message
*/
debug: (function () {
var fn = consoleLog('debug');
return function() {
if (debug) {
fn.apply(self, arguments);
}
}
}())
};
function formatError(arg) {
if (arg instanceof Error) {
if (arg.stack) {
arg = (arg.message && arg.stack.indexOf(arg.message) === -1)
? 'Error: ' + arg.message + '\n' + arg.stack
: arg.stack;
} else if (arg.sourceURL) {
arg = arg.message + '\n' + arg.sourceURL + ':' + arg.line;
}
}
return arg;
}
function consoleLog(type) {
var console = $window.console || {},
logFn = console[type] || console.log || noop;
if (logFn.apply) {
return function() {
var args = [];
forEach(arguments, function(arg) {
args.push(formatError(arg));
});
return logFn.apply(console, args);
};
}
// we are IE which either doesn't have window.console => this is noop and we do nothing,
// or we are IE where console.log doesn't have apply so we log at least first 2 args
return function(arg1, arg2) {
logFn(arg1, arg2);
}
}
}];
}
var $parseMinErr = minErr('$parse');
// Sandboxing Angular Expressions
// ------------------------------
// Angular expressions are generally considered safe because these expressions only have direct access to $scope and
// locals. However, one can obtain the ability to execute arbitrary JS code by obtaining a reference to native JS
// functions such as the Function constructor.
//
// As an example, consider the following Angular expression:
//
// {}.toString.constructor(alert("evil JS code"))
//
// We want to prevent this type of access. For the sake of performance, during the lexing phase we disallow any "dotted"
// access to any member named "constructor".
//
// For reflective calls (a[b]) we check that the value of the lookup is not the Function constructor while evaluating
// For reflective calls (a[b]) we check that the value of the lookup is not the Function constructor while evaluating
// the expression, which is a stronger but more expensive test. Since reflective calls are expensive anyway, this is not
// such a big deal compared to static dereferencing.
//
// This sandboxing technique is not perfect and doesn't aim to be. The goal is to prevent exploits against the
// expression language, but not to prevent exploits that were enabled by exposing sensitive JavaScript or browser apis
// on Scope. Exposing such objects on a Scope is never a good practice and therefore we are not even trying to protect
// against interaction with an object explicitly exposed in this way.
//
// A developer could foil the name check by aliasing the Function constructor under a different name on the scope.
//
// In general, it is not possible to access a Window object from an angular expression unless a window or some DOM
// object that has a reference to window is published onto a Scope.
function ensureSafeMemberName(name, fullExpression) {
if (name === "constructor") {
throw $parseMinErr('isecfld',
'Referencing "constructor" field in Angular expressions is disallowed! Expression: {0}', fullExpression);
}
return name;
};
function ensureSafeObject(obj, fullExpression) {
// nifty check if obj is Function that is fast and works across iframes and other contexts
if (obj && obj.constructor === obj) {
throw $parseMinErr('isecfn',
'Referencing Function in Angular expressions is disallowed! Expression: {0}', fullExpression);
} else {
return obj;
}
}
var OPERATORS = {
'null':function(){return null;},
'true':function(){return true;},
'false':function(){return false;},
undefined:noop,
'+':function(self, locals, a,b){
a=a(self, locals); b=b(self, locals);
if (isDefined(a)) {
if (isDefined(b)) {
return a + b;
}
return a;
}
return isDefined(b)?b:undefined;},
'-':function(self, locals, a,b){a=a(self, locals); b=b(self, locals); return (isDefined(a)?a:0)-(isDefined(b)?b:0);},
'*':function(self, locals, a,b){return a(self, locals)*b(self, locals);},
'/':function(self, locals, a,b){return a(self, locals)/b(self, locals);},
'%':function(self, locals, a,b){return a(self, locals)%b(self, locals);},
'^':function(self, locals, a,b){return a(self, locals)^b(self, locals);},
'=':noop,
'===':function(self, locals, a, b){return a(self, locals)===b(self, locals);},
'!==':function(self, locals, a, b){return a(self, locals)!==b(self, locals);},
'==':function(self, locals, a,b){return a(self, locals)==b(self, locals);},
'!=':function(self, locals, a,b){return a(self, locals)!=b(self, locals);},
'<':function(self, locals, a,b){return a(self, locals)<b(self, locals);},
'>':function(self, locals, a,b){return a(self, locals)>b(self, locals);},
'<=':function(self, locals, a,b){return a(self, locals)<=b(self, locals);},
'>=':function(self, locals, a,b){return a(self, locals)>=b(self, locals);},
'&&':function(self, locals, a,b){return a(self, locals)&&b(self, locals);},
'||':function(self, locals, a,b){return a(self, locals)||b(self, locals);},
'&':function(self, locals, a,b){return a(self, locals)&b(self, locals);},
// '|':function(self, locals, a,b){return a|b;},
'|':function(self, locals, a,b){return b(self, locals)(self, locals, a(self, locals));},
'!':function(self, locals, a){return !a(self, locals);}
};
var ESCAPE = {"n":"\n", "f":"\f", "r":"\r", "t":"\t", "v":"\v", "'":"'", '"':'"'};
function lex(text, csp){
var tokens = [],
token,
index = 0,
json = [],
ch,
lastCh = ':'; // can start regexp
while (index < text.length) {
ch = text.charAt(index);
if (is('"\'')) {
readString(ch);
} else if (isNumber(ch) || is('.') && isNumber(peek())) {
readNumber();
} else if (isIdent(ch)) {
readIdent();
// identifiers can only be if the preceding char was a { or ,
if (was('{,') && json[0]=='{' &&
(token=tokens[tokens.length-1])) {
token.json = token.text.indexOf('.') == -1;
}
} else if (is('(){}[].,;:?')) {
tokens.push({
index:index,
text:ch,
json:(was(':[,') && is('{[')) || is('}]:,')
});
if (is('{[')) json.unshift(ch);
if (is('}]')) json.shift();
index++;
} else if (isWhitespace(ch)) {
index++;
continue;
} else {
var ch2 = ch + peek(),
ch3 = ch2 + peek(2),
fn = OPERATORS[ch],
fn2 = OPERATORS[ch2],
fn3 = OPERATORS[ch3];
if (fn3) {
tokens.push({index:index, text:ch3, fn:fn3});
index += 3;
} else if (fn2) {
tokens.push({index:index, text:ch2, fn:fn2});
index += 2;
} else if (fn) {
tokens.push({index:index, text:ch, fn:fn, json: was('[,:') && is('+-')});
index += 1;
} else {
throwError("Unexpected next character ", index, index+1);
}
}
lastCh = ch;
}
return tokens;
function is(chars) {
return chars.indexOf(ch) != -1;
}
function was(chars) {
return chars.indexOf(lastCh) != -1;
}
function peek(i) {
var num = i || 1;
return index + num < text.length ? text.charAt(index + num) : false;
}
function isNumber(ch) {
return '0' <= ch && ch <= '9';
}
function isWhitespace(ch) {
return ch == ' ' || ch == '\r' || ch == '\t' ||
ch == '\n' || ch == '\v' || ch == '\u00A0'; // IE treats non-breaking space as \u00A0
}
function isIdent(ch) {
return 'a' <= ch && ch <= 'z' ||
'A' <= ch && ch <= 'Z' ||
'_' == ch || ch == '$';
}
function isExpOperator(ch) {
return ch == '-' || ch == '+' || isNumber(ch);
}
function throwError(error, start, end) {
end = end || index;
var colStr = (isDefined(start) ?
"s " + start + "-" + index + " [" + text.substring(start, end) + "]"
: " " + end);
throw $parseMinErr('lexerr', "Lexer Error: {0} at column{1} in expression [{2}].",
error, colStr, text);
}
function readNumber() {
var number = "";
var start = index;
while (index < text.length) {
var ch = lowercase(text.charAt(index));
if (ch == '.' || isNumber(ch)) {
number += ch;
} else {
var peekCh = peek();
if (ch == 'e' && isExpOperator(peekCh)) {
number += ch;
} else if (isExpOperator(ch) &&
peekCh && isNumber(peekCh) &&
number.charAt(number.length - 1) == 'e') {
number += ch;
} else if (isExpOperator(ch) &&
(!peekCh || !isNumber(peekCh)) &&
number.charAt(number.length - 1) == 'e') {
throwError('Invalid exponent');
} else {
break;
}
}
index++;
}
number = 1 * number;
tokens.push({index:start, text:number, json:true,
fn:function() {return number;}});
}
function readIdent() {
var ident = "",
start = index,
lastDot, peekIndex, methodName, ch;
while (index < text.length) {
ch = text.charAt(index);
if (ch == '.' || isIdent(ch) || isNumber(ch)) {
if (ch == '.') lastDot = index;
ident += ch;
} else {
break;
}
index++;
}
//check if this is not a method invocation and if it is back out to last dot
if (lastDot) {
peekIndex = index;
while(peekIndex < text.length) {
ch = text.charAt(peekIndex);
if (ch == '(') {
methodName = ident.substr(lastDot - start + 1);
ident = ident.substr(0, lastDot - start);
index = peekIndex;
break;
}
if(isWhitespace(ch)) {
peekIndex++;
} else {
break;
}
}
}
var token = {
index:start,
text:ident
};
if (OPERATORS.hasOwnProperty(ident)) {
token.fn = token.json = OPERATORS[ident];
} else {
var getter = getterFn(ident, csp, text);
token.fn = extend(function(self, locals) {
return (getter(self, locals));
}, {
assign: function(self, value) {
return setter(self, ident, value, text);
}
});
}
tokens.push(token);
if (methodName) {
tokens.push({
index:lastDot,
text: '.',
json: false
});
tokens.push({
index: lastDot + 1,
text: methodName,
json: false
});
}
}
function readString(quote) {
var start = index;
index++;
var string = "";
var rawString = quote;
var escape = false;
while (index < text.length) {
var ch = text.charAt(index);
rawString += ch;
if (escape) {
if (ch == 'u') {
var hex = text.substring(index + 1, index + 5);
if (!hex.match(/[\da-f]{4}/i))
throwError( "Invalid unicode escape [\\u" + hex + "]");
index += 4;
string += String.fromCharCode(parseInt(hex, 16));
} else {
var rep = ESCAPE[ch];
if (rep) {
string += rep;
} else {
string += ch;
}
}
escape = false;
} else if (ch == '\\') {
escape = true;
} else if (ch == quote) {
index++;
tokens.push({
index:start,
text:rawString,
string:string,
json:true,
fn:function() { return string; }
});
return;
} else {
string += ch;
}
index++;
}
throwError("Unterminated quote", start);
}
}
/////////////////////////////////////////
function parser(text, json, $filter, csp){
var ZERO = valueFn(0),
value,
tokens = lex(text, csp),
assignment = _assignment,
functionCall = _functionCall,
fieldAccess = _fieldAccess,
objectIndex = _objectIndex,
filterChain = _filterChain;
if(json){
// The extra level of aliasing is here, just in case the lexer misses something, so that
// we prevent any accidental execution in JSON.
assignment = logicalOR;
functionCall =
fieldAccess =
objectIndex =
filterChain =
function() { throwError("is not valid json", {text:text, index:0}); };
value = primary();
} else {
value = statements();
}
if (tokens.length !== 0) {
throwError("is an unexpected token", tokens[0]);
}
value.literal = !!value.literal;
value.constant = !!value.constant;
return value;
///////////////////////////////////
function throwError(msg, token) {
throw $parseMinErr('syntax',
"Syntax Error: Token '{0}' {1} at column {2} of the expression [{3}] starting at [{4}].",
token.text, msg, (token.index + 1), text, text.substring(token.index));
}
function peekToken() {
if (tokens.length === 0)
throw $parseMinErr('ueoe', "Unexpected end of expression: {0}", text);
return tokens[0];
}
function peek(e1, e2, e3, e4) {
if (tokens.length > 0) {
var token = tokens[0];
var t = token.text;
if (t==e1 || t==e2 || t==e3 || t==e4 ||
(!e1 && !e2 && !e3 && !e4)) {
return token;
}
}
return false;
}
function expect(e1, e2, e3, e4){
var token = peek(e1, e2, e3, e4);
if (token) {
if (json && !token.json) {
throwError("is not valid json", token);
}
tokens.shift();
return token;
}
return false;
}
function consume(e1){
if (!expect(e1)) {
throwError("is unexpected, expecting [" + e1 + "]", peek());
}
}
function unaryFn(fn, right) {
return extend(function(self, locals) {
return fn(self, locals, right);
}, {
constant:right.constant
});
}
function ternaryFn(left, middle, right){
return extend(function(self, locals){
return left(self, locals) ? middle(self, locals) : right(self, locals);
}, {
constant: left.constant && middle.constant && right.constant
});
}
function binaryFn(left, fn, right) {
return extend(function(self, locals) {
return fn(self, locals, left, right);
}, {
constant:left.constant && right.constant
});
}
function statements() {
var statements = [];
while(true) {
if (tokens.length > 0 && !peek('}', ')', ';', ']'))
statements.push(filterChain());
if (!expect(';')) {
// optimize for the common case where there is only one statement.
// TODO(size): maybe we should not support multiple statements?
return statements.length == 1
? statements[0]
: function(self, locals){
var value;
for ( var i = 0; i < statements.length; i++) {
var statement = statements[i];
if (statement)
value = statement(self, locals);
}
return value;
};
}
}
}
function _filterChain() {
var left = expression();
var token;
while(true) {
if ((token = expect('|'))) {
left = binaryFn(left, token.fn, filter());
} else {
return left;
}
}
}
function filter() {
var token = expect();
var fn = $filter(token.text);
var argsFn = [];
while(true) {
if ((token = expect(':'))) {
argsFn.push(expression());
} else {
var fnInvoke = function(self, locals, input){
var args = [input];
for ( var i = 0; i < argsFn.length; i++) {
args.push(argsFn[i](self, locals));
}
return fn.apply(self, args);
};
return function() {
return fnInvoke;
};
}
}
}
function expression() {
return assignment();
}
function _assignment() {
var left = ternary();
var right;
var token;
if ((token = expect('='))) {
if (!left.assign) {
throwError("implies assignment but [" +
text.substring(0, token.index) + "] can not be assigned to", token);
}
right = ternary();
return function(scope, locals){
return left.assign(scope, right(scope, locals), locals);
};
} else {
return left;
}
}
function ternary() {
var left = logicalOR();
var middle;
var token;
if((token = expect('?'))){
middle = ternary();
if((token = expect(':'))){
return ternaryFn(left, middle, ternary());
}
else {
throwError('expected :', token);
}
}
else {
return left;
}
}
function logicalOR() {
var left = logicalAND();
var token;
while(true) {
if ((token = expect('||'))) {
left = binaryFn(left, token.fn, logicalAND());
} else {
return left;
}
}
}
function logicalAND() {
var left = equality();
var token;
if ((token = expect('&&'))) {
left = binaryFn(left, token.fn, logicalAND());
}
return left;
}
function equality() {
var left = relational();
var token;
if ((token = expect('==','!=','===','!=='))) {
left = binaryFn(left, token.fn, equality());
}
return left;
}
function relational() {
var left = additive();
var token;
if ((token = expect('<', '>', '<=', '>='))) {
left = binaryFn(left, token.fn, relational());
}
return left;
}
function additive() {
var left = multiplicative();
var token;
while ((token = expect('+','-'))) {
left = binaryFn(left, token.fn, multiplicative());
}
return left;
}
function multiplicative() {
var left = unary();
var token;
while ((token = expect('*','/','%'))) {
left = binaryFn(left, token.fn, unary());
}
return left;
}
function unary() {
var token;
if (expect('+')) {
return primary();
} else if ((token = expect('-'))) {
return binaryFn(ZERO, token.fn, unary());
} else if ((token = expect('!'))) {
return unaryFn(token.fn, unary());
} else {
return primary();
}
}
function primary() {
var primary;
if (expect('(')) {
primary = filterChain();
consume(')');
} else if (expect('[')) {
primary = arrayDeclaration();
} else if (expect('{')) {
primary = object();
} else {
var token = expect();
primary = token.fn;
if (!primary) {
throwError("not a primary expression", token);
}
if (token.json) {
primary.constant = primary.literal = true;
}
}
var next, context;
while ((next = expect('(', '[', '.'))) {
if (next.text === '(') {
primary = functionCall(primary, context);
context = null;
} else if (next.text === '[') {
context = primary;
primary = objectIndex(primary);
} else if (next.text === '.') {
context = primary;
primary = fieldAccess(primary);
} else {
throwError("IMPOSSIBLE");
}
}
return primary;
}
function _fieldAccess(object) {
var field = expect().text;
var getter = getterFn(field, csp, text);
return extend(
function(scope, locals, self) {
return getter(self || object(scope, locals), locals);
},
{
assign:function(scope, value, locals) {
return setter(object(scope, locals), field, value, text);
}
}
);
}
function _objectIndex(obj) {
var indexFn = expression();
consume(']');
return extend(
function(self, locals){
var o = obj(self, locals),
i = indexFn(self, locals),
v, p;
if (!o) return undefined;
v = ensureSafeObject(o[i], text);
if (v && v.then) {
p = v;
if (!('$$v' in v)) {
p.$$v = undefined;
p.then(function(val) { p.$$v = val; });
}
v = v.$$v;
}
return v;
}, {
assign:function(self, value, locals){
var key = indexFn(self, locals);
// prevent overwriting of Function.constructor which would break ensureSafeObject check
return ensureSafeObject(obj(self, locals), text)[key] = value;
}
});
}
function _functionCall(fn, contextGetter) {
var argsFn = [];
if (peekToken().text != ')') {
do {
argsFn.push(expression());
} while (expect(','));
}
consume(')');
return function(scope, locals){
var args = [],
context = contextGetter ? contextGetter(scope, locals) : scope;
for ( var i = 0; i < argsFn.length; i++) {
args.push(argsFn[i](scope, locals));
}
var fnPtr = fn(scope, locals, context) || noop;
// IE stupidity!
return fnPtr.apply
? fnPtr.apply(context, args)
: fnPtr(args[0], args[1], args[2], args[3], args[4]);
};
}
// This is used with json array declaration
function arrayDeclaration () {
var elementFns = [];
var allConstant = true;
if (peekToken().text != ']') {
do {
var elementFn = expression();
elementFns.push(elementFn);
if (!elementFn.constant) {
allConstant = false;
}
} while (expect(','));
}
consume(']');
return extend(function(self, locals){
var array = [];
for ( var i = 0; i < elementFns.length; i++) {
array.push(elementFns[i](self, locals));
}
return array;
}, {
literal:true,
constant:allConstant
});
}
function object () {
var keyValues = [];
var allConstant = true;
if (peekToken().text != '}') {
do {
var token = expect(),
key = token.string || token.text;
consume(":");
var value = expression();
keyValues.push({key:key, value:value});
if (!value.constant) {
allConstant = false;
}
} while (expect(','));
}
consume('}');
return extend(function(self, locals){
var object = {};
for ( var i = 0; i < keyValues.length; i++) {
var keyValue = keyValues[i];
object[keyValue.key] = keyValue.value(self, locals);
}
return object;
}, {
literal:true,
constant:allConstant
});
}
}
//////////////////////////////////////////////////
// Parser helper functions
//////////////////////////////////////////////////
function setter(obj, path, setValue, fullExp) {
var element = path.split('.'), key;
for (var i = 0; element.length > 1; i++) {
key = ensureSafeMemberName(element.shift(), fullExp);
var propertyObj = obj[key];
if (!propertyObj) {
propertyObj = {};
obj[key] = propertyObj;
}
obj = propertyObj;
if (obj.then) {
if (!("$$v" in obj)) {
(function(promise) {
promise.then(function(val) { promise.$$v = val; }); }
)(obj);
}
if (obj.$$v === undefined) {
obj.$$v = {};
}
obj = obj.$$v;
}
}
key = ensureSafeMemberName(element.shift(), fullExp);
obj[key] = setValue;
return setValue;
}
var getterFnCache = {};
/**
* Implementation of the "Black Hole" variant from:
* - http://jsperf.com/angularjs-parse-getter/4
* - http://jsperf.com/path-evaluation-simplified/7
*/
function cspSafeGetterFn(key0, key1, key2, key3, key4, fullExp) {
ensureSafeMemberName(key0, fullExp);
ensureSafeMemberName(key1, fullExp);
ensureSafeMemberName(key2, fullExp);
ensureSafeMemberName(key3, fullExp);
ensureSafeMemberName(key4, fullExp);
return function(scope, locals) {
var pathVal = (locals && locals.hasOwnProperty(key0)) ? locals : scope,
promise;
if (pathVal === null || pathVal === undefined) return pathVal;
pathVal = pathVal[key0];
if (pathVal && pathVal.then) {
if (!("$$v" in pathVal)) {
promise = pathVal;
promise.$$v = undefined;
promise.then(function(val) { promise.$$v = val; });
}
pathVal = pathVal.$$v;
}
if (!key1 || pathVal === null || pathVal === undefined) return pathVal;
pathVal = pathVal[key1];
if (pathVal && pathVal.then) {
if (!("$$v" in pathVal)) {
promise = pathVal;
promise.$$v = undefined;
promise.then(function(val) { promise.$$v = val; });
}
pathVal = pathVal.$$v;
}
if (!key2 || pathVal === null || pathVal === undefined) return pathVal;
pathVal = pathVal[key2];
if (pathVal && pathVal.then) {
if (!("$$v" in pathVal)) {
promise = pathVal;
promise.$$v = undefined;
promise.then(function(val) { promise.$$v = val; });
}
pathVal = pathVal.$$v;
}
if (!key3 || pathVal === null || pathVal === undefined) return pathVal;
pathVal = pathVal[key3];
if (pathVal && pathVal.then) {
if (!("$$v" in pathVal)) {
promise = pathVal;
promise.$$v = undefined;
promise.then(function(val) { promise.$$v = val; });
}
pathVal = pathVal.$$v;
}
if (!key4 || pathVal === null || pathVal === undefined) return pathVal;
pathVal = pathVal[key4];
if (pathVal && pathVal.then) {
if (!("$$v" in pathVal)) {
promise = pathVal;
promise.$$v = undefined;
promise.then(function(val) { promise.$$v = val; });
}
pathVal = pathVal.$$v;
}
return pathVal;
};
}
function getterFn(path, csp, fullExp) {
if (getterFnCache.hasOwnProperty(path)) {
return getterFnCache[path];
}
var pathKeys = path.split('.'),
pathKeysLength = pathKeys.length,
fn;
if (csp) {
fn = (pathKeysLength < 6)
? cspSafeGetterFn(pathKeys[0], pathKeys[1], pathKeys[2], pathKeys[3], pathKeys[4], fullExp)
: function(scope, locals) {
var i = 0, val;
do {
val = cspSafeGetterFn(
pathKeys[i++], pathKeys[i++], pathKeys[i++], pathKeys[i++], pathKeys[i++], fullExp
)(scope, locals);
locals = undefined; // clear after first iteration
scope = val;
} while (i < pathKeysLength);
return val;
}
} else {
var code = 'var l, fn, p;\n';
forEach(pathKeys, function(key, index) {
ensureSafeMemberName(key, fullExp);
code += 'if(s === null || s === undefined) return s;\n' +
'l=s;\n' +
's='+ (index
// we simply dereference 's' on any .dot notation
? 's'
// but if we are first then we check locals first, and if so read it first
: '((k&&k.hasOwnProperty("' + key + '"))?k:s)') + '["' + key + '"]' + ';\n' +
'if (s && s.then) {\n' +
' if (!("$$v" in s)) {\n' +
' p=s;\n' +
' p.$$v = undefined;\n' +
' p.then(function(v) {p.$$v=v;});\n' +
'}\n' +
' s=s.$$v\n' +
'}\n';
});
code += 'return s;';
fn = Function('s', 'k', code); // s=scope, k=locals
fn.toString = function() { return code; };
}
return getterFnCache[path] = fn;
}
///////////////////////////////////
/**
* @ngdoc function
* @name ng.$parse
* @function
*
* @description
*
* Converts Angular {@link guide/expression expression} into a function.
*
* <pre>
* var getter = $parse('user.name');
* var setter = getter.assign;
* var context = {user:{name:'angular'}};
* var locals = {user:{name:'local'}};
*
* expect(getter(context)).toEqual('angular');
* setter(context, 'newValue');
* expect(context.user.name).toEqual('newValue');
* expect(getter(context, locals)).toEqual('local');
* </pre>
*
*
* @param {string} expression String expression to compile.
* @returns {function(context, locals)} a function which represents the compiled expression:
*
* * `context` – `{object}` – an object against which any expressions embedded in the strings
* are evaluated against (typically a scope object).
* * `locals` – `{object=}` – local variables context object, useful for overriding values in
* `context`.
*
* The returned function also has the following properties:
* * `literal` – `{boolean}` – whether the expression's top-level node is a JavaScript
* literal.
* * `constant` – `{boolean}` – whether the expression is made entirely of JavaScript
* constant literals.
* * `assign` – `{?function(context, value)}` – if the expression is assignable, this will be
* set to a function to change its value on the given context.
*
*/
function $ParseProvider() {
var cache = {};
this.$get = ['$filter', '$sniffer', function($filter, $sniffer) {
return function(exp) {
switch(typeof exp) {
case 'string':
return cache.hasOwnProperty(exp)
? cache[exp]
: cache[exp] = parser(exp, false, $filter, $sniffer.csp);
case 'function':
return exp;
default:
return noop;
}
};
}];
}
/**
* @ngdoc service
* @name ng.$q
* @requires $rootScope
*
* @description
* A promise/deferred implementation inspired by [Kris Kowal's Q](https://github.com/kriskowal/q).
*
* [The CommonJS Promise proposal](http://wiki.commonjs.org/wiki/Promises) describes a promise as an
* interface for interacting with an object that represents the result of an action that is
* performed asynchronously, and may or may not be finished at any given point in time.
*
* From the perspective of dealing with error handling, deferred and promise APIs are to
* asynchronous programming what `try`, `catch` and `throw` keywords are to synchronous programming.
*
* <pre>
* // for the purpose of this example let's assume that variables `$q` and `scope` are
* // available in the current lexical scope (they could have been injected or passed in).
*
* function asyncGreet(name) {
* var deferred = $q.defer();
*
* setTimeout(function() {
* // since this fn executes async in a future turn of the event loop, we need to wrap
* // our code into an $apply call so that the model changes are properly observed.
* scope.$apply(function() {
* if (okToGreet(name)) {
* deferred.resolve('Hello, ' + name + '!');
* } else {
* deferred.reject('Greeting ' + name + ' is not allowed.');
* }
* });
* }, 1000);
*
* return deferred.promise;
* }
*
* var promise = asyncGreet('Robin Hood');
* promise.then(function(greeting) {
* alert('Success: ' + greeting);
* }, function(reason) {
* alert('Failed: ' + reason);
* });
* </pre>
*
* At first it might not be obvious why this extra complexity is worth the trouble. The payoff
* comes in the way of
* [guarantees that promise and deferred APIs make](https://github.com/kriskowal/uncommonjs/blob/master/promises/specification.md).
*
* Additionally the promise api allows for composition that is very hard to do with the
* traditional callback ([CPS](http://en.wikipedia.org/wiki/Continuation-passing_style)) approach.
* For more on this please see the [Q documentation](https://github.com/kriskowal/q) especially the
* section on serial or parallel joining of promises.
*
*
* # The Deferred API
*
* A new instance of deferred is constructed by calling `$q.defer()`.
*
* The purpose of the deferred object is to expose the associated Promise instance as well as APIs
* that can be used for signaling the successful or unsuccessful completion of the task.
*
* **Methods**
*
* - `resolve(value)` – resolves the derived promise with the `value`. If the value is a rejection
* constructed via `$q.reject`, the promise will be rejected instead.
* - `reject(reason)` – rejects the derived promise with the `reason`. This is equivalent to
* resolving it with a rejection constructed via `$q.reject`.
*
* **Properties**
*
* - promise – `{Promise}` – promise object associated with this deferred.
*
*
* # The Promise API
*
* A new promise instance is created when a deferred instance is created and can be retrieved by
* calling `deferred.promise`.
*
* The purpose of the promise object is to allow for interested parties to get access to the result
* of the deferred task when it completes.
*
* **Methods**
*
* - `then(successCallback, errorCallback)` – regardless of when the promise was or will be resolved
* or rejected, `then` calls one of the success or error callbacks asynchronously as soon as the result
* is available. The callbacks are called with a single argument: the result or rejection reason.
*
* This method *returns a new promise* which is resolved or rejected via the return value of the
* `successCallback` or `errorCallback`.
*
* - `catch(errorCallback)` – shorthand for `promise.then(null, errorCallback)`
*
* - `finally(callback)` – allows you to observe either the fulfillment or rejection of a promise,
* but to do so without modifying the final value. This is useful to release resources or do some
* clean-up that needs to be done whether the promise was rejected or resolved. See the [full
* specification](https://github.com/kriskowal/q/wiki/API-Reference#promisefinallycallback) for
* more information.
*
* Because `finally` is a reserved word in JavaScript and reserved keywords are not supported as
* property names by ES3, you'll need to invoke the method like `promise['finally'](callback)` to
* make your code IE8 compatible.
*
* # Chaining promises
*
* Because calling the `then` method of a promise returns a new derived promise, it is easily possible
* to create a chain of promises:
*
* <pre>
* promiseB = promiseA.then(function(result) {
* return result + 1;
* });
*
* // promiseB will be resolved immediately after promiseA is resolved and its value
* // will be the result of promiseA incremented by 1
* </pre>
*
* It is possible to create chains of any length and since a promise can be resolved with another
* promise (which will defer its resolution further), it is possible to pause/defer resolution of
* the promises at any point in the chain. This makes it possible to implement powerful APIs like
* $http's response interceptors.
*
*
* # Differences between Kris Kowal's Q and $q
*
* There are three main differences:
*
* - $q is integrated with the {@link ng.$rootScope.Scope} Scope model observation
* mechanism in angular, which means faster propagation of resolution or rejection into your
* models and avoiding unnecessary browser repaints, which would result in flickering UI.
* - $q promises are recognized by the templating engine in angular, which means that in templates
* you can treat promises attached to a scope as if they were the resulting values.
* - Q has many more features than $q, but that comes at a cost of bytes. $q is tiny, but contains
* all the important functionality needed for common async tasks.
*
* # Testing
*
* <pre>
* it('should simulate promise', inject(function($q, $rootScope) {
* var deferred = $q.defer();
* var promise = deferred.promise;
* var resolvedValue;
*
* promise.then(function(value) { resolvedValue = value; });
* expect(resolvedValue).toBeUndefined();
*
* // Simulate resolving of promise
* deferred.resolve(123);
* // Note that the 'then' function does not get called synchronously.
* // This is because we want the promise API to always be async, whether or not
* // it got called synchronously or asynchronously.
* expect(resolvedValue).toBeUndefined();
*
* // Propagate promise resolution to 'then' functions using $apply().
* $rootScope.$apply();
* expect(resolvedValue).toEqual(123);
* });
* </pre>
*/
function $QProvider() {
this.$get = ['$rootScope', '$exceptionHandler', function($rootScope, $exceptionHandler) {
return qFactory(function(callback) {
$rootScope.$evalAsync(callback);
}, $exceptionHandler);
}];
}
/**
* Constructs a promise manager.
*
* @param {function(function)} nextTick Function for executing functions in the next turn.
* @param {function(...*)} exceptionHandler Function into which unexpected exceptions are passed for
* debugging purposes.
* @returns {object} Promise manager.
*/
function qFactory(nextTick, exceptionHandler) {
/**
* @ngdoc
* @name ng.$q#defer
* @methodOf ng.$q
* @description
* Creates a `Deferred` object which represents a task which will finish in the future.
*
* @returns {Deferred} Returns a new instance of deferred.
*/
var defer = function() {
var pending = [],
value, deferred;
deferred = {
resolve: function(val) {
if (pending) {
var callbacks = pending;
pending = undefined;
value = ref(val);
if (callbacks.length) {
nextTick(function() {
var callback;
for (var i = 0, ii = callbacks.length; i < ii; i++) {
callback = callbacks[i];
value.then(callback[0], callback[1], callback[2]);
}
});
}
}
},
reject: function(reason) {
deferred.resolve(reject(reason));
},
notify: function(progress) {
if (pending) {
var callbacks = pending;
if (pending.length) {
nextTick(function() {
var callback;
for (var i = 0, ii = callbacks.length; i < ii; i++) {
callback = callbacks[i];
callback[2](progress);
}
});
}
}
},
promise: {
then: function(callback, errback, progressback) {
var result = defer();
var wrappedCallback = function(value) {
try {
result.resolve((callback || defaultCallback)(value));
} catch(e) {
result.reject(e);
exceptionHandler(e);
}
};
var wrappedErrback = function(reason) {
try {
result.resolve((errback || defaultErrback)(reason));
} catch(e) {
result.reject(e);
exceptionHandler(e);
}
};
var wrappedProgressback = function(progress) {
try {
result.notify((progressback || defaultCallback)(progress));
} catch(e) {
exceptionHandler(e);
}
};
if (pending) {
pending.push([wrappedCallback, wrappedErrback, wrappedProgressback]);
} else {
value.then(wrappedCallback, wrappedErrback, wrappedProgressback);
}
return result.promise;
},
"catch": function(callback) {
return this.then(null, callback);
},
"finally": function(callback) {
function makePromise(value, resolved) {
var result = defer();
if (resolved) {
result.resolve(value);
} else {
result.reject(value);
}
return result.promise;
}
function handleCallback(value, isResolved) {
var callbackOutput = null;
try {
callbackOutput = (callback ||defaultCallback)();
} catch(e) {
return makePromise(e, false);
}
if (callbackOutput && callbackOutput.then) {
return callbackOutput.then(function() {
return makePromise(value, isResolved);
}, function(error) {
return makePromise(error, false);
});
} else {
return makePromise(value, isResolved);
}
}
return this.then(function(value) {
return handleCallback(value, true);
}, function(error) {
return handleCallback(error, false);
});
}
}
};
return deferred;
};
var ref = function(value) {
if (value && value.then) return value;
return {
then: function(callback) {
var result = defer();
nextTick(function() {
result.resolve(callback(value));
});
return result.promise;
}
};
};
/**
* @ngdoc
* @name ng.$q#reject
* @methodOf ng.$q
* @description
* Creates a promise that is resolved as rejected with the specified `reason`. This api should be
* used to forward rejection in a chain of promises. If you are dealing with the last promise in
* a promise chain, you don't need to worry about it.
*
* When comparing deferreds/promises to the familiar behavior of try/catch/throw, think of
* `reject` as the `throw` keyword in JavaScript. This also means that if you "catch" an error via
* a promise error callback and you want to forward the error to the promise derived from the
* current promise, you have to "rethrow" the error by returning a rejection constructed via
* `reject`.
*
* <pre>
* promiseB = promiseA.then(function(result) {
* // success: do something and resolve promiseB
* // with the old or a new result
* return result;
* }, function(reason) {
* // error: handle the error if possible and
* // resolve promiseB with newPromiseOrValue,
* // otherwise forward the rejection to promiseB
* if (canHandle(reason)) {
* // handle the error and recover
* return newPromiseOrValue;
* }
* return $q.reject(reason);
* });
* </pre>
*
* @param {*} reason Constant, message, exception or an object representing the rejection reason.
* @returns {Promise} Returns a promise that was already resolved as rejected with the `reason`.
*/
var reject = function(reason) {
return {
then: function(callback, errback) {
var result = defer();
nextTick(function() {
result.resolve((errback || defaultErrback)(reason));
});
return result.promise;
}
};
};
/**
* @ngdoc
* @name ng.$q#when
* @methodOf ng.$q
* @description
* Wraps an object that might be a value or a (3rd party) then-able promise into a $q promise.
* This is useful when you are dealing with an object that might or might not be a promise, or if
* the promise comes from a source that can't be trusted.
*
* @param {*} value Value or a promise
* @returns {Promise} Returns a promise of the passed value or promise
*/
var when = function(value, callback, errback, progressback) {
var result = defer(),
done;
var wrappedCallback = function(value) {
try {
return (callback || defaultCallback)(value);
} catch (e) {
exceptionHandler(e);
return reject(e);
}
};
var wrappedErrback = function(reason) {
try {
return (errback || defaultErrback)(reason);
} catch (e) {
exceptionHandler(e);
return reject(e);
}
};
var wrappedProgressback = function(progress) {
try {
return (progressback || defaultCallback)(progress);
} catch (e) {
exceptionHandler(e);
}
};
nextTick(function() {
ref(value).then(function(value) {
if (done) return;
done = true;
result.resolve(ref(value).then(wrappedCallback, wrappedErrback, wrappedProgressback));
}, function(reason) {
if (done) return;
done = true;
result.resolve(wrappedErrback(reason));
}, function(progress) {
if (done) return;
result.notify(wrappedProgressback(progress));
});
});
return result.promise;
};
function defaultCallback(value) {
return value;
}
function defaultErrback(reason) {
return reject(reason);
}
/**
* @ngdoc
* @name ng.$q#all
* @methodOf ng.$q
* @description
* Combines multiple promises into a single promise that is resolved when all of the input
* promises are resolved.
*
* @param {Array.<Promise>|Object.<Promise>} promises An array or hash of promises.
* @returns {Promise} Returns a single promise that will be resolved with an array/hash of values,
* each value corresponding to the promise at the same index/key in the `promises` array/hash. If any of
* the promises is resolved with a rejection, this resulting promise will be resolved with the
* same rejection.
*/
function all(promises) {
var deferred = defer(),
counter = 0,
results = isArray(promises) ? [] : {};
forEach(promises, function(promise, key) {
counter++;
ref(promise).then(function(value) {
if (results.hasOwnProperty(key)) return;
results[key] = value;
if (!(--counter)) deferred.resolve(results);
}, function(reason) {
if (results.hasOwnProperty(key)) return;
deferred.reject(reason);
});
});
if (counter === 0) {
deferred.resolve(results);
}
return deferred.promise;
}
return {
defer: defer,
reject: reject,
when: when,
all: all
};
}
/**
* DESIGN NOTES
*
* The design decisions behind the scope are heavily favored for speed and memory consumption.
*
* The typical use of scope is to watch the expressions, which most of the time return the same
* value as last time so we optimize the operation.
*
* Closures construction is expensive in terms of speed as well as memory:
* - No closures, instead use prototypical inheritance for API
* - Internal state needs to be stored on scope directly, which means that private state is
* exposed as $$____ properties
*
* Loop operations are optimized by using while(count--) { ... }
* - this means that in order to keep the same order of execution as addition we have to add
* items to the array at the beginning (shift) instead of at the end (push)
*
* Child scopes are created and removed often
* - Using an array would be slow since inserts in middle are expensive so we use linked list
*
* There are few watches then a lot of observers. This is why you don't want the observer to be
* implemented in the same way as watch. Watch requires return of initialization function which
* are expensive to construct.
*/
/**
* @ngdoc object
* @name ng.$rootScopeProvider
* @description
*
* Provider for the $rootScope service.
*/
/**
* @ngdoc function
* @name ng.$rootScopeProvider#digestTtl
* @methodOf ng.$rootScopeProvider
* @description
*
* Sets the number of digest iterations the scope should attempt to execute before giving up and
* assuming that the model is unstable.
*
* The current default is 10 iterations.
*
* @param {number} limit The number of digest iterations.
*/
/**
* @ngdoc object
* @name ng.$rootScope
* @description
*
* Every application has a single root {@link ng.$rootScope.Scope scope}.
* All other scopes are child scopes of the root scope. Scopes provide mechanism for watching the model and provide
* event processing life-cycle. See {@link guide/scope developer guide on scopes}.
*/
function $RootScopeProvider(){
var TTL = 10;
var $rootScopeMinErr = minErr('$rootScope');
this.digestTtl = function(value) {
if (arguments.length) {
TTL = value;
}
return TTL;
};
this.$get = ['$injector', '$exceptionHandler', '$parse',
function( $injector, $exceptionHandler, $parse) {
/**
* @ngdoc function
* @name ng.$rootScope.Scope
*
* @description
* A root scope can be retrieved using the {@link ng.$rootScope $rootScope} key from the
* {@link AUTO.$injector $injector}. Child scopes are created using the
* {@link ng.$rootScope.Scope#$new $new()} method. (Most scopes are created automatically when
* compiled HTML template is executed.)
*
* Here is a simple scope snippet to show how you can interact with the scope.
* <pre>
* <file src="./test/ng/rootScopeSpec.js" tag="docs1" />
* </pre>
*
* # Inheritance
* A scope can inherit from a parent scope, as in this example:
* <pre>
var parent = $rootScope;
var child = parent.$new();
parent.salutation = "Hello";
child.name = "World";
expect(child.salutation).toEqual('Hello');
child.salutation = "Welcome";
expect(child.salutation).toEqual('Welcome');
expect(parent.salutation).toEqual('Hello');
* </pre>
*
*
* @param {Object.<string, function()>=} providers Map of service factory which need to be provided
* for the current scope. Defaults to {@link ng}.
* @param {Object.<string, *>=} instanceCache Provides pre-instantiated services which should
* append/override services provided by `providers`. This is handy when unit-testing and having
* the need to override a default service.
* @returns {Object} Newly created scope.
*
*/
function Scope() {
this.$id = nextUid();
this.$$phase = this.$parent = this.$$watchers =
this.$$nextSibling = this.$$prevSibling =
this.$$childHead = this.$$childTail = null;
this['this'] = this.$root = this;
this.$$destroyed = false;
this.$$asyncQueue = [];
this.$$listeners = {};
this.$$isolateBindings = {};
}
/**
* @ngdoc property
* @name ng.$rootScope.Scope#$id
* @propertyOf ng.$rootScope.Scope
* @returns {number} Unique scope ID (monotonically increasing alphanumeric sequence) useful for
* debugging.
*/
Scope.prototype = {
/**
* @ngdoc function
* @name ng.$rootScope.Scope#$new
* @methodOf ng.$rootScope.Scope
* @function
*
* @description
* Creates a new child {@link ng.$rootScope.Scope scope}.
*
* The parent scope will propagate the {@link ng.$rootScope.Scope#$digest $digest()} and
* {@link ng.$rootScope.Scope#$digest $digest()} events. The scope can be removed from the scope
* hierarchy using {@link ng.$rootScope.Scope#$destroy $destroy()}.
*
* {@link ng.$rootScope.Scope#$destroy $destroy()} must be called on a scope when it is desired for
* the scope and its child scopes to be permanently detached from the parent and thus stop
* participating in model change detection and listener notification by invoking.
*
* @param {boolean} isolate if true then the scope does not prototypically inherit from the
* parent scope. The scope is isolated, as it can not see parent scope properties.
* When creating widgets it is useful for the widget to not accidentally read parent
* state.
*
* @returns {Object} The newly created child scope.
*
*/
$new: function(isolate) {
var Child,
child;
if (isolate) {
child = new Scope();
child.$root = this.$root;
// ensure that there is just one async queue per $rootScope and it's children
child.$$asyncQueue = this.$$asyncQueue;
} else {
Child = function() {}; // should be anonymous; This is so that when the minifier munges
// the name it does not become random set of chars. These will then show up as class
// name in the debugger.
Child.prototype = this;
child = new Child();
child.$id = nextUid();
}
child['this'] = child;
child.$$listeners = {};
child.$parent = this;
child.$$watchers = child.$$nextSibling = child.$$childHead = child.$$childTail = null;
child.$$prevSibling = this.$$childTail;
if (this.$$childHead) {
this.$$childTail.$$nextSibling = child;
this.$$childTail = child;
} else {
this.$$childHead = this.$$childTail = child;
}
return child;
},
/**
* @ngdoc function
* @name ng.$rootScope.Scope#$watch
* @methodOf ng.$rootScope.Scope
* @function
*
* @description
* Registers a `listener` callback to be executed whenever the `watchExpression` changes.
*
* - The `watchExpression` is called on every call to {@link ng.$rootScope.Scope#$digest $digest()} and
* should return the value which will be watched. (Since {@link ng.$rootScope.Scope#$digest $digest()}
* reruns when it detects changes the `watchExpression` can execute multiple times per
* {@link ng.$rootScope.Scope#$digest $digest()} and should be idempotent.)
* - The `listener` is called only when the value from the current `watchExpression` and the
* previous call to `watchExpression` are not equal (with the exception of the initial run,
* see below). The inequality is determined according to
* {@link angular.equals} function. To save the value of the object for later comparison, the
* {@link angular.copy} function is used. It also means that watching complex options will
* have adverse memory and performance implications.
* - The watch `listener` may change the model, which may trigger other `listener`s to fire. This
* is achieved by rerunning the watchers until no changes are detected. The rerun iteration
* limit is 10 to prevent an infinite loop deadlock.
*
*
* If you want to be notified whenever {@link ng.$rootScope.Scope#$digest $digest} is called,
* you can register a `watchExpression` function with no `listener`. (Since `watchExpression`
* can execute multiple times per {@link ng.$rootScope.Scope#$digest $digest} cycle when a change is
* detected, be prepared for multiple calls to your listener.)
*
* After a watcher is registered with the scope, the `listener` fn is called asynchronously
* (via {@link ng.$rootScope.Scope#$evalAsync $evalAsync}) to initialize the
* watcher. In rare cases, this is undesirable because the listener is called when the result
* of `watchExpression` didn't change. To detect this scenario within the `listener` fn, you
* can compare the `newVal` and `oldVal`. If these two values are identical (`===`) then the
* listener was called due to initialization.
*
*
* # Example
* <pre>
// let's assume that scope was dependency injected as the $rootScope
var scope = $rootScope;
scope.name = 'misko';
scope.counter = 0;
expect(scope.counter).toEqual(0);
scope.$watch('name', function(newValue, oldValue) { scope.counter = scope.counter + 1; });
expect(scope.counter).toEqual(0);
scope.$digest();
// no variable change
expect(scope.counter).toEqual(0);
scope.name = 'adam';
scope.$digest();
expect(scope.counter).toEqual(1);
* </pre>
*
*
*
* @param {(function()|string)} watchExpression Expression that is evaluated on each
* {@link ng.$rootScope.Scope#$digest $digest} cycle. A change in the return value triggers a
* call to the `listener`.
*
* - `string`: Evaluated as {@link guide/expression expression}
* - `function(scope)`: called with current `scope` as a parameter.
* @param {(function()|string)=} listener Callback called whenever the return value of
* the `watchExpression` changes.
*
* - `string`: Evaluated as {@link guide/expression expression}
* - `function(newValue, oldValue, scope)`: called with current and previous values as parameters.
*
* @param {boolean=} objectEquality Compare object for equality rather than for reference.
* @returns {function()} Returns a deregistration function for this listener.
*/
$watch: function(watchExp, listener, objectEquality) {
var scope = this,
get = compileToFn(watchExp, 'watch'),
array = scope.$$watchers,
watcher = {
fn: listener,
last: initWatchVal,
get: get,
exp: watchExp,
eq: !!objectEquality
};
// in the case user pass string, we need to compile it, do we really need this ?
if (!isFunction(listener)) {
var listenFn = compileToFn(listener || noop, 'listener');
watcher.fn = function(newVal, oldVal, scope) {listenFn(scope);};
}
if (typeof watchExp == 'string' && get.constant) {
var originalFn = watcher.fn;
watcher.fn = function(newVal, oldVal, scope) {
originalFn.call(this, newVal, oldVal, scope);
arrayRemove(array, watcher);
};
}
if (!array) {
array = scope.$$watchers = [];
}
// we use unshift since we use a while loop in $digest for speed.
// the while loop reads in reverse order.
array.unshift(watcher);
return function() {
arrayRemove(array, watcher);
};
},
/**
* @ngdoc function
* @name ng.$rootScope.Scope#$watchCollection
* @methodOf ng.$rootScope.Scope
* @function
*
* @description
* Shallow watches the properties of an object and fires whenever any of the properties change
* (for arrays this implies watching the array items, for object maps this implies watching the properties).
* If a change is detected the `listener` callback is fired.
*
* - The `obj` collection is observed via standard $watch operation and is examined on every call to $digest() to
* see if any items have been added, removed, or moved.
* - The `listener` is called whenever anything within the `obj` has changed. Examples include adding new items
* into the object or array, removing and moving items around.
*
*
* # Example
* <pre>
$scope.names = ['igor', 'matias', 'misko', 'james'];
$scope.dataCount = 4;
$scope.$watchCollection('names', function(newNames, oldNames) {
$scope.dataCount = newNames.length;
});
expect($scope.dataCount).toEqual(4);
$scope.$digest();
//still at 4 ... no changes
expect($scope.dataCount).toEqual(4);
$scope.names.pop();
$scope.$digest();
//now there's been a change
expect($scope.dataCount).toEqual(3);
* </pre>
*
*
* @param {string|Function(scope)} obj Evaluated as {@link guide/expression expression}. The expression value
* should evaluate to an object or an array which is observed on each
* {@link ng.$rootScope.Scope#$digest $digest} cycle. Any shallow change within the collection will trigger
* a call to the `listener`.
*
* @param {function(newCollection, oldCollection, scope)} listener a callback function that is fired with both
* the `newCollection` and `oldCollection` as parameters.
* The `newCollection` object is the newly modified data obtained from the `obj` expression and the
* `oldCollection` object is a copy of the former collection data.
* The `scope` refers to the current scope.
*
* @returns {function()} Returns a de-registration function for this listener. When the de-registration function is executed
* then the internal watch operation is terminated.
*/
$watchCollection: function(obj, listener) {
var self = this;
var oldValue;
var newValue;
var changeDetected = 0;
var objGetter = $parse(obj);
var internalArray = [];
var internalObject = {};
var oldLength = 0;
function $watchCollectionWatch() {
newValue = objGetter(self);
var newLength, key;
if (!isObject(newValue)) {
if (oldValue !== newValue) {
oldValue = newValue;
changeDetected++;
}
} else if (isArrayLike(newValue)) {
if (oldValue !== internalArray) {
// we are transitioning from something which was not an array into array.
oldValue = internalArray;
oldLength = oldValue.length = 0;
changeDetected++;
}
newLength = newValue.length;
if (oldLength !== newLength) {
// if lengths do not match we need to trigger change notification
changeDetected++;
oldValue.length = oldLength = newLength;
}
// copy the items to oldValue and look for changes.
for (var i = 0; i < newLength; i++) {
if (oldValue[i] !== newValue[i]) {
changeDetected++;
oldValue[i] = newValue[i];
}
}
} else {
if (oldValue !== internalObject) {
// we are transitioning from something which was not an object into object.
oldValue = internalObject = {};
oldLength = 0;
changeDetected++;
}
// copy the items to oldValue and look for changes.
newLength = 0;
for (key in newValue) {
if (newValue.hasOwnProperty(key)) {
newLength++;
if (oldValue.hasOwnProperty(key)) {
if (oldValue[key] !== newValue[key]) {
changeDetected++;
oldValue[key] = newValue[key];
}
} else {
oldLength++;
oldValue[key] = newValue[key];
changeDetected++;
}
}
}
if (oldLength > newLength) {
// we used to have more keys, need to find them and destroy them.
changeDetected++;
for(key in oldValue) {
if (oldValue.hasOwnProperty(key) && !newValue.hasOwnProperty(key)) {
oldLength--;
delete oldValue[key];
}
}
}
}
return changeDetected;
}
function $watchCollectionAction() {
listener(newValue, oldValue, self);
}
return this.$watch($watchCollectionWatch, $watchCollectionAction);
},
/**
* @ngdoc function
* @name ng.$rootScope.Scope#$digest
* @methodOf ng.$rootScope.Scope
* @function
*
* @description
* Processes all of the {@link ng.$rootScope.Scope#$watch watchers} of the current scope and its children.
* Because a {@link ng.$rootScope.Scope#$watch watcher}'s listener can change the model, the
* `$digest()` keeps calling the {@link ng.$rootScope.Scope#$watch watchers} until no more listeners are
* firing. This means that it is possible to get into an infinite loop. This function will throw
* `'Maximum iteration limit exceeded.'` if the number of iterations exceeds 10.
*
* Usually you don't call `$digest()` directly in
* {@link ng.directive:ngController controllers} or in
* {@link ng.$compileProvider#directive directives}.
* Instead a call to {@link ng.$rootScope.Scope#$apply $apply()} (typically from within a
* {@link ng.$compileProvider#directive directives}) will force a `$digest()`.
*
* If you want to be notified whenever `$digest()` is called,
* you can register a `watchExpression` function with {@link ng.$rootScope.Scope#$watch $watch()}
* with no `listener`.
*
* You may have a need to call `$digest()` from within unit-tests, to simulate the scope
* life-cycle.
*
* # Example
* <pre>
var scope = ...;
scope.name = 'misko';
scope.counter = 0;
expect(scope.counter).toEqual(0);
scope.$watch('name', function(newValue, oldValue) {
scope.counter = scope.counter + 1;
});
expect(scope.counter).toEqual(0);
scope.$digest();
// no variable change
expect(scope.counter).toEqual(0);
scope.name = 'adam';
scope.$digest();
expect(scope.counter).toEqual(1);
* </pre>
*
*/
$digest: function() {
var watch, value, last,
watchers,
asyncQueue = this.$$asyncQueue,
length,
dirty, ttl = TTL,
next, current, target = this,
watchLog = [],
logIdx, logMsg;
beginPhase('$digest');
do { // "while dirty" loop
dirty = false;
current = target;
while(asyncQueue.length) {
try {
current.$eval(asyncQueue.shift());
} catch (e) {
$exceptionHandler(e);
}
}
do { // "traverse the scopes" loop
if ((watchers = current.$$watchers)) {
// process our watches
length = watchers.length;
while (length--) {
try {
watch = watchers[length];
// Most common watches are on primitives, in which case we can short
// circuit it with === operator, only when === fails do we use .equals
if (watch && (value = watch.get(current)) !== (last = watch.last) &&
!(watch.eq
? equals(value, last)
: (typeof value == 'number' && typeof last == 'number'
&& isNaN(value) && isNaN(last)))) {
dirty = true;
watch.last = watch.eq ? copy(value) : value;
watch.fn(value, ((last === initWatchVal) ? value : last), current);
if (ttl < 5) {
logIdx = 4 - ttl;
if (!watchLog[logIdx]) watchLog[logIdx] = [];
logMsg = (isFunction(watch.exp))
? 'fn: ' + (watch.exp.name || watch.exp.toString())
: watch.exp;
logMsg += '; newVal: ' + toJson(value) + '; oldVal: ' + toJson(last);
watchLog[logIdx].push(logMsg);
}
}
} catch (e) {
$exceptionHandler(e);
}
}
}
// Insanity Warning: scope depth-first traversal
// yes, this code is a bit crazy, but it works and we have tests to prove it!
// this piece should be kept in sync with the traversal in $broadcast
if (!(next = (current.$$childHead || (current !== target && current.$$nextSibling)))) {
while(current !== target && !(next = current.$$nextSibling)) {
current = current.$parent;
}
}
} while ((current = next));
if(dirty && !(ttl--)) {
clearPhase();
throw $rootScopeMinErr('infdig',
'{0} $digest() iterations reached. Aborting!\nWatchers fired in the last 5 iterations: {1}',
TTL, toJson(watchLog));
}
} while (dirty || asyncQueue.length);
clearPhase();
},
/**
* @ngdoc event
* @name ng.$rootScope.Scope#$destroy
* @eventOf ng.$rootScope.Scope
* @eventType broadcast on scope being destroyed
*
* @description
* Broadcasted when a scope and its children are being destroyed.
*
* Note that, in AngularJS, there is also a `$destroy` jQuery event, which can be used to
* clean up DOM bindings before an element is removed from the DOM.
*/
/**
* @ngdoc function
* @name ng.$rootScope.Scope#$destroy
* @methodOf ng.$rootScope.Scope
* @function
*
* @description
* Removes the current scope (and all of its children) from the parent scope. Removal implies
* that calls to {@link ng.$rootScope.Scope#$digest $digest()} will no longer
* propagate to the current scope and its children. Removal also implies that the current
* scope is eligible for garbage collection.
*
* The `$destroy()` is usually used by directives such as
* {@link ng.directive:ngRepeat ngRepeat} for managing the
* unrolling of the loop.
*
* Just before a scope is destroyed a `$destroy` event is broadcasted on this scope.
* Application code can register a `$destroy` event handler that will give it chance to
* perform any necessary cleanup.
*
* Note that, in AngularJS, there is also a `$destroy` jQuery event, which can be used to
* clean up DOM bindings before an element is removed from the DOM.
*/
$destroy: function() {
// we can't destroy the root scope or a scope that has been already destroyed
if ($rootScope == this || this.$$destroyed) return;
var parent = this.$parent;
this.$broadcast('$destroy');
this.$$destroyed = true;
if (parent.$$childHead == this) parent.$$childHead = this.$$nextSibling;
if (parent.$$childTail == this) parent.$$childTail = this.$$prevSibling;
if (this.$$prevSibling) this.$$prevSibling.$$nextSibling = this.$$nextSibling;
if (this.$$nextSibling) this.$$nextSibling.$$prevSibling = this.$$prevSibling;
// This is bogus code that works around Chrome's GC leak
// see: https://github.com/angular/angular.js/issues/1313#issuecomment-10378451
this.$parent = this.$$nextSibling = this.$$prevSibling = this.$$childHead =
this.$$childTail = null;
},
/**
* @ngdoc function
* @name ng.$rootScope.Scope#$eval
* @methodOf ng.$rootScope.Scope
* @function
*
* @description
* Executes the `expression` on the current scope returning the result. Any exceptions in the
* expression are propagated (uncaught). This is useful when evaluating Angular expressions.
*
* # Example
* <pre>
var scope = ng.$rootScope.Scope();
scope.a = 1;
scope.b = 2;
expect(scope.$eval('a+b')).toEqual(3);
expect(scope.$eval(function(scope){ return scope.a + scope.b; })).toEqual(3);
* </pre>
*
* @param {(string|function())=} expression An angular expression to be executed.
*
* - `string`: execute using the rules as defined in {@link guide/expression expression}.
* - `function(scope)`: execute the function with the current `scope` parameter.
*
* @returns {*} The result of evaluating the expression.
*/
$eval: function(expr, locals) {
return $parse(expr)(this, locals);
},
/**
* @ngdoc function
* @name ng.$rootScope.Scope#$evalAsync
* @methodOf ng.$rootScope.Scope
* @function
*
* @description
* Executes the expression on the current scope at a later point in time.
*
* The `$evalAsync` makes no guarantees as to when the `expression` will be executed, only that:
*
* - it will execute in the current script execution context (before any DOM rendering).
* - at least one {@link ng.$rootScope.Scope#$digest $digest cycle} will be performed after
* `expression` execution.
*
* Any exceptions from the execution of the expression are forwarded to the
* {@link ng.$exceptionHandler $exceptionHandler} service.
*
* @param {(string|function())=} expression An angular expression to be executed.
*
* - `string`: execute using the rules as defined in {@link guide/expression expression}.
* - `function(scope)`: execute the function with the current `scope` parameter.
*
*/
$evalAsync: function(expr) {
this.$$asyncQueue.push(expr);
},
/**
* @ngdoc function
* @name ng.$rootScope.Scope#$apply
* @methodOf ng.$rootScope.Scope
* @function
*
* @description
* `$apply()` is used to execute an expression in angular from outside of the angular framework.
* (For example from browser DOM events, setTimeout, XHR or third party libraries).
* Because we are calling into the angular framework we need to perform proper scope life-cycle
* of {@link ng.$exceptionHandler exception handling},
* {@link ng.$rootScope.Scope#$digest executing watches}.
*
* ## Life cycle
*
* # Pseudo-Code of `$apply()`
* <pre>
function $apply(expr) {
try {
return $eval(expr);
} catch (e) {
$exceptionHandler(e);
} finally {
$root.$digest();
}
}
* </pre>
*
*
* Scope's `$apply()` method transitions through the following stages:
*
* 1. The {@link guide/expression expression} is executed using the
* {@link ng.$rootScope.Scope#$eval $eval()} method.
* 2. Any exceptions from the execution of the expression are forwarded to the
* {@link ng.$exceptionHandler $exceptionHandler} service.
* 3. The {@link ng.$rootScope.Scope#$watch watch} listeners are fired immediately after the expression
* was executed using the {@link ng.$rootScope.Scope#$digest $digest()} method.
*
*
* @param {(string|function())=} exp An angular expression to be executed.
*
* - `string`: execute using the rules as defined in {@link guide/expression expression}.
* - `function(scope)`: execute the function with current `scope` parameter.
*
* @returns {*} The result of evaluating the expression.
*/
$apply: function(expr) {
try {
beginPhase('$apply');
return this.$eval(expr);
} catch (e) {
$exceptionHandler(e);
} finally {
clearPhase();
try {
$rootScope.$digest();
} catch (e) {
$exceptionHandler(e);
throw e;
}
}
},
/**
* @ngdoc function
* @name ng.$rootScope.Scope#$on
* @methodOf ng.$rootScope.Scope
* @function
*
* @description
* Listens on events of a given type. See {@link ng.$rootScope.Scope#$emit $emit} for discussion of
* event life cycle.
*
* The event listener function format is: `function(event, args...)`. The `event` object
* passed into the listener has the following attributes:
*
* - `targetScope` - `{Scope}`: the scope on which the event was `$emit`-ed or `$broadcast`-ed.
* - `currentScope` - `{Scope}`: the current scope which is handling the event.
* - `name` - `{string}`: Name of the event.
* - `stopPropagation` - `{function=}`: calling `stopPropagation` function will cancel further event
* propagation (available only for events that were `$emit`-ed).
* - `preventDefault` - `{function}`: calling `preventDefault` sets `defaultPrevented` flag to true.
* - `defaultPrevented` - `{boolean}`: true if `preventDefault` was called.
*
* @param {string} name Event name to listen on.
* @param {function(event, args...)} listener Function to call when the event is emitted.
* @returns {function()} Returns a deregistration function for this listener.
*/
$on: function(name, listener) {
var namedListeners = this.$$listeners[name];
if (!namedListeners) {
this.$$listeners[name] = namedListeners = [];
}
namedListeners.push(listener);
return function() {
namedListeners[indexOf(namedListeners, listener)] = null;
};
},
/**
* @ngdoc function
* @name ng.$rootScope.Scope#$emit
* @methodOf ng.$rootScope.Scope
* @function
*
* @description
* Dispatches an event `name` upwards through the scope hierarchy notifying the
* registered {@link ng.$rootScope.Scope#$on} listeners.
*
* The event life cycle starts at the scope on which `$emit` was called. All
* {@link ng.$rootScope.Scope#$on listeners} listening for `name` event on this scope get notified.
* Afterwards, the event traverses upwards toward the root scope and calls all registered
* listeners along the way. The event will stop propagating if one of the listeners cancels it.
*
* Any exception emitted from the {@link ng.$rootScope.Scope#$on listeners} will be passed
* onto the {@link ng.$exceptionHandler $exceptionHandler} service.
*
* @param {string} name Event name to emit.
* @param {...*} args Optional set of arguments which will be passed onto the event listeners.
* @return {Object} Event object, see {@link ng.$rootScope.Scope#$on}
*/
$emit: function(name, args) {
var empty = [],
namedListeners,
scope = this,
stopPropagation = false,
event = {
name: name,
targetScope: scope,
stopPropagation: function() {stopPropagation = true;},
preventDefault: function() {
event.defaultPrevented = true;
},
defaultPrevented: false
},
listenerArgs = concat([event], arguments, 1),
i, length;
do {
namedListeners = scope.$$listeners[name] || empty;
event.currentScope = scope;
for (i=0, length=namedListeners.length; i<length; i++) {
// if listeners were deregistered, defragment the array
if (!namedListeners[i]) {
namedListeners.splice(i, 1);
i--;
length--;
continue;
}
try {
namedListeners[i].apply(null, listenerArgs);
if (stopPropagation) return event;
} catch (e) {
$exceptionHandler(e);
}
}
//traverse upwards
scope = scope.$parent;
} while (scope);
return event;
},
/**
* @ngdoc function
* @name ng.$rootScope.Scope#$broadcast
* @methodOf ng.$rootScope.Scope
* @function
*
* @description
* Dispatches an event `name` downwards to all child scopes (and their children) notifying the
* registered {@link ng.$rootScope.Scope#$on} listeners.
*
* The event life cycle starts at the scope on which `$broadcast` was called. All
* {@link ng.$rootScope.Scope#$on listeners} listening for `name` event on this scope get notified.
* Afterwards, the event propagates to all direct and indirect scopes of the current scope and
* calls all registered listeners along the way. The event cannot be canceled.
*
* Any exception emitted from the {@link ng.$rootScope.Scope#$on listeners} will be passed
* onto the {@link ng.$exceptionHandler $exceptionHandler} service.
*
* @param {string} name Event name to broadcast.
* @param {...*} args Optional set of arguments which will be passed onto the event listeners.
* @return {Object} Event object, see {@link ng.$rootScope.Scope#$on}
*/
$broadcast: function(name, args) {
var target = this,
current = target,
next = target,
event = {
name: name,
targetScope: target,
preventDefault: function() {
event.defaultPrevented = true;
},
defaultPrevented: false
},
listenerArgs = concat([event], arguments, 1),
listeners, i, length;
//down while you can, then up and next sibling or up and next sibling until back at root
do {
current = next;
event.currentScope = current;
listeners = current.$$listeners[name] || [];
for (i=0, length = listeners.length; i<length; i++) {
// if listeners were deregistered, defragment the array
if (!listeners[i]) {
listeners.splice(i, 1);
i--;
length--;
continue;
}
try {
listeners[i].apply(null, listenerArgs);
} catch(e) {
$exceptionHandler(e);
}
}
// Insanity Warning: scope depth-first traversal
// yes, this code is a bit crazy, but it works and we have tests to prove it!
// this piece should be kept in sync with the traversal in $digest
if (!(next = (current.$$childHead || (current !== target && current.$$nextSibling)))) {
while(current !== target && !(next = current.$$nextSibling)) {
current = current.$parent;
}
}
} while ((current = next));
return event;
}
};
var $rootScope = new Scope();
return $rootScope;
function beginPhase(phase) {
if ($rootScope.$$phase) {
throw $rootScopeMinErr('inprog', '{0} already in progress', $rootScope.$$phase);
}
$rootScope.$$phase = phase;
}
function clearPhase() {
$rootScope.$$phase = null;
}
function compileToFn(exp, name) {
var fn = $parse(exp);
assertArgFn(fn, name);
return fn;
}
/**
* function used as an initial value for watchers.
* because it's unique we can easily tell it apart from other values
*/
function initWatchVal() {}
}];
}
var $sceMinErr = minErr('$sce');
var SCE_CONTEXTS = {
HTML: 'html',
CSS: 'css',
URL: 'url',
// RESOURCE_URL is a subtype of URL used in contexts where a privileged resource is sourced from a
// url. (e.g. ng-include, script src, templateUrl)
RESOURCE_URL: 'resourceUrl',
JS: 'js'
};
/**
* @ngdoc service
* @name ng.$sceDelegate
* @function
*
* @description
*
* `$sceDelegate` is a service that is used by the `$sce` service to provide {@link ng.$sce Strict
* Contextual Escaping (SCE)} services to AngularJS.
*
* Typically, you would configure or override the {@link ng.$sceDelegate $sceDelegate} instead of
* the `$sce` service to customize the way Strict Contextual Escaping works in AngularJS. This is
* because, while the `$sce` provides numerous shorthand methods, etc., you really only need to
* override 3 core functions (`trustAs`, `getTrusted` and `valueOf`) to replace the way things
* work because `$sce` delegates to `$sceDelegate` for these operations.
*
* Refer {@link ng.$sceDelegateProvider $sceDelegateProvider} to configure this service.
*
* The default instance of `$sceDelegate` should work out of the box with little pain. While you
* can override it completely to change the behavior of `$sce`, the common case would
* involve configuring the {@link ng.$sceDelegateProvider $sceDelegateProvider} instead by setting
* your own whitelists and blacklists for trusting URLs used for loading AngularJS resources such as
* templates. Refer {@link ng.$sceDelegateProvider#resourceUrlWhitelist
* $sceDelegateProvider.resourceUrlWhitelist} and {@link
* ng.$sceDelegateProvider#resourceUrlBlacklist $sceDelegateProvider.resourceUrlBlacklist}
*/
/**
* @ngdoc object
* @name ng.$sceDelegateProvider
* @description
*
* The $sceDelegateProvider provider allows developers to configure the {@link ng.$sceDelegate
* $sceDelegate} service. This allows one to get/set the whitelists and blacklists used to ensure
* that URLs used for sourcing Angular templates are safe. Refer {@link
* ng.$sceDelegateProvider#resourceUrlWhitelist $sceDelegateProvider.resourceUrlWhitelist} and
* {@link ng.$sceDelegateProvider#resourceUrlBlacklist $sceDelegateProvider.resourceUrlBlacklist}
*
* Read more about {@link ng.$sce Strict Contextual Escaping (SCE)}.
*/
function $SceDelegateProvider() {
this.SCE_CONTEXTS = SCE_CONTEXTS;
// Resource URLs can also be trusted by policy.
var resourceUrlWhitelist = ['self'],
resourceUrlBlacklist = [];
/**
* @ngdoc function
* @name ng.sceDelegateProvider#resourceUrlWhitelist
* @methodOf ng.$sceDelegateProvider
* @function
*
* @param {Array=} whitelist When provided, replaces the resourceUrlWhitelist with the value
* provided. This must be an array.
*
* Each element of this array must either be a regex or the special string `'self'`.
*
* When a regex is used, it is matched against the normalized / absolute URL of the resource
* being tested.
*
* The **special string** `'self'` can be used to match against all URLs of the same domain as the
* application document with the same protocol (allows sourcing https resources from http documents.)
*
* Please note that **an empty whitelist array will block all URLs**!
*
* @return {Array} the currently set whitelist array.
*
* The **default value** when no whitelist has been explicitly set is `['self']`.
*
* @description
* Sets/Gets the whitelist of trusted resource URLs.
*/
this.resourceUrlWhitelist = function (value) {
if (arguments.length) {
resourceUrlWhitelist = value;
}
return resourceUrlWhitelist;
};
/**
* @ngdoc function
* @name ng.sceDelegateProvider#resourceUrlBlacklist
* @methodOf ng.$sceDelegateProvider
* @function
*
* @param {Array=} blacklist When provided, replaces the resourceUrlBlacklist with the value
* provided. This must be an array.
*
* Each element of this array must either be a regex or the special string `'self'` (see
* `resourceUrlWhitelist` for meaning - it's only really useful there.)
*
* When a regex is used, it is matched against the normalized / absolute URL of the resource
* being tested.
*
* The typical usage for the blacklist is to **block [open redirects](http://cwe.mitre.org/data/definitions/601.html)**
* served by your domain as these would otherwise be trusted but actually return content from the redirected
* domain.
*
* Finally, **the blacklist overrides the whitelist** and has the final say.
*
* @return {Array} the currently set blacklist array.
*
* The **default value** when no whitelist has been explicitly set is the empty array (i.e. there is
* no blacklist.)
*
* @description
* Sets/Gets the blacklist of trusted resource URLs.
*/
this.resourceUrlBlacklist = function (value) {
if (arguments.length) {
resourceUrlBlacklist = value;
}
return resourceUrlBlacklist;
};
// Helper functions for matching resource urls by policy.
function isCompatibleProtocol(documentProtocol, resourceProtocol) {
return ((documentProtocol === resourceProtocol) ||
(documentProtocol === "http:" && resourceProtocol === "https:"));
}
this.$get = ['$log', '$document', '$injector', '$$urlUtils', function(
$log, $document, $injector, $$urlUtils) {
var htmlSanitizer = function htmlSanitizer(html) {
throw $sceMinErr('unsafe', 'Attempting to use an unsafe value in a safe context.');
};
if ($injector.has('$sanitize')) {
htmlSanitizer = $injector.get('$sanitize');
}
function matchUrl(matcher, parsedUrl) {
if (matcher === 'self') {
return $$urlUtils.isSameOrigin(parsedUrl);
} else {
return !!parsedUrl.href.match(matcher);
}
}
function isResourceUrlAllowedByPolicy(url) {
var parsedUrl = $$urlUtils.resolve(url.toString(), true);
var i, n, allowed = false;
// Ensure that at least one item from the whitelist allows this url.
for (i = 0, n = resourceUrlWhitelist.length; i < n; i++) {
if (matchUrl(resourceUrlWhitelist[i], parsedUrl)) {
allowed = true;
break;
}
}
if (allowed) {
// Ensure that no item from the blacklist blocked this url.
for (i = 0, n = resourceUrlBlacklist.length; i < n; i++) {
if (matchUrl(resourceUrlBlacklist[i], parsedUrl)) {
allowed = false;
break;
}
}
}
return allowed;
}
function generateHolderType(base) {
var holderType = function TrustedValueHolderType(trustedValue) {
this.$$unwrapTrustedValue = function() {
return trustedValue;
};
};
if (base) {
holderType.prototype = new base();
}
holderType.prototype.valueOf = function sceValueOf() {
return this.$$unwrapTrustedValue();
}
holderType.prototype.toString = function sceToString() {
return this.$$unwrapTrustedValue().toString();
}
return holderType;
}
var trustedValueHolderBase = generateHolderType(),
byType = {};
byType[SCE_CONTEXTS.HTML] = generateHolderType(trustedValueHolderBase);
byType[SCE_CONTEXTS.CSS] = generateHolderType(trustedValueHolderBase);
byType[SCE_CONTEXTS.URL] = generateHolderType(trustedValueHolderBase);
byType[SCE_CONTEXTS.JS] = generateHolderType(trustedValueHolderBase);
byType[SCE_CONTEXTS.RESOURCE_URL] = generateHolderType(byType[SCE_CONTEXTS.URL]);
/**
* @ngdoc method
* @name ng.$sceDelegate#trustAs
* @methodOf ng.$sceDelegate
*
* @description
* Returns an object that is trusted by angular for use in specified strict
* contextual escaping contexts (such as ng-html-bind-unsafe, ng-include, any src
* attribute interpolation, any dom event binding attribute interpolation
* such as for onclick, etc.) that uses the provided value.
* See {@link ng.$sce $sce} for enabling strict contextual escaping.
*
* @param {string} type The kind of context in which this value is safe for use. e.g. url,
* resourceUrl, html, js and css.
* @param {*} value The value that that should be considered trusted/safe.
* @returns {*} A value that can be used to stand in for the provided `value` in places
* where Angular expects a $sce.trustAs() return value.
*/
function trustAs(type, trustedValue) {
var constructor = (byType.hasOwnProperty(type) ? byType[type] : null);
if (!constructor) {
throw $sceMinErr('icontext', 'Attempted to trust a value in invalid context. Context: {0}; Value: {1}',
type, trustedValue);
}
if (trustedValue === null || trustedValue === undefined || trustedValue === '') {
return trustedValue;
}
// All the current contexts in SCE_CONTEXTS happen to be strings. In order to avoid trusting
// mutable objects, we ensure here that the value passed in is actually a string.
if (typeof trustedValue !== 'string') {
throw $sceMinErr('itype',
'Attempted to trust a non-string value in a content requiring a string: Context: {0}',
type);
}
return new constructor(trustedValue);
}
/**
* @ngdoc method
* @name ng.$sceDelegate#valueOf
* @methodOf ng.$sceDelegate
*
* @description
* If the passed parameter had been returned by a prior call to {@link ng.$sceDelegate#trustAs
* `$sceDelegate.trustAs`}, returns the value that had been passed to {@link
* ng.$sceDelegate#trustAs `$sceDelegate.trustAs`}.
*
* If the passed parameter is not a value that had been returned by {@link
* ng.$sceDelegate#trustAs `$sceDelegate.trustAs`}, returns it as-is.
*
* @param {*} value The result of a prior {@link ng.$sceDelegate#trustAs `$sceDelegate.trustAs`}
* call or anything else.
* @returns {*} The value the was originally provided to {@link ng.$sceDelegate#trustAs
* `$sceDelegate.trustAs`} if `value` is the result of such a call. Otherwise, returns `value`
* unchanged.
*/
function valueOf(maybeTrusted) {
if (maybeTrusted instanceof trustedValueHolderBase) {
return maybeTrusted.$$unwrapTrustedValue();
} else {
return maybeTrusted;
}
}
/**
* @ngdoc method
* @name ng.$sceDelegate#getTrusted
* @methodOf ng.$sceDelegate
*
* @description
* Takes the result of a {@link ng.$sceDelegate#trustAs `$sceDelegate.trustAs`} call and returns the
* originally supplied value if the queried context type is a supertype of the created type. If
* this condition isn't satisfied, throws an exception.
*
* @param {string} type The kind of context in which this value is to be used.
* @param {*} maybeTrusted The result of a prior {@link ng.$sceDelegate#trustAs
* `$sceDelegate.trustAs`} call.
* @returns {*} The value the was originally provided to {@link ng.$sceDelegate#trustAs
* `$sceDelegate.trustAs`} if valid in this context. Otherwise, throws an exception.
*/
function getTrusted(type, maybeTrusted) {
if (maybeTrusted === null || maybeTrusted === undefined || maybeTrusted === '') {
return maybeTrusted;
}
var constructor = (byType.hasOwnProperty(type) ? byType[type] : null);
if (constructor && maybeTrusted instanceof constructor) {
return maybeTrusted.$$unwrapTrustedValue();
}
// If we get here, then we may only take one of two actions.
// 1. sanitize the value for the requested type, or
// 2. throw an exception.
if (type === SCE_CONTEXTS.RESOURCE_URL) {
if (isResourceUrlAllowedByPolicy(maybeTrusted)) {
return maybeTrusted;
} else {
throw $sceMinErr('insecurl',
'Blocked loading resource from url not allowed by $sceDelegate policy. URL: {0}', maybeTrusted.toString());
}
} else if (type === SCE_CONTEXTS.HTML) {
return htmlSanitizer(maybeTrusted);
}
throw $sceMinErr('unsafe', 'Attempting to use an unsafe value in a safe context.');
}
return { trustAs: trustAs,
getTrusted: getTrusted,
valueOf: valueOf };
}];
}
/**
* @ngdoc object
* @name ng.$sceProvider
* @description
*
* The $sceProvider provider allows developers to configure the {@link ng.$sce $sce} service.
* - enable/disable Strict Contextual Escaping (SCE) in a module
* - override the default implementation with a custom delegate
*
* Read more about {@link ng.$sce Strict Contextual Escaping (SCE)}.
*/
/**
* @ngdoc service
* @name ng.$sce
* @function
*
* @description
*
* `$sce` is a service that provides Strict Contextual Escaping services to AngularJS.
*
* # Strict Contextual Escaping
*
* Strict Contextual Escaping (SCE) is a mode in which AngularJS requires bindings in certain
* contexts to result in a value that is marked as safe to use for that context One example of such
* a context is binding arbitrary html controlled by the user via `ng-bind-html`. We refer to these
* contexts as privileged or SCE contexts.
*
* As of version 1.2, Angular ships with SCE enabled by default.
*
* Note: When enabled (the default), IE8 in quirks mode is not supported. In this mode, IE8 allows
* one to execute arbitrary javascript by the use of the expression() syntax. Refer
* <http://blogs.msdn.com/b/ie/archive/2008/10/16/ending-expressions.aspx> to learn more about them.
* You can ensure your document is in standards mode and not quirks mode by adding `<!doctype html>`
* to the top of your HTML document.
*
* SCE assists in writing code in way that (a) is secure by default and (b) makes auditing for
* security vulnerabilities such as XSS, clickjacking, etc. a lot easier.
*
* Here's an example of a binding in a privileged context:
*
* <pre class="prettyprint">
* <input ng-model="userHtml">
* <div ng-bind-html="{{userHtml}}">
* </pre>
*
* Notice that `ng-bind-html` is bound to `{{userHtml}}` controlled by the user. With SCE
* disabled, this application allows the user to render arbitrary HTML into the DIV.
* In a more realistic example, one may be rendering user comments, blog articles, etc. via
* bindings. (HTML is just one example of a context where rendering user controlled input creates
* security vulnerabilities.)
*
* For the case of HTML, you might use a library, either on the client side, or on the server side,
* to sanitize unsafe HTML before binding to the value and rendering it in the document.
*
* How would you ensure that every place that used these types of bindings was bound to a value that
* was sanitized by your library (or returned as safe for rendering by your server?) How can you
* ensure that you didn't accidentally delete the line that sanitized the value, or renamed some
* properties/fields and forgot to update the binding to the sanitized value?
*
* To be secure by default, you want to ensure that any such bindings are disallowed unless you can
* determine that something explicitly says it's safe to use a value for binding in that
* context. You can then audit your code (a simple grep would do) to ensure that this is only done
* for those values that you can easily tell are safe - because they were received from your server,
* sanitized by your library, etc. You can organize your codebase to help with this - perhaps
* allowing only the files in a specific directory to do this. Ensuring that the internal API
* exposed by that code doesn't markup arbitrary values as safe then becomes a more manageable task.
*
* In the case of AngularJS' SCE service, one uses {@link ng.$sce#trustAs $sce.trustAs} (and shorthand
* methods such as {@link ng.$sce#trustAsHtml $sce.trustAsHtml}, etc.) to obtain values that will be
* accepted by SCE / privileged contexts.
*
*
* ## How does it work?
*
* In privileged contexts, directives and code will bind to the result of {@link ng.$sce#getTrusted
* $sce.getTrusted(context, value)} rather than to the value directly. Directives use {@link
* ng.$sce#parse $sce.parseAs} rather than `$parse` to watch attribute bindings, which performs the
* {@link ng.$sce#getTrusted $sce.getTrusted} behind the scenes on non-constant literals.
*
* As an example, {@link ng.directive:ngBindHtml ngBindHtml} uses {@link
* ng.$sce#parseHtml $sce.parseAsHtml(binding expression)}. Here's the actual code (slightly
* simplified):
*
* <pre class="prettyprint">
* var ngBindHtmlDirective = ['$sce', function($sce) {
* return function(scope, element, attr) {
* scope.$watch($sce.parseAsHtml(attr.ngBindHtml), function(value) {
* element.html(value || '');
* });
* };
* }];
* </pre>
*
* ## Impact on loading templates
*
* This applies both to the {@link ng.directive:ngInclude `ng-include`} directive as well as
* `templateUrl`'s specified by {@link guide/directive directives}.
*
* By default, Angular only loads templates from the same domain and protocol as the application
* document. This is done by calling {@link ng.$sce#getTrustedResourceUrl
* $sce.getTrustedResourceUrl} on the template URL. To load templates from other domains and/or
* protocols, you may either either {@link ng.$sceDelegateProvider#resourceUrlWhitelist whitelist
* them} or {@link ng.$sce#trustAsResourceUrl wrap it} into a trusted value.
*
* *Please note*:
* The browser's
* {@link https://code.google.com/p/browsersec/wiki/Part2#Same-origin_policy_for_XMLHttpRequest
* Same Origin Policy} and {@link http://www.w3.org/TR/cors/ Cross-Origin Resource Sharing (CORS)}
* policy apply in addition to this and may further restrict whether the template is successfully
* loaded. This means that without the right CORS policy, loading templates from a different domain
* won't work on all browsers. Also, loading templates from `file://` URL does not work on some
* browsers.
*
* ## This feels like too much overhead for the developer?
*
* It's important to remember that SCE only applies to interpolation expressions.
*
* If your expressions are constant literals, they're automatically trusted and you don't need to
* call `$sce.trustAs` on them. (e.g.
* `<div ng-html-bind-unsafe="'<b>implicitly trusted</b>'"></div>`) just works.
*
* Additionally, `a[href]` and `img[src]` automatically sanitize their URLs and do not pass them
* through {@link ng.$sce#getTrusted $sce.getTrusted}. SCE doesn't play a role here.
*
* The included {@link ng.$sceDelegate $sceDelegate} comes with sane defaults to allow you to load
* templates in `ng-include` from your application's domain without having to even know about SCE.
* It blocks loading templates from other domains or loading templates over http from an https
* served document. You can change these by setting your own custom {@link
* ng.$sceDelegateProvider#resourceUrlWhitelist whitelists} and {@link
* ng.$sceDelegateProvider#resourceUrlBlacklist blacklists} for matching such URLs.
*
* This significantly reduces the overhead. It is far easier to pay the small overhead and have an
* application that's secure and can be audited to verify that with much more ease than bolting
* security onto an application later.
*
* ## What trusted context types are supported?<a name="contexts"></a>
*
* | Context | Notes |
* |=====================|================|
* | `$sce.HTML` | For HTML that's safe to source into the application. The {@link ng.directive:ngBindHtml ngBindHtml} directive uses this context for bindings. |
* | `$sce.CSS` | For CSS that's safe to source into the application. Currently unused. Feel free to use it in your own directives. |
* | `$sce.URL` | For URLs that are safe to follow as links. Currently unused (`<a href=` and `<img src=` sanitize their urls and don't consititute an SCE context. |
* | `$sce.RESOURCE_URL` | For URLs that are not only safe to follow as links, but whose contens are also safe to include in your application. Examples include `ng-include`, `src` / `ngSrc` bindings for tags other than `IMG` (e.g. `IFRAME`, `OBJECT`, etc.) <br><br>Note that `$sce.RESOURCE_URL` makes a stronger statement about the URL than `$sce.URL` does and therefore contexts requiring values trusted for `$sce.RESOURCE_URL` can be used anywhere that values trusted for `$sce.URL` are required. |
* | `$sce.JS` | For JavaScript that is safe to execute in your application's context. Currently unused. Feel free to use it in your own directives. |
*
* ## Show me an example.
*
*
*
* @example
<example module="mySceApp">
<file name="index.html">
<div ng-controller="myAppController as myCtrl">
<i ng-bind-html="myCtrl.explicitlyTrustedHtml" id="explicitlyTrustedHtml"></i><br><br>
<b>User comments</b><br>
By default, HTML that isn't explicitly trusted (e.g. Alice's comment) is sanitized when $sanitize is available. If $sanitize isn't available, this results in an error instead of an exploit.
<div class="well">
<div ng-repeat="userComment in myCtrl.userComments">
<b>{{userComment.name}}</b>:
<span ng-bind-html="userComment.htmlComment" class="htmlComment"></span>
<br>
</div>
</div>
</div>
</file>
<file name="script.js">
var mySceApp = angular.module('mySceApp', ['ngSanitize']);
mySceApp.controller("myAppController", function myAppController($http, $templateCache, $sce) {
var self = this;
$http.get("test_data.json", {cache: $templateCache}).success(function(userComments) {
self.userComments = userComments;
});
self.explicitlyTrustedHtml = $sce.trustAsHtml(
'<span onmouseover="this.textContent="Explicitly trusted HTML bypasses ' +
'sanitization."">Hover over this text.</span>');
});
</file>
<file name="test_data.json">
[
{ "name": "Alice",
"htmlComment": "<span onmouseover='this.textContent=\"PWN3D!\"'>Is <i>anyone</i> reading this?</span>"
},
{ "name": "Bob",
"htmlComment": "<i>Yes!</i> Am I the only other one?"
}
]
</file>
<file name="scenario.js">
describe('SCE doc demo', function() {
it('should sanitize untrusted values', function() {
expect(element('.htmlComment').html()).toBe('<span>Is <i>anyone</i> reading this?</span>');
});
it('should NOT sanitize explicitly trusted values', function() {
expect(element('#explicitlyTrustedHtml').html()).toBe(
'<span onmouseover="this.textContent="Explicitly trusted HTML bypasses ' +
'sanitization."">Hover over this text.</span>');
});
});
</file>
</example>
*
*
*
* ## Can I disable SCE completely?
*
* Yes, you can. However, this is strongly discouraged. SCE gives you a lot of security benefits
* for little coding overhead. It will be much harder to take an SCE disabled application and
* either secure it on your own or enable SCE at a later stage. It might make sense to disable SCE
* for cases where you have a lot of existing code that was written before SCE was introduced and
* you're migrating them a module at a time.
*
* That said, here's how you can completely disable SCE:
*
* <pre class="prettyprint">
* angular.module('myAppWithSceDisabledmyApp', []).config(function($sceProvider) {
* // Completely disable SCE. For demonstration purposes only!
* // Do not use in new projects.
* $sceProvider.enabled(false);
* });
* </pre>
*
*/
function $SceProvider() {
var enabled = true;
/**
* @ngdoc function
* @name ng.sceProvider#enabled
* @methodOf ng.$sceProvider
* @function
*
* @param {boolean=} value If provided, then enables/disables SCE.
* @return {boolean} true if SCE is enabled, false otherwise.
*
* @description
* Enables/disables SCE and returns the current value.
*/
this.enabled = function (value) {
if (arguments.length) {
enabled = !!value;
}
return enabled;
};
/* Design notes on the default implementation for SCE.
*
* The API contract for the SCE delegate
* -------------------------------------
* The SCE delegate object must provide the following 3 methods:
*
* - trustAs(contextEnum, value)
* This method is used to tell the SCE service that the provided value is OK to use in the
* contexts specified by contextEnum. It must return an object that will be accepted by
* getTrusted() for a compatible contextEnum and return this value.
*
* - valueOf(value)
* For values that were not produced by trustAs(), return them as is. For values that were
* produced by trustAs(), return the corresponding input value to trustAs. Basically, if
* trustAs is wrapping the given values into some type, this operation unwraps it when given
* such a value.
*
* - getTrusted(contextEnum, value)
* This function should return the a value that is safe to use in the context specified by
* contextEnum or throw and exception otherwise.
*
* NOTE: This contract deliberately does NOT state that values returned by trustAs() must be opaque
* or wrapped in some holder object. That happens to be an implementation detail. For instance,
* an implementation could maintain a registry of all trusted objects by context. In such a case,
* trustAs() would return the same object that was passed in. getTrusted() would return the same
* object passed in if it was found in the registry under a compatible context or throw an
* exception otherwise. An implementation might only wrap values some of the time based on
* some criteria. getTrusted() might return a value and not throw an exception for special
* constants or objects even if not wrapped. All such implementations fulfill this contract.
*
*
* A note on the inheritance model for SCE contexts
* ------------------------------------------------
* I've used inheritance and made RESOURCE_URL wrapped types a subtype of URL wrapped types. This
* is purely an implementation details.
*
* The contract is simply this:
*
* getTrusted($sce.RESOURCE_URL, value) succeeding implies that getTrusted($sce.URL, value)
* will also succeed.
*
* Inheritance happens to capture this in a natural way. In some future, we
* may not use inheritance anymore. That is OK because no code outside of
* sce.js and sceSpecs.js would need to be aware of this detail.
*/
this.$get = ['$parse', '$document', '$sceDelegate', function(
$parse, $document, $sceDelegate) {
// Prereq: Ensure that we're not running in IE8 quirks mode. In that mode, IE allows
// the "expression(javascript expression)" syntax which is insecure.
if (enabled && msie) {
var documentMode = $document[0].documentMode;
if (documentMode !== undefined && documentMode < 8) {
throw $sceMinErr('iequirks',
'Strict Contextual Escaping does not support Internet Explorer version < 9 in quirks ' +
'mode. You can fix this by adding the text <!doctype html> to the top of your HTML ' +
'document. See http://docs.angularjs.org/api/ng.$sce for more information.');
}
}
var sce = copy(SCE_CONTEXTS);
/**
* @ngdoc function
* @name ng.sce#isEnabled
* @methodOf ng.$sce
* @function
*
* @return {Boolean} true if SCE is enabled, false otherwise. If you want to set the value, you
* have to do it at module config time on {@link ng.$sceProvider $sceProvider}.
*
* @description
* Returns a boolean indicating if SCE is enabled.
*/
sce.isEnabled = function () {
return enabled;
};
sce.trustAs = $sceDelegate.trustAs;
sce.getTrusted = $sceDelegate.getTrusted;
sce.valueOf = $sceDelegate.valueOf;
if (!enabled) {
sce.trustAs = sce.getTrusted = function(type, value) { return value; },
sce.valueOf = identity
}
/**
* @ngdoc method
* @name ng.$sce#parse
* @methodOf ng.$sce
*
* @description
* Converts Angular {@link guide/expression expression} into a function. This is like {@link
* ng.$parse $parse} and is identical when the expression is a literal constant. Otherwise, it
* wraps the expression in a call to {@link ng.$sce#getTrusted $sce.getTrusted(*type*,
* *result*)}
*
* @param {string} type The kind of SCE context in which this result will be used.
* @param {string} expression String expression to compile.
* @returns {function(context, locals)} a function which represents the compiled expression:
*
* * `context` – `{object}` – an object against which any expressions embedded in the strings
* are evaluated against (typically a scope object).
* * `locals` – `{object=}` – local variables context object, useful for overriding values in
* `context`.
*/
sce.parseAs = function sceParseAs(type, expr) {
var parsed = $parse(expr);
if (parsed.literal && parsed.constant) {
return parsed;
} else {
return function sceParseAsTrusted(self, locals) {
return sce.getTrusted(type, parsed(self, locals));
}
}
};
/**
* @ngdoc method
* @name ng.$sce#trustAs
* @methodOf ng.$sce
*
* @description
* Delegates to {@link ng.$sceDelegate#trustAs `$sceDelegate.trustAs`}. As such, returns an object
* that is trusted by angular for use in specified strict contextual escaping contexts (such as
* ng-html-bind-unsafe, ng-include, any src attribute interpolation, any dom event binding
* attribute interpolation such as for onclick, etc.) that uses the provided value. See *
* {@link ng.$sce $sce} for enabling strict contextual escaping.
*
* @param {string} type The kind of context in which this value is safe for use. e.g. url,
* resource_url, html, js and css.
* @param {*} value The value that that should be considered trusted/safe.
* @returns {*} A value that can be used to stand in for the provided `value` in places
* where Angular expects a $sce.trustAs() return value.
*/
/**
* @ngdoc method
* @name ng.$sce#trustAsHtml
* @methodOf ng.$sce
*
* @description
* Shorthand method. `$sce.trustAsHtml(value)` → {@link ng.$sceDelegate#trustAs `$sceDelegate.trustAs($sce.HTML, value)`}
*
* @param {*} value The value to trustAs.
* @returns {*} An object that can be passed to {@link ng.$sce#getTrustedHtml
* $sce.getTrustedHtml(value)} to obtain the original value. (privileged directives
* only accept expressions that are either literal constants or are the
* return value of {@link ng.$sce#trustAs $sce.trustAs}.)
*/
/**
* @ngdoc method
* @name ng.$sce#trustAsUrl
* @methodOf ng.$sce
*
* @description
* Shorthand method. `$sce.trustAsUrl(value)` → {@link ng.$sceDelegate#trustAs `$sceDelegate.trustAs($sce.URL, value)`}
*
* @param {*} value The value to trustAs.
* @returns {*} An object that can be passed to {@link ng.$sce#getTrustedUrl
* $sce.getTrustedUrl(value)} to obtain the original value. (privileged directives
* only accept expressions that are either literal constants or are the
* return value of {@link ng.$sce#trustAs $sce.trustAs}.)
*/
/**
* @ngdoc method
* @name ng.$sce#trustAsResourceUrl
* @methodOf ng.$sce
*
* @description
* Shorthand method. `$sce.trustAsResourceUrl(value)` → {@link ng.$sceDelegate#trustAs `$sceDelegate.trustAs($sce.RESOURCE_URL, value)`}
*
* @param {*} value The value to trustAs.
* @returns {*} An object that can be passed to {@link ng.$sce#getTrustedResourceUrl
* $sce.getTrustedResourceUrl(value)} to obtain the original value. (privileged directives
* only accept expressions that are either literal constants or are the return
* value of {@link ng.$sce#trustAs $sce.trustAs}.)
*/
/**
* @ngdoc method
* @name ng.$sce#trustAsJs
* @methodOf ng.$sce
*
* @description
* Shorthand method. `$sce.trustAsJs(value)` → {@link ng.$sceDelegate#trustAs `$sceDelegate.trustAs($sce.JS, value)`}
*
* @param {*} value The value to trustAs.
* @returns {*} An object that can be passed to {@link ng.$sce#getTrustedJs
* $sce.getTrustedJs(value)} to obtain the original value. (privileged directives
* only accept expressions that are either literal constants or are the
* return value of {@link ng.$sce#trustAs $sce.trustAs}.)
*/
/**
* @ngdoc method
* @name ng.$sce#getTrusted
* @methodOf ng.$sce
*
* @description
* Delegates to {@link ng.$sceDelegate#getTrusted `$sceDelegate.getTrusted`}. As such, takes
* the result of a {@link ng.$sce#trustAs `$sce.trustAs`}() call and returns the originally supplied
* value if the queried context type is a supertype of the created type. If this condition
* isn't satisfied, throws an exception.
*
* @param {string} type The kind of context in which this value is to be used.
* @param {*} maybeTrusted The result of a prior {@link ng.$sce#trustAs `$sce.trustAs`} call.
* @returns {*} The value the was originally provided to {@link ng.$sce#trustAs `$sce.trustAs`} if
* valid in this context. Otherwise, throws an exception.
*/
/**
* @ngdoc method
* @name ng.$sce#getTrustedHtml
* @methodOf ng.$sce
*
* @description
* Shorthand method. `$sce.getTrustedHtml(value)` → {@link ng.$sceDelegate#getTrusted `$sceDelegate.getTrusted($sce.HTML, value)`}
*
* @param {*} value The value to pass to `$sce.getTrusted`.
* @returns {*} The return value of `$sce.getTrusted($sce.HTML, value)`
*/
/**
* @ngdoc method
* @name ng.$sce#getTrustedCss
* @methodOf ng.$sce
*
* @description
* Shorthand method. `$sce.getTrustedCss(value)` → {@link ng.$sceDelegate#getTrusted `$sceDelegate.getTrusted($sce.CSS, value)`}
*
* @param {*} value The value to pass to `$sce.getTrusted`.
* @returns {*} The return value of `$sce.getTrusted($sce.CSS, value)`
*/
/**
* @ngdoc method
* @name ng.$sce#getTrustedUrl
* @methodOf ng.$sce
*
* @description
* Shorthand method. `$sce.getTrustedUrl(value)` → {@link ng.$sceDelegate#getTrusted `$sceDelegate.getTrusted($sce.URL, value)`}
*
* @param {*} value The value to pass to `$sce.getTrusted`.
* @returns {*} The return value of `$sce.getTrusted($sce.URL, value)`
*/
/**
* @ngdoc method
* @name ng.$sce#getTrustedResourceUrl
* @methodOf ng.$sce
*
* @description
* Shorthand method. `$sce.getTrustedResourceUrl(value)` → {@link ng.$sceDelegate#getTrusted `$sceDelegate.getTrusted($sce.RESOURCE_URL, value)`}
*
* @param {*} value The value to pass to `$sceDelegate.getTrusted`.
* @returns {*} The return value of `$sce.getTrusted($sce.RESOURCE_URL, value)`
*/
/**
* @ngdoc method
* @name ng.$sce#getTrustedJs
* @methodOf ng.$sce
*
* @description
* Shorthand method. `$sce.getTrustedJs(value)` → {@link ng.$sceDelegate#getTrusted `$sceDelegate.getTrusted($sce.JS, value)`}
*
* @param {*} value The value to pass to `$sce.getTrusted`.
* @returns {*} The return value of `$sce.getTrusted($sce.JS, value)`
*/
/**
* @ngdoc method
* @name ng.$sce#parseAsHtml
* @methodOf ng.$sce
*
* @description
* Shorthand method. `$sce.parseAsHtml(expression string)` → {@link ng.$sce#parse `$sce.parseAs($sce.HTML, value)`}
*
* @param {string} expression String expression to compile.
* @returns {function(context, locals)} a function which represents the compiled expression:
*
* * `context` – `{object}` – an object against which any expressions embedded in the strings
* are evaluated against (typically a scope object).
* * `locals` – `{object=}` – local variables context object, useful for overriding values in
* `context`.
*/
/**
* @ngdoc method
* @name ng.$sce#parseAsCss
* @methodOf ng.$sce
*
* @description
* Shorthand method. `$sce.parseAsCss(value)` → {@link ng.$sce#parse `$sce.parseAs($sce.CSS, value)`}
*
* @param {string} expression String expression to compile.
* @returns {function(context, locals)} a function which represents the compiled expression:
*
* * `context` – `{object}` – an object against which any expressions embedded in the strings
* are evaluated against (typically a scope object).
* * `locals` – `{object=}` – local variables context object, useful for overriding values in
* `context`.
*/
/**
* @ngdoc method
* @name ng.$sce#parseAsUrl
* @methodOf ng.$sce
*
* @description
* Shorthand method. `$sce.parseAsUrl(value)` → {@link ng.$sce#parse `$sce.parseAs($sce.URL, value)`}
*
* @param {string} expression String expression to compile.
* @returns {function(context, locals)} a function which represents the compiled expression:
*
* * `context` – `{object}` – an object against which any expressions embedded in the strings
* are evaluated against (typically a scope object).
* * `locals` – `{object=}` – local variables context object, useful for overriding values in
* `context`.
*/
/**
* @ngdoc method
* @name ng.$sce#parseAsResourceUrl
* @methodOf ng.$sce
*
* @description
* Shorthand method. `$sce.parseAsResourceUrl(value)` → {@link ng.$sce#parse `$sce.parseAs($sce.RESOURCE_URL, value)`}
*
* @param {string} expression String expression to compile.
* @returns {function(context, locals)} a function which represents the compiled expression:
*
* * `context` – `{object}` – an object against which any expressions embedded in the strings
* are evaluated against (typically a scope object).
* * `locals` – `{object=}` – local variables context object, useful for overriding values in
* `context`.
*/
/**
* @ngdoc method
* @name ng.$sce#parseAsJs
* @methodOf ng.$sce
*
* @description
* Shorthand method. `$sce.parseAsJs(value)` → {@link ng.$sce#parse `$sce.parseAs($sce.JS, value)`}
*
* @param {string} expression String expression to compile.
* @returns {function(context, locals)} a function which represents the compiled expression:
*
* * `context` – `{object}` – an object against which any expressions embedded in the strings
* are evaluated against (typically a scope object).
* * `locals` – `{object=}` – local variables context object, useful for overriding values in
* `context`.
*/
// Shorthand delegations.
var parse = sce.parseAs,
getTrusted = sce.getTrusted,
trustAs = sce.trustAs;
angular.forEach(SCE_CONTEXTS, function (enumValue, name) {
var lName = lowercase(name);
sce[camelCase("parse_as_" + lName)] = function (expr) {
return parse(enumValue, expr);
}
sce[camelCase("get_trusted_" + lName)] = function (value) {
return getTrusted(enumValue, value);
}
sce[camelCase("trust_as_" + lName)] = function (value) {
return trustAs(enumValue, value);
}
});
return sce;
}];
}
/**
* !!! This is an undocumented "private" service !!!
*
* @name ng.$sniffer
* @requires $window
* @requires $document
*
* @property {boolean} history Does the browser support html5 history api ?
* @property {boolean} hashchange Does the browser support hashchange event ?
* @property {boolean} transitions Does the browser support CSS transition events ?
* @property {boolean} animations Does the browser support CSS animation events ?
*
* @description
* This is very simple implementation of testing browser's features.
*/
function $SnifferProvider() {
this.$get = ['$window', '$document', function($window, $document) {
var eventSupport = {},
android = int((/android (\d+)/.exec(lowercase(($window.navigator || {}).userAgent)) || [])[1]),
document = $document[0] || {},
vendorPrefix,
vendorRegex = /^(Moz|webkit|O|ms)(?=[A-Z])/,
bodyStyle = document.body && document.body.style,
transitions = false,
animations = false,
match;
if (bodyStyle) {
for(var prop in bodyStyle) {
if(match = vendorRegex.exec(prop)) {
vendorPrefix = match[0];
vendorPrefix = vendorPrefix.substr(0, 1).toUpperCase() + vendorPrefix.substr(1);
break;
}
}
transitions = !!(('transition' in bodyStyle) || (vendorPrefix + 'Transition' in bodyStyle));
animations = !!(('animation' in bodyStyle) || (vendorPrefix + 'Animation' in bodyStyle));
if (android && (!transitions||!animations)) {
transitions = isString(document.body.style.webkitTransition);
animations = isString(document.body.style.webkitAnimation);
}
}
return {
// Android has history.pushState, but it does not update location correctly
// so let's not use the history API at all.
// http://code.google.com/p/android/issues/detail?id=17471
// https://github.com/angular/angular.js/issues/904
history: !!($window.history && $window.history.pushState && !(android < 4)),
hashchange: 'onhashchange' in $window &&
// IE8 compatible mode lies
(!document.documentMode || document.documentMode > 7),
hasEvent: function(event) {
// IE9 implements 'input' event it's so fubared that we rather pretend that it doesn't have
// it. In particular the event is not fired when backspace or delete key are pressed or
// when cut operation is performed.
if (event == 'input' && msie == 9) return false;
if (isUndefined(eventSupport[event])) {
var divElm = document.createElement('div');
eventSupport[event] = 'on' + event in divElm;
}
return eventSupport[event];
},
csp: document.securityPolicy ? document.securityPolicy.isActive : false,
vendorPrefix: vendorPrefix,
transitions : transitions,
animations : animations
};
}];
}
function $TimeoutProvider() {
this.$get = ['$rootScope', '$browser', '$q', '$exceptionHandler',
function($rootScope, $browser, $q, $exceptionHandler) {
var deferreds = {};
/**
* @ngdoc function
* @name ng.$timeout
* @requires $browser
*
* @description
* Angular's wrapper for `window.setTimeout`. The `fn` function is wrapped into a try/catch
* block and delegates any exceptions to
* {@link ng.$exceptionHandler $exceptionHandler} service.
*
* The return value of registering a timeout function is a promise, which will be resolved when
* the timeout is reached and the timeout function is executed.
*
* To cancel a timeout request, call `$timeout.cancel(promise)`.
*
* In tests you can use {@link ngMock.$timeout `$timeout.flush()`} to
* synchronously flush the queue of deferred functions.
*
* @param {function()} fn A function, whose execution should be delayed.
* @param {number=} [delay=0] Delay in milliseconds.
* @param {boolean=} [invokeApply=true] If set to `false` skips model dirty checking, otherwise
* will invoke `fn` within the {@link ng.$rootScope.Scope#$apply $apply} block.
* @returns {Promise} Promise that will be resolved when the timeout is reached. The value this
* promise will be resolved with is the return value of the `fn` function.
*/
function timeout(fn, delay, invokeApply) {
var deferred = $q.defer(),
promise = deferred.promise,
skipApply = (isDefined(invokeApply) && !invokeApply),
timeoutId, cleanup;
timeoutId = $browser.defer(function() {
try {
deferred.resolve(fn());
} catch(e) {
deferred.reject(e);
$exceptionHandler(e);
}
if (!skipApply) $rootScope.$apply();
}, delay);
cleanup = function() {
delete deferreds[promise.$$timeoutId];
};
promise.$$timeoutId = timeoutId;
deferreds[timeoutId] = deferred;
promise.then(cleanup, cleanup);
return promise;
}
/**
* @ngdoc function
* @name ng.$timeout#cancel
* @methodOf ng.$timeout
*
* @description
* Cancels a task associated with the `promise`. As a result of this, the promise will be
* resolved with a rejection.
*
* @param {Promise=} promise Promise returned by the `$timeout` function.
* @returns {boolean} Returns `true` if the task hasn't executed yet and was successfully
* canceled.
*/
timeout.cancel = function(promise) {
if (promise && promise.$$timeoutId in deferreds) {
deferreds[promise.$$timeoutId].reject('canceled');
return $browser.defer.cancel(promise.$$timeoutId);
}
return false;
};
return timeout;
}];
}
function $$UrlUtilsProvider() {
this.$get = [function() {
var urlParsingNode = document.createElement("a"),
// NOTE: The usage of window and document instead of $window and $document here is
// deliberate. This service depends on the specific behavior of anchor nodes created by the
// browser (resolving and parsing URLs) that is unlikely to be provided by mock objects and
// cause us to break tests. In addition, when the browser resolves a URL for XHR, it
// doesn't know about mocked locations and resolves URLs to the real document - which is
// exactly the behavior needed here. There is little value is mocking these our for this
// service.
originUrl = resolve(window.location.href, true);
/**
* @description
* Normalizes and optionally parses a URL.
*
* NOTE: This is a private service. The API is subject to change unpredictably in any commit.
*
* Implementation Notes for non-IE browsers
* ----------------------------------------
* Assigning a URL to the href property of an anchor DOM node, even one attached to the DOM,
* results both in the normalizing and parsing of the URL. Normalizing means that a relative
* URL will be resolved into an absolute URL in the context of the application document.
* Parsing means that the anchor node's host, hostname, protocol, port, pathname and related
* properties are all populated to reflect the normalized URL. This approach has wide
* compatibility - Safari 1+, Mozilla 1+, Opera 7+,e etc. See
* http://www.aptana.com/reference/html/api/HTMLAnchorElement.html
*
* Implementation Notes for IE
* ---------------------------
* IE >= 8 and <= 10 normalizes the URL when assigned to the anchor node similar to the other
* browsers. However, the parsed components will not be set if the URL assigned did not specify
* them. (e.g. if you assign a.href = "foo", then a.protocol, a.host, etc. will be empty.) We
* work around that by performing the parsing in a 2nd step by taking a previously normalized
* URL (e.g. by assining to a.href) and assigning it a.href again. This correctly populates the
* properties such as protocol, hostname, port, etc.
*
* IE7 does not normalize the URL when assigned to an anchor node. (Apparently, it does, if one
* uses the inner HTML approach to assign the URL as part of an HTML snippet -
* http://stackoverflow.com/a/472729) However, setting img[src] does normalize the URL.
* Unfortunately, setting img[src] to something like "javascript:foo" on IE throws an exception.
* Since the primary usage for normalizing URLs is to sanitize such URLs, we can't use that
* method and IE < 8 is unsupported.
*
* References:
* http://developer.mozilla.org/en-US/docs/Web/API/HTMLAnchorElement
* http://www.aptana.com/reference/html/api/HTMLAnchorElement.html
* http://url.spec.whatwg.org/#urlutils
* https://github.com/angular/angular.js/pull/2902
* http://james.padolsey.com/javascript/parsing-urls-with-the-dom/
*
* @param {string} url The URL to be parsed.
* @param {boolean=} parse When true, returns an object for the parsed URL. Otherwise, returns
* a single string that is the normalized URL.
* @returns {object|string} When parse is true, returns the normalized URL as a string.
* Otherwise, returns an object with the following members.
*
* | member name | Description |
* |===============|================|
* | href | A normalized version of the provided URL if it was not an absolute URL |
* | protocol | The protocol including the trailing colon |
* | host | The host and port (if the port is non-default) of the normalizedUrl |
*
* These fields from the UrlUtils interface are currently not needed and hence not returned.
*
* | member name | Description |
* |===============|================|
* | hostname | The host without the port of the normalizedUrl |
* | pathname | The path following the host in the normalizedUrl |
* | hash | The URL hash if present |
* | search | The query string |
*
*/
function resolve(url, parse) {
var href = url;
if (msie) {
// Normalize before parse. Refer Implementation Notes on why this is
// done in two steps on IE.
urlParsingNode.setAttribute("href", href);
href = urlParsingNode.href;
}
urlParsingNode.setAttribute('href', href);
if (!parse) {
return urlParsingNode.href;
}
// urlParsingNode provides the UrlUtils interface - http://url.spec.whatwg.org/#urlutils
return {
href: urlParsingNode.href,
protocol: urlParsingNode.protocol,
host: urlParsingNode.host
// Currently unused and hence commented out.
// hostname: urlParsingNode.hostname,
// port: urlParsingNode.port,
// pathname: urlParsingNode.pathname,
// hash: urlParsingNode.hash,
// search: urlParsingNode.search
};
}
return {
resolve: resolve,
/**
* Parse a request URL and determine whether this is a same-origin request as the application document.
*
* @param {string|object} requestUrl The url of the request as a string that will be resolved
* or a parsed URL object.
* @returns {boolean} Whether the request is for the same origin as the application document.
*/
isSameOrigin: function isSameOrigin(requestUrl) {
var parsed = (typeof requestUrl === 'string') ? resolve(requestUrl, true) : requestUrl;
return (parsed.protocol === originUrl.protocol &&
parsed.host === originUrl.host);
}
};
}];
}
/**
* @ngdoc object
* @name ng.$window
*
* @description
* A reference to the browser's `window` object. While `window`
* is globally available in JavaScript, it causes testability problems, because
* it is a global variable. In angular we always refer to it through the
* `$window` service, so it may be overridden, removed or mocked for testing.
*
* Expressions, like the one defined for the `ngClick` directive in the example
* below, are evaluated with respect to the current scope. Therefore, there is
* no risk of inadvertently coding in a dependency on a global value in such an
* expression.
*
* @example
<doc:example>
<doc:source>
<script>
function Ctrl($scope, $window) {
$scope.$window = $window;
$scope.greeting = 'Hello, World!';
}
</script>
<div ng-controller="Ctrl">
<input type="text" ng-model="greeting" />
<button ng-click="$window.alert(greeting)">ALERT</button>
</div>
</doc:source>
<doc:scenario>
it('should display the greeting in the input box', function() {
input('greeting').enter('Hello, E2E Tests');
// If we click the button it will block the test runner
// element(':button').click();
});
</doc:scenario>
</doc:example>
*/
function $WindowProvider(){
this.$get = valueFn(window);
}
/**
* @ngdoc object
* @name ng.$filterProvider
* @description
*
* Filters are just functions which transform input to an output. However filters need to be Dependency Injected. To
* achieve this a filter definition consists of a factory function which is annotated with dependencies and is
* responsible for creating a filter function.
*
* <pre>
* // Filter registration
* function MyModule($provide, $filterProvider) {
* // create a service to demonstrate injection (not always needed)
* $provide.value('greet', function(name){
* return 'Hello ' + name + '!';
* });
*
* // register a filter factory which uses the
* // greet service to demonstrate DI.
* $filterProvider.register('greet', function(greet){
* // return the filter function which uses the greet service
* // to generate salutation
* return function(text) {
* // filters need to be forgiving so check input validity
* return text && greet(text) || text;
* };
* });
* }
* </pre>
*
* The filter function is registered with the `$injector` under the filter name suffix with `Filter`.
* <pre>
* it('should be the same instance', inject(
* function($filterProvider) {
* $filterProvider.register('reverse', function(){
* return ...;
* });
* },
* function($filter, reverseFilter) {
* expect($filter('reverse')).toBe(reverseFilter);
* });
* </pre>
*
*
* For more information about how angular filters work, and how to create your own filters, see
* {@link guide/dev_guide.templates.filters Understanding Angular Filters} in the angular Developer
* Guide.
*/
/**
* @ngdoc method
* @name ng.$filterProvider#register
* @methodOf ng.$filterProvider
* @description
* Register filter factory function.
*
* @param {String} name Name of the filter.
* @param {function} fn The filter factory function which is injectable.
*/
/**
* @ngdoc function
* @name ng.$filter
* @function
* @description
* Filters are used for formatting data displayed to the user.
*
* The general syntax in templates is as follows:
*
* {{ expression [| filter_name[:parameter_value] ... ] }}
*
* @param {String} name Name of the filter function to retrieve
* @return {Function} the filter function
*/
$FilterProvider.$inject = ['$provide'];
function $FilterProvider($provide) {
var suffix = 'Filter';
function register(name, factory) {
return $provide.factory(name + suffix, factory);
}
this.register = register;
this.$get = ['$injector', function($injector) {
return function(name) {
return $injector.get(name + suffix);
}
}];
////////////////////////////////////////
register('currency', currencyFilter);
register('date', dateFilter);
register('filter', filterFilter);
register('json', jsonFilter);
register('limitTo', limitToFilter);
register('lowercase', lowercaseFilter);
register('number', numberFilter);
register('orderBy', orderByFilter);
register('uppercase', uppercaseFilter);
}
/**
* @ngdoc filter
* @name ng.filter:filter
* @function
*
* @description
* Selects a subset of items from `array` and returns it as a new array.
*
* Note: This function is used to augment the `Array` type in Angular expressions. See
* {@link ng.$filter} for more information about Angular arrays.
*
* @param {Array} array The source array.
* @param {string|Object|function()} expression The predicate to be used for selecting items from
* `array`.
*
* Can be one of:
*
* - `string`: Predicate that results in a substring match using the value of `expression`
* string. All strings or objects with string properties in `array` that contain this string
* will be returned. The predicate can be negated by prefixing the string with `!`.
*
* - `Object`: A pattern object can be used to filter specific properties on objects contained
* by `array`. For example `{name:"M", phone:"1"}` predicate will return an array of items
* which have property `name` containing "M" and property `phone` containing "1". A special
* property name `$` can be used (as in `{$:"text"}`) to accept a match against any
* property of the object. That's equivalent to the simple substring match with a `string`
* as described above.
*
* - `function`: A predicate function can be used to write arbitrary filters. The function is
* called for each element of `array`. The final result is an array of those elements that
* the predicate returned true for.
*
* @param {function(expected, actual)|true|undefined} comparator Comparator which is used in
* determining if the expected value (from the filter expression) and actual value (from
* the object in the array) should be considered a match.
*
* Can be one of:
*
* - `function(expected, actual)`:
* The function will be given the object value and the predicate value to compare and
* should return true if the item should be included in filtered result.
*
* - `true`: A shorthand for `function(expected, actual) { return angular.equals(expected, actual)}`.
* this is essentially strict comparison of expected and actual.
*
* - `false|undefined`: A short hand for a function which will look for a substring match in case
* insensitive way.
*
* @example
<doc:example>
<doc:source>
<div ng-init="friends = [{name:'John', phone:'555-1276'},
{name:'Mary', phone:'800-BIG-MARY'},
{name:'Mike', phone:'555-4321'},
{name:'Adam', phone:'555-5678'},
{name:'Julie', phone:'555-8765'},
{name:'Juliette', phone:'555-5678'}]"></div>
Search: <input ng-model="searchText">
<table id="searchTextResults">
<tr><th>Name</th><th>Phone</th></tr>
<tr ng-repeat="friend in friends | filter:searchText">
<td>{{friend.name}}</td>
<td>{{friend.phone}}</td>
</tr>
</table>
<hr>
Any: <input ng-model="search.$"> <br>
Name only <input ng-model="search.name"><br>
Phone only <input ng-model="search.phone"><br>
Equality <input type="checkbox" ng-model="strict"><br>
<table id="searchObjResults">
<tr><th>Name</th><th>Phone</th></tr>
<tr ng-repeat="friend in friends | filter:search:strict">
<td>{{friend.name}}</td>
<td>{{friend.phone}}</td>
</tr>
</table>
</doc:source>
<doc:scenario>
it('should search across all fields when filtering with a string', function() {
input('searchText').enter('m');
expect(repeater('#searchTextResults tr', 'friend in friends').column('friend.name')).
toEqual(['Mary', 'Mike', 'Adam']);
input('searchText').enter('76');
expect(repeater('#searchTextResults tr', 'friend in friends').column('friend.name')).
toEqual(['John', 'Julie']);
});
it('should search in specific fields when filtering with a predicate object', function() {
input('search.$').enter('i');
expect(repeater('#searchObjResults tr', 'friend in friends').column('friend.name')).
toEqual(['Mary', 'Mike', 'Julie', 'Juliette']);
});
it('should use a equal comparison when comparator is true', function() {
input('search.name').enter('Julie');
input('strict').check();
expect(repeater('#searchObjResults tr', 'friend in friends').column('friend.name')).
toEqual(['Julie']);
});
</doc:scenario>
</doc:example>
*/
function filterFilter() {
return function(array, expression, comperator) {
if (!isArray(array)) return array;
var predicates = [];
predicates.check = function(value) {
for (var j = 0; j < predicates.length; j++) {
if(!predicates[j](value)) {
return false;
}
}
return true;
};
switch(typeof comperator) {
case "function":
break;
case "boolean":
if(comperator == true) {
comperator = function(obj, text) {
return angular.equals(obj, text);
}
break;
}
default:
comperator = function(obj, text) {
text = (''+text).toLowerCase();
return (''+obj).toLowerCase().indexOf(text) > -1
};
}
var search = function(obj, text){
if (typeof text == 'string' && text.charAt(0) === '!') {
return !search(obj, text.substr(1));
}
switch (typeof obj) {
case "boolean":
case "number":
case "string":
return comperator(obj, text);
case "object":
switch (typeof text) {
case "object":
return comperator(obj, text);
break;
default:
for ( var objKey in obj) {
if (objKey.charAt(0) !== '$' && search(obj[objKey], text)) {
return true;
}
}
break;
}
return false;
case "array":
for ( var i = 0; i < obj.length; i++) {
if (search(obj[i], text)) {
return true;
}
}
return false;
default:
return false;
}
};
switch (typeof expression) {
case "boolean":
case "number":
case "string":
expression = {$:expression};
case "object":
for (var key in expression) {
if (key == '$') {
(function() {
if (!expression[key]) return;
var path = key
predicates.push(function(value) {
return search(value, expression[path]);
});
})();
} else {
(function() {
if (!expression[key]) return;
var path = key;
predicates.push(function(value) {
return search(getter(value,path), expression[path]);
});
})();
}
}
break;
case 'function':
predicates.push(expression);
break;
default:
return array;
}
var filtered = [];
for ( var j = 0; j < array.length; j++) {
var value = array[j];
if (predicates.check(value)) {
filtered.push(value);
}
}
return filtered;
}
}
/**
* @ngdoc filter
* @name ng.filter:currency
* @function
*
* @description
* Formats a number as a currency (ie $1,234.56). When no currency symbol is provided, default
* symbol for current locale is used.
*
* @param {number} amount Input to filter.
* @param {string=} symbol Currency symbol or identifier to be displayed.
* @returns {string} Formatted number.
*
*
* @example
<doc:example>
<doc:source>
<script>
function Ctrl($scope) {
$scope.amount = 1234.56;
}
</script>
<div ng-controller="Ctrl">
<input type="number" ng-model="amount"> <br>
default currency symbol ($): {{amount | currency}}<br>
custom currency identifier (USD$): {{amount | currency:"USD$"}}
</div>
</doc:source>
<doc:scenario>
it('should init with 1234.56', function() {
expect(binding('amount | currency')).toBe('$1,234.56');
expect(binding('amount | currency:"USD$"')).toBe('USD$1,234.56');
});
it('should update', function() {
input('amount').enter('-1234');
expect(binding('amount | currency')).toBe('($1,234.00)');
expect(binding('amount | currency:"USD$"')).toBe('(USD$1,234.00)');
});
</doc:scenario>
</doc:example>
*/
currencyFilter.$inject = ['$locale'];
function currencyFilter($locale) {
var formats = $locale.NUMBER_FORMATS;
return function(amount, currencySymbol){
if (isUndefined(currencySymbol)) currencySymbol = formats.CURRENCY_SYM;
return formatNumber(amount, formats.PATTERNS[1], formats.GROUP_SEP, formats.DECIMAL_SEP, 2).
replace(/\u00A4/g, currencySymbol);
};
}
/**
* @ngdoc filter
* @name ng.filter:number
* @function
*
* @description
* Formats a number as text.
*
* If the input is not a number an empty string is returned.
*
* @param {number|string} number Number to format.
* @param {(number|string)=} fractionSize Number of decimal places to round the number to.
* If this is not provided then the fraction size is computed from the current locale's number
* formatting pattern. In the case of the default locale, it will be 3.
* @returns {string} Number rounded to decimalPlaces and places a “,” after each third digit.
*
* @example
<doc:example>
<doc:source>
<script>
function Ctrl($scope) {
$scope.val = 1234.56789;
}
</script>
<div ng-controller="Ctrl">
Enter number: <input ng-model='val'><br>
Default formatting: {{val | number}}<br>
No fractions: {{val | number:0}}<br>
Negative number: {{-val | number:4}}
</div>
</doc:source>
<doc:scenario>
it('should format numbers', function() {
expect(binding('val | number')).toBe('1,234.568');
expect(binding('val | number:0')).toBe('1,235');
expect(binding('-val | number:4')).toBe('-1,234.5679');
});
it('should update', function() {
input('val').enter('3374.333');
expect(binding('val | number')).toBe('3,374.333');
expect(binding('val | number:0')).toBe('3,374');
expect(binding('-val | number:4')).toBe('-3,374.3330');
});
</doc:scenario>
</doc:example>
*/
numberFilter.$inject = ['$locale'];
function numberFilter($locale) {
var formats = $locale.NUMBER_FORMATS;
return function(number, fractionSize) {
return formatNumber(number, formats.PATTERNS[0], formats.GROUP_SEP, formats.DECIMAL_SEP,
fractionSize);
};
}
var DECIMAL_SEP = '.';
function formatNumber(number, pattern, groupSep, decimalSep, fractionSize) {
if (isNaN(number) || !isFinite(number)) return '';
var isNegative = number < 0;
number = Math.abs(number);
var numStr = number + '',
formatedText = '',
parts = [];
var hasExponent = false;
if (numStr.indexOf('e') !== -1) {
var match = numStr.match(/([\d\.]+)e(-?)(\d+)/);
if (match && match[2] == '-' && match[3] > fractionSize + 1) {
numStr = '0';
} else {
formatedText = numStr;
hasExponent = true;
}
}
if (!hasExponent) {
var fractionLen = (numStr.split(DECIMAL_SEP)[1] || '').length;
// determine fractionSize if it is not specified
if (isUndefined(fractionSize)) {
fractionSize = Math.min(Math.max(pattern.minFrac, fractionLen), pattern.maxFrac);
}
var pow = Math.pow(10, fractionSize);
number = Math.round(number * pow) / pow;
var fraction = ('' + number).split(DECIMAL_SEP);
var whole = fraction[0];
fraction = fraction[1] || '';
var pos = 0,
lgroup = pattern.lgSize,
group = pattern.gSize;
if (whole.length >= (lgroup + group)) {
pos = whole.length - lgroup;
for (var i = 0; i < pos; i++) {
if ((pos - i)%group === 0 && i !== 0) {
formatedText += groupSep;
}
formatedText += whole.charAt(i);
}
}
for (i = pos; i < whole.length; i++) {
if ((whole.length - i)%lgroup === 0 && i !== 0) {
formatedText += groupSep;
}
formatedText += whole.charAt(i);
}
// format fraction part.
while(fraction.length < fractionSize) {
fraction += '0';
}
if (fractionSize && fractionSize !== "0") formatedText += decimalSep + fraction.substr(0, fractionSize);
} else {
if (fractionSize > 0 && number > -1 && number < 1) {
formatedText = number.toFixed(fractionSize);
}
}
parts.push(isNegative ? pattern.negPre : pattern.posPre);
parts.push(formatedText);
parts.push(isNegative ? pattern.negSuf : pattern.posSuf);
return parts.join('');
}
function padNumber(num, digits, trim) {
var neg = '';
if (num < 0) {
neg = '-';
num = -num;
}
num = '' + num;
while(num.length < digits) num = '0' + num;
if (trim)
num = num.substr(num.length - digits);
return neg + num;
}
function dateGetter(name, size, offset, trim) {
offset = offset || 0;
return function(date) {
var value = date['get' + name]();
if (offset > 0 || value > -offset)
value += offset;
if (value === 0 && offset == -12 ) value = 12;
return padNumber(value, size, trim);
};
}
function dateStrGetter(name, shortForm) {
return function(date, formats) {
var value = date['get' + name]();
var get = uppercase(shortForm ? ('SHORT' + name) : name);
return formats[get][value];
};
}
function timeZoneGetter(date) {
var zone = -1 * date.getTimezoneOffset();
var paddedZone = (zone >= 0) ? "+" : "";
paddedZone += padNumber(Math[zone > 0 ? 'floor' : 'ceil'](zone / 60), 2) +
padNumber(Math.abs(zone % 60), 2);
return paddedZone;
}
function ampmGetter(date, formats) {
return date.getHours() < 12 ? formats.AMPMS[0] : formats.AMPMS[1];
}
var DATE_FORMATS = {
yyyy: dateGetter('FullYear', 4),
yy: dateGetter('FullYear', 2, 0, true),
y: dateGetter('FullYear', 1),
MMMM: dateStrGetter('Month'),
MMM: dateStrGetter('Month', true),
MM: dateGetter('Month', 2, 1),
M: dateGetter('Month', 1, 1),
dd: dateGetter('Date', 2),
d: dateGetter('Date', 1),
HH: dateGetter('Hours', 2),
H: dateGetter('Hours', 1),
hh: dateGetter('Hours', 2, -12),
h: dateGetter('Hours', 1, -12),
mm: dateGetter('Minutes', 2),
m: dateGetter('Minutes', 1),
ss: dateGetter('Seconds', 2),
s: dateGetter('Seconds', 1),
// while ISO 8601 requires fractions to be prefixed with `.` or `,`
// we can be just safely rely on using `sss` since we currently don't support single or two digit fractions
sss: dateGetter('Milliseconds', 3),
EEEE: dateStrGetter('Day'),
EEE: dateStrGetter('Day', true),
a: ampmGetter,
Z: timeZoneGetter
};
var DATE_FORMATS_SPLIT = /((?:[^yMdHhmsaZE']+)|(?:'(?:[^']|'')*')|(?:E+|y+|M+|d+|H+|h+|m+|s+|a|Z))(.*)/,
NUMBER_STRING = /^\d+$/;
/**
* @ngdoc filter
* @name ng.filter:date
* @function
*
* @description
* Formats `date` to a string based on the requested `format`.
*
* `format` string can be composed of the following elements:
*
* * `'yyyy'`: 4 digit representation of year (e.g. AD 1 => 0001, AD 2010 => 2010)
* * `'yy'`: 2 digit representation of year, padded (00-99). (e.g. AD 2001 => 01, AD 2010 => 10)
* * `'y'`: 1 digit representation of year, e.g. (AD 1 => 1, AD 199 => 199)
* * `'MMMM'`: Month in year (January-December)
* * `'MMM'`: Month in year (Jan-Dec)
* * `'MM'`: Month in year, padded (01-12)
* * `'M'`: Month in year (1-12)
* * `'dd'`: Day in month, padded (01-31)
* * `'d'`: Day in month (1-31)
* * `'EEEE'`: Day in Week,(Sunday-Saturday)
* * `'EEE'`: Day in Week, (Sun-Sat)
* * `'HH'`: Hour in day, padded (00-23)
* * `'H'`: Hour in day (0-23)
* * `'hh'`: Hour in am/pm, padded (01-12)
* * `'h'`: Hour in am/pm, (1-12)
* * `'mm'`: Minute in hour, padded (00-59)
* * `'m'`: Minute in hour (0-59)
* * `'ss'`: Second in minute, padded (00-59)
* * `'s'`: Second in minute (0-59)
* * `'.sss' or ',sss'`: Millisecond in second, padded (000-999)
* * `'a'`: am/pm marker
* * `'Z'`: 4 digit (+sign) representation of the timezone offset (-1200-+1200)
*
* `format` string can also be one of the following predefined
* {@link guide/i18n localizable formats}:
*
* * `'medium'`: equivalent to `'MMM d, y h:mm:ss a'` for en_US locale
* (e.g. Sep 3, 2010 12:05:08 pm)
* * `'short'`: equivalent to `'M/d/yy h:mm a'` for en_US locale (e.g. 9/3/10 12:05 pm)
* * `'fullDate'`: equivalent to `'EEEE, MMMM d,y'` for en_US locale
* (e.g. Friday, September 3, 2010)
* * `'longDate'`: equivalent to `'MMMM d, y'` for en_US locale (e.g. September 3, 2010)
* * `'mediumDate'`: equivalent to `'MMM d, y'` for en_US locale (e.g. Sep 3, 2010)
* * `'shortDate'`: equivalent to `'M/d/yy'` for en_US locale (e.g. 9/3/10)
* * `'mediumTime'`: equivalent to `'h:mm:ss a'` for en_US locale (e.g. 12:05:08 pm)
* * `'shortTime'`: equivalent to `'h:mm a'` for en_US locale (e.g. 12:05 pm)
*
* `format` string can contain literal values. These need to be quoted with single quotes (e.g.
* `"h 'in the morning'"`). In order to output single quote, use two single quotes in a sequence
* (e.g. `"h 'o''clock'"`).
*
* @param {(Date|number|string)} date Date to format either as Date object, milliseconds (string or
* number) or various ISO 8601 datetime string formats (e.g. yyyy-MM-ddTHH:mm:ss.SSSZ and its
* shorter versions like yyyy-MM-ddTHH:mmZ, yyyy-MM-dd or yyyyMMddTHHmmssZ). If no timezone is
* specified in the string input, the time is considered to be in the local timezone.
* @param {string=} format Formatting rules (see Description). If not specified,
* `mediumDate` is used.
* @returns {string} Formatted string or the input if input is not recognized as date/millis.
*
* @example
<doc:example>
<doc:source>
<span ng-non-bindable>{{1288323623006 | date:'medium'}}</span>:
{{1288323623006 | date:'medium'}}<br>
<span ng-non-bindable>{{1288323623006 | date:'yyyy-MM-dd HH:mm:ss Z'}}</span>:
{{1288323623006 | date:'yyyy-MM-dd HH:mm:ss Z'}}<br>
<span ng-non-bindable>{{1288323623006 | date:'MM/dd/yyyy @ h:mma'}}</span>:
{{'1288323623006' | date:'MM/dd/yyyy @ h:mma'}}<br>
</doc:source>
<doc:scenario>
it('should format date', function() {
expect(binding("1288323623006 | date:'medium'")).
toMatch(/Oct 2\d, 2010 \d{1,2}:\d{2}:\d{2} (AM|PM)/);
expect(binding("1288323623006 | date:'yyyy-MM-dd HH:mm:ss Z'")).
toMatch(/2010\-10\-2\d \d{2}:\d{2}:\d{2} (\-|\+)?\d{4}/);
expect(binding("'1288323623006' | date:'MM/dd/yyyy @ h:mma'")).
toMatch(/10\/2\d\/2010 @ \d{1,2}:\d{2}(AM|PM)/);
});
</doc:scenario>
</doc:example>
*/
dateFilter.$inject = ['$locale'];
function dateFilter($locale) {
var R_ISO8601_STR = /^(\d{4})-?(\d\d)-?(\d\d)(?:T(\d\d)(?::?(\d\d)(?::?(\d\d)(?:\.(\d+))?)?)?(Z|([+-])(\d\d):?(\d\d))?)?$/;
// 1 2 3 4 5 6 7 8 9 10 11
function jsonStringToDate(string) {
var match;
if (match = string.match(R_ISO8601_STR)) {
var date = new Date(0),
tzHour = 0,
tzMin = 0,
dateSetter = match[8] ? date.setUTCFullYear : date.setFullYear,
timeSetter = match[8] ? date.setUTCHours : date.setHours;
if (match[9]) {
tzHour = int(match[9] + match[10]);
tzMin = int(match[9] + match[11]);
}
dateSetter.call(date, int(match[1]), int(match[2]) - 1, int(match[3]));
var h = int(match[4]||0) - tzHour;
var m = int(match[5]||0) - tzMin
var s = int(match[6]||0);
var ms = Math.round(parseFloat('0.' + (match[7]||0)) * 1000);
timeSetter.call(date, h, m, s, ms);
return date;
}
return string;
}
return function(date, format) {
var text = '',
parts = [],
fn, match;
format = format || 'mediumDate';
format = $locale.DATETIME_FORMATS[format] || format;
if (isString(date)) {
if (NUMBER_STRING.test(date)) {
date = int(date);
} else {
date = jsonStringToDate(date);
}
}
if (isNumber(date)) {
date = new Date(date);
}
if (!isDate(date)) {
return date;
}
while(format) {
match = DATE_FORMATS_SPLIT.exec(format);
if (match) {
parts = concat(parts, match, 1);
format = parts.pop();
} else {
parts.push(format);
format = null;
}
}
forEach(parts, function(value){
fn = DATE_FORMATS[value];
text += fn ? fn(date, $locale.DATETIME_FORMATS)
: value.replace(/(^'|'$)/g, '').replace(/''/g, "'");
});
return text;
};
}
/**
* @ngdoc filter
* @name ng.filter:json
* @function
*
* @description
* Allows you to convert a JavaScript object into JSON string.
*
* This filter is mostly useful for debugging. When using the double curly {{value}} notation
* the binding is automatically converted to JSON.
*
* @param {*} object Any JavaScript object (including arrays and primitive types) to filter.
* @returns {string} JSON string.
*
*
* @example:
<doc:example>
<doc:source>
<pre>{{ {'name':'value'} | json }}</pre>
</doc:source>
<doc:scenario>
it('should jsonify filtered objects', function() {
expect(binding("{'name':'value'}")).toMatch(/\{\n "name": ?"value"\n}/);
});
</doc:scenario>
</doc:example>
*
*/
function jsonFilter() {
return function(object) {
return toJson(object, true);
};
}
/**
* @ngdoc filter
* @name ng.filter:lowercase
* @function
* @description
* Converts string to lowercase.
* @see angular.lowercase
*/
var lowercaseFilter = valueFn(lowercase);
/**
* @ngdoc filter
* @name ng.filter:uppercase
* @function
* @description
* Converts string to uppercase.
* @see angular.uppercase
*/
var uppercaseFilter = valueFn(uppercase);
/**
* @ngdoc function
* @name ng.filter:limitTo
* @function
*
* @description
* Creates a new array or string containing only a specified number of elements. The elements
* are taken from either the beginning or the end of the source array or string, as specified by
* the value and sign (positive or negative) of `limit`.
*
* Note: This function is used to augment the `Array` type in Angular expressions. See
* {@link ng.$filter} for more information about Angular arrays.
*
* @param {Array|string} input Source array or string to be limited.
* @param {string|number} limit The length of the returned array or string. If the `limit` number
* is positive, `limit` number of items from the beginning of the source array/string are copied.
* If the number is negative, `limit` number of items from the end of the source array/string
* are copied. The `limit` will be trimmed if it exceeds `array.length`
* @returns {Array|string} A new sub-array or substring of length `limit` or less if input array
* had less than `limit` elements.
*
* @example
<doc:example>
<doc:source>
<script>
function Ctrl($scope) {
$scope.numbers = [1,2,3,4,5,6,7,8,9];
$scope.letters = "abcdefghi";
$scope.numLimit = 3;
$scope.letterLimit = 3;
}
</script>
<div ng-controller="Ctrl">
Limit {{numbers}} to: <input type="integer" ng-model="numLimit">
<p>Output numbers: {{ numbers | limitTo:numLimit }}</p>
Limit {{letters}} to: <input type="integer" ng-model="letterLimit">
<p>Output letters: {{ letters | limitTo:letterLimit }}</p>
</div>
</doc:source>
<doc:scenario>
it('should limit the number array to first three items', function() {
expect(element('.doc-example-live input[ng-model=numLimit]').val()).toBe('3');
expect(element('.doc-example-live input[ng-model=letterLimit]').val()).toBe('3');
expect(binding('numbers | limitTo:numLimit')).toEqual('[1,2,3]');
expect(binding('letters | limitTo:letterLimit')).toEqual('abc');
});
it('should update the output when -3 is entered', function() {
input('numLimit').enter(-3);
input('letterLimit').enter(-3);
expect(binding('numbers | limitTo:numLimit')).toEqual('[7,8,9]');
expect(binding('letters | limitTo:letterLimit')).toEqual('ghi');
});
it('should not exceed the maximum size of input array', function() {
input('numLimit').enter(100);
input('letterLimit').enter(100);
expect(binding('numbers | limitTo:numLimit')).toEqual('[1,2,3,4,5,6,7,8,9]');
expect(binding('letters | limitTo:letterLimit')).toEqual('abcdefghi');
});
</doc:scenario>
</doc:example>
*/
function limitToFilter(){
return function(input, limit) {
if (!isArray(input) && !isString(input)) return input;
limit = int(limit);
if (isString(input)) {
//NaN check on limit
if (limit) {
return limit >= 0 ? input.slice(0, limit) : input.slice(limit, input.length);
} else {
return "";
}
}
var out = [],
i, n;
// if abs(limit) exceeds maximum length, trim it
if (limit > input.length)
limit = input.length;
else if (limit < -input.length)
limit = -input.length;
if (limit > 0) {
i = 0;
n = limit;
} else {
i = input.length + limit;
n = input.length;
}
for (; i<n; i++) {
out.push(input[i]);
}
return out;
}
}
/**
* @ngdoc function
* @name ng.filter:orderBy
* @function
*
* @description
* Orders a specified `array` by the `expression` predicate.
*
* Note: this function is used to augment the `Array` type in Angular expressions. See
* {@link ng.$filter} for more information about Angular arrays.
*
* @param {Array} array The array to sort.
* @param {function(*)|string|Array.<(function(*)|string)>} expression A predicate to be
* used by the comparator to determine the order of elements.
*
* Can be one of:
*
* - `function`: Getter function. The result of this function will be sorted using the
* `<`, `=`, `>` operator.
* - `string`: An Angular expression which evaluates to an object to order by, such as 'name'
* to sort by a property called 'name'. Optionally prefixed with `+` or `-` to control
* ascending or descending sort order (for example, +name or -name).
* - `Array`: An array of function or string predicates. The first predicate in the array
* is used for sorting, but when two items are equivalent, the next predicate is used.
*
* @param {boolean=} reverse Reverse the order the array.
* @returns {Array} Sorted copy of the source array.
*
* @example
<doc:example>
<doc:source>
<script>
function Ctrl($scope) {
$scope.friends =
[{name:'John', phone:'555-1212', age:10},
{name:'Mary', phone:'555-9876', age:19},
{name:'Mike', phone:'555-4321', age:21},
{name:'Adam', phone:'555-5678', age:35},
{name:'Julie', phone:'555-8765', age:29}]
$scope.predicate = '-age';
}
</script>
<div ng-controller="Ctrl">
<pre>Sorting predicate = {{predicate}}; reverse = {{reverse}}</pre>
<hr/>
[ <a href="" ng-click="predicate=''">unsorted</a> ]
<table class="friend">
<tr>
<th><a href="" ng-click="predicate = 'name'; reverse=false">Name</a>
(<a href ng-click="predicate = '-name'; reverse=false">^</a>)</th>
<th><a href="" ng-click="predicate = 'phone'; reverse=!reverse">Phone Number</a></th>
<th><a href="" ng-click="predicate = 'age'; reverse=!reverse">Age</a></th>
</tr>
<tr ng-repeat="friend in friends | orderBy:predicate:reverse">
<td>{{friend.name}}</td>
<td>{{friend.phone}}</td>
<td>{{friend.age}}</td>
</tr>
</table>
</div>
</doc:source>
<doc:scenario>
it('should be reverse ordered by aged', function() {
expect(binding('predicate')).toBe('-age');
expect(repeater('table.friend', 'friend in friends').column('friend.age')).
toEqual(['35', '29', '21', '19', '10']);
expect(repeater('table.friend', 'friend in friends').column('friend.name')).
toEqual(['Adam', 'Julie', 'Mike', 'Mary', 'John']);
});
it('should reorder the table when user selects different predicate', function() {
element('.doc-example-live a:contains("Name")').click();
expect(repeater('table.friend', 'friend in friends').column('friend.name')).
toEqual(['Adam', 'John', 'Julie', 'Mary', 'Mike']);
expect(repeater('table.friend', 'friend in friends').column('friend.age')).
toEqual(['35', '10', '29', '19', '21']);
element('.doc-example-live a:contains("Phone")').click();
expect(repeater('table.friend', 'friend in friends').column('friend.phone')).
toEqual(['555-9876', '555-8765', '555-5678', '555-4321', '555-1212']);
expect(repeater('table.friend', 'friend in friends').column('friend.name')).
toEqual(['Mary', 'Julie', 'Adam', 'Mike', 'John']);
});
</doc:scenario>
</doc:example>
*/
orderByFilter.$inject = ['$parse'];
function orderByFilter($parse){
return function(array, sortPredicate, reverseOrder) {
if (!isArray(array)) return array;
if (!sortPredicate) return array;
sortPredicate = isArray(sortPredicate) ? sortPredicate: [sortPredicate];
sortPredicate = map(sortPredicate, function(predicate){
var descending = false, get = predicate || identity;
if (isString(predicate)) {
if ((predicate.charAt(0) == '+' || predicate.charAt(0) == '-')) {
descending = predicate.charAt(0) == '-';
predicate = predicate.substring(1);
}
get = $parse(predicate);
}
return reverseComparator(function(a,b){
return compare(get(a),get(b));
}, descending);
});
var arrayCopy = [];
for ( var i = 0; i < array.length; i++) { arrayCopy.push(array[i]); }
return arrayCopy.sort(reverseComparator(comparator, reverseOrder));
function comparator(o1, o2){
for ( var i = 0; i < sortPredicate.length; i++) {
var comp = sortPredicate[i](o1, o2);
if (comp !== 0) return comp;
}
return 0;
}
function reverseComparator(comp, descending) {
return toBoolean(descending)
? function(a,b){return comp(b,a);}
: comp;
}
function compare(v1, v2){
var t1 = typeof v1;
var t2 = typeof v2;
if (t1 == t2) {
if (t1 == "string") v1 = v1.toLowerCase();
if (t1 == "string") v2 = v2.toLowerCase();
if (v1 === v2) return 0;
return v1 < v2 ? -1 : 1;
} else {
return t1 < t2 ? -1 : 1;
}
}
}
}
function ngDirective(directive) {
if (isFunction(directive)) {
directive = {
link: directive
}
}
directive.restrict = directive.restrict || 'AC';
return valueFn(directive);
}
/**
* @ngdoc directive
* @name ng.directive:a
* @restrict E
*
* @description
* Modifies the default behavior of html A tag, so that the default action is prevented when href
* attribute is empty.
*
* The reasoning for this change is to allow easy creation of action links with `ngClick` directive
* without changing the location or causing page reloads, e.g.:
* `<a href="" ng-click="model.$save()">Save</a>`
*/
var htmlAnchorDirective = valueFn({
restrict: 'E',
compile: function(element, attr) {
if (msie <= 8) {
// turn <a href ng-click="..">link</a> into a stylable link in IE
// but only if it doesn't have name attribute, in which case it's an anchor
if (!attr.href && !attr.name) {
attr.$set('href', '');
}
// add a comment node to anchors to workaround IE bug that causes element content to be reset
// to new attribute content if attribute is updated with value containing @ and element also
// contains value with @
// see issue #1949
element.append(document.createComment('IE fix'));
}
return function(scope, element) {
element.on('click', function(event){
// if we have no href url, then don't navigate anywhere.
if (!element.attr('href')) {
event.preventDefault();
}
});
}
}
});
/**
* @ngdoc directive
* @name ng.directive:ngHref
* @restrict A
*
* @description
* Using Angular markup like {{hash}} in an href attribute makes
* the page open to a wrong URL, if the user clicks that link before
* angular has a chance to replace the {{hash}} with actual URL, the
* link will be broken and will most likely return a 404 error.
* The `ngHref` directive solves this problem.
*
* The buggy way to write it:
* <pre>
* <a href="http://www.gravatar.com/avatar/{{hash}}"/>
* </pre>
*
* The correct way to write it:
* <pre>
* <a ng-href="http://www.gravatar.com/avatar/{{hash}}"/>
* </pre>
*
* @element A
* @param {template} ngHref any string which can contain `{{}}` markup.
*
* @example
* This example uses `link` variable inside `href` attribute:
<doc:example>
<doc:source>
<input ng-model="value" /><br />
<a id="link-1" href ng-click="value = 1">link 1</a> (link, don't reload)<br />
<a id="link-2" href="" ng-click="value = 2">link 2</a> (link, don't reload)<br />
<a id="link-3" ng-href="/{{'123'}}">link 3</a> (link, reload!)<br />
<a id="link-4" href="" name="xx" ng-click="value = 4">anchor</a> (link, don't reload)<br />
<a id="link-5" name="xxx" ng-click="value = 5">anchor</a> (no link)<br />
<a id="link-6" ng-href="{{value}}">link</a> (link, change location)
</doc:source>
<doc:scenario>
it('should execute ng-click but not reload when href without value', function() {
element('#link-1').click();
expect(input('value').val()).toEqual('1');
expect(element('#link-1').attr('href')).toBe("");
});
it('should execute ng-click but not reload when href empty string', function() {
element('#link-2').click();
expect(input('value').val()).toEqual('2');
expect(element('#link-2').attr('href')).toBe("");
});
it('should execute ng-click and change url when ng-href specified', function() {
expect(element('#link-3').attr('href')).toBe("/123");
element('#link-3').click();
expect(browser().window().path()).toEqual('/123');
});
it('should execute ng-click but not reload when href empty string and name specified', function() {
element('#link-4').click();
expect(input('value').val()).toEqual('4');
expect(element('#link-4').attr('href')).toBe('');
});
it('should execute ng-click but not reload when no href but name specified', function() {
element('#link-5').click();
expect(input('value').val()).toEqual('5');
expect(element('#link-5').attr('href')).toBe(undefined);
});
it('should only change url when only ng-href', function() {
input('value').enter('6');
expect(element('#link-6').attr('href')).toBe('6');
element('#link-6').click();
expect(browser().location().url()).toEqual('/6');
});
</doc:scenario>
</doc:example>
*/
/**
* @ngdoc directive
* @name ng.directive:ngSrc
* @restrict A
*
* @description
* Using Angular markup like `{{hash}}` in a `src` attribute doesn't
* work right: The browser will fetch from the URL with the literal
* text `{{hash}}` until Angular replaces the expression inside
* `{{hash}}`. The `ngSrc` directive solves this problem.
*
* The buggy way to write it:
* <pre>
* <img src="http://www.gravatar.com/avatar/{{hash}}"/>
* </pre>
*
* The correct way to write it:
* <pre>
* <img ng-src="http://www.gravatar.com/avatar/{{hash}}"/>
* </pre>
*
* @element IMG
* @param {template} ngSrc any string which can contain `{{}}` markup.
*/
/**
* @ngdoc directive
* @name ng.directive:ngSrcset
* @restrict A
*
* @description
* Using Angular markup like `{{hash}}` in a `srcset` attribute doesn't
* work right: The browser will fetch from the URL with the literal
* text `{{hash}}` until Angular replaces the expression inside
* `{{hash}}`. The `ngSrcset` directive solves this problem.
*
* The buggy way to write it:
* <pre>
* <img srcset="http://www.gravatar.com/avatar/{{hash}} 2x"/>
* </pre>
*
* The correct way to write it:
* <pre>
* <img ng-srcset="http://www.gravatar.com/avatar/{{hash}} 2x"/>
* </pre>
*
* @element IMG
* @param {template} ngSrcset any string which can contain `{{}}` markup.
*/
/**
* @ngdoc directive
* @name ng.directive:ngDisabled
* @restrict A
*
* @description
*
* The following markup will make the button enabled on Chrome/Firefox but not on IE8 and older IEs:
* <pre>
* <div ng-init="scope = { isDisabled: false }">
* <button disabled="{{scope.isDisabled}}">Disabled</button>
* </div>
* </pre>
*
* The HTML specs do not require browsers to preserve the special attributes such as disabled.
* (The presence of them means true and absence means false)
* This prevents the angular compiler from correctly retrieving the binding expression.
* To solve this problem, we introduce the `ngDisabled` directive.
*
* @example
<doc:example>
<doc:source>
Click me to toggle: <input type="checkbox" ng-model="checked"><br/>
<button ng-model="button" ng-disabled="checked">Button</button>
</doc:source>
<doc:scenario>
it('should toggle button', function() {
expect(element('.doc-example-live :button').prop('disabled')).toBeFalsy();
input('checked').check();
expect(element('.doc-example-live :button').prop('disabled')).toBeTruthy();
});
</doc:scenario>
</doc:example>
*
* @element INPUT
* @param {expression} ngDisabled Angular expression that will be evaluated.
*/
/**
* @ngdoc directive
* @name ng.directive:ngChecked
* @restrict A
*
* @description
* The HTML specs do not require browsers to preserve the special attributes such as checked.
* (The presence of them means true and absence means false)
* This prevents the angular compiler from correctly retrieving the binding expression.
* To solve this problem, we introduce the `ngChecked` directive.
* @example
<doc:example>
<doc:source>
Check me to check both: <input type="checkbox" ng-model="master"><br/>
<input id="checkSlave" type="checkbox" ng-checked="master">
</doc:source>
<doc:scenario>
it('should check both checkBoxes', function() {
expect(element('.doc-example-live #checkSlave').prop('checked')).toBeFalsy();
input('master').check();
expect(element('.doc-example-live #checkSlave').prop('checked')).toBeTruthy();
});
</doc:scenario>
</doc:example>
*
* @element INPUT
* @param {expression} ngChecked Angular expression that will be evaluated.
*/
/**
* @ngdoc directive
* @name ng.directive:ngReadonly
* @restrict A
*
* @description
* The HTML specs do not require browsers to preserve the special attributes such as readonly.
* (The presence of them means true and absence means false)
* This prevents the angular compiler from correctly retrieving the binding expression.
* To solve this problem, we introduce the `ngReadonly` directive.
* @example
<doc:example>
<doc:source>
Check me to make text readonly: <input type="checkbox" ng-model="checked"><br/>
<input type="text" ng-readonly="checked" value="I'm Angular"/>
</doc:source>
<doc:scenario>
it('should toggle readonly attr', function() {
expect(element('.doc-example-live :text').prop('readonly')).toBeFalsy();
input('checked').check();
expect(element('.doc-example-live :text').prop('readonly')).toBeTruthy();
});
</doc:scenario>
</doc:example>
*
* @element INPUT
* @param {string} expression Angular expression that will be evaluated.
*/
/**
* @ngdoc directive
* @name ng.directive:ngSelected
* @restrict A
*
* @description
* The HTML specs do not require browsers to preserve the special attributes such as selected.
* (The presence of them means true and absence means false)
* This prevents the angular compiler from correctly retrieving the binding expression.
* To solve this problem, we introduced the `ngSelected` directive.
* @example
<doc:example>
<doc:source>
Check me to select: <input type="checkbox" ng-model="selected"><br/>
<select>
<option>Hello!</option>
<option id="greet" ng-selected="selected">Greetings!</option>
</select>
</doc:source>
<doc:scenario>
it('should select Greetings!', function() {
expect(element('.doc-example-live #greet').prop('selected')).toBeFalsy();
input('selected').check();
expect(element('.doc-example-live #greet').prop('selected')).toBeTruthy();
});
</doc:scenario>
</doc:example>
*
* @element OPTION
* @param {string} expression Angular expression that will be evaluated.
*/
/**
* @ngdoc directive
* @name ng.directive:ngOpen
* @restrict A
*
* @description
* The HTML specs do not require browsers to preserve the special attributes such as open.
* (The presence of them means true and absence means false)
* This prevents the angular compiler from correctly retrieving the binding expression.
* To solve this problem, we introduce the `ngOpen` directive.
*
* @example
<doc:example>
<doc:source>
Check me check multiple: <input type="checkbox" ng-model="open"><br/>
<details id="details" ng-open="open">
<summary>Show/Hide me</summary>
</details>
</doc:source>
<doc:scenario>
it('should toggle open', function() {
expect(element('#details').prop('open')).toBeFalsy();
input('open').check();
expect(element('#details').prop('open')).toBeTruthy();
});
</doc:scenario>
</doc:example>
*
* @element DETAILS
* @param {string} expression Angular expression that will be evaluated.
*/
var ngAttributeAliasDirectives = {};
// boolean attrs are evaluated
forEach(BOOLEAN_ATTR, function(propName, attrName) {
// binding to multiple is not supported
if (propName == "multiple") return;
var normalized = directiveNormalize('ng-' + attrName);
ngAttributeAliasDirectives[normalized] = function() {
return {
priority: 100,
compile: function() {
return function(scope, element, attr) {
scope.$watch(attr[normalized], function ngBooleanAttrWatchAction(value) {
attr.$set(attrName, !!value);
});
};
}
};
};
});
// ng-src, ng-srcset, ng-href are interpolated
forEach(['src', 'srcset', 'href'], function(attrName) {
var normalized = directiveNormalize('ng-' + attrName);
ngAttributeAliasDirectives[normalized] = function() {
return {
priority: 99, // it needs to run after the attributes are interpolated
link: function(scope, element, attr) {
attr.$observe(normalized, function(value) {
if (!value)
return;
attr.$set(attrName, value);
// on IE, if "ng:src" directive declaration is used and "src" attribute doesn't exist
// then calling element.setAttribute('src', 'foo') doesn't do anything, so we need
// to set the property as well to achieve the desired effect.
// we use attr[attrName] value since $set can sanitize the url.
if (msie) element.prop(attrName, attr[attrName]);
});
}
};
};
});
var nullFormCtrl = {
$addControl: noop,
$removeControl: noop,
$setValidity: noop,
$setDirty: noop,
$setPristine: noop
};
/**
* @ngdoc object
* @name ng.directive:form.FormController
*
* @property {boolean} $pristine True if user has not interacted with the form yet.
* @property {boolean} $dirty True if user has already interacted with the form.
* @property {boolean} $valid True if all of the containing forms and controls are valid.
* @property {boolean} $invalid True if at least one containing control or form is invalid.
*
* @property {Object} $error Is an object hash, containing references to all invalid controls or
* forms, where:
*
* - keys are validation tokens (error names) — such as `required`, `url` or `email`),
* - values are arrays of controls or forms that are invalid with given error.
*
* @description
* `FormController` keeps track of all its controls and nested forms as well as state of them,
* such as being valid/invalid or dirty/pristine.
*
* Each {@link ng.directive:form form} directive creates an instance
* of `FormController`.
*
*/
//asks for $scope to fool the BC controller module
FormController.$inject = ['$element', '$attrs', '$scope'];
function FormController(element, attrs) {
var form = this,
parentForm = element.parent().controller('form') || nullFormCtrl,
invalidCount = 0, // used to easily determine if we are valid
errors = form.$error = {},
controls = [];
// init state
form.$name = attrs.name || attrs.ngForm;
form.$dirty = false;
form.$pristine = true;
form.$valid = true;
form.$invalid = false;
parentForm.$addControl(form);
// Setup initial state of the control
element.addClass(PRISTINE_CLASS);
toggleValidCss(true);
// convenience method for easy toggling of classes
function toggleValidCss(isValid, validationErrorKey) {
validationErrorKey = validationErrorKey ? '-' + snake_case(validationErrorKey, '-') : '';
element.
removeClass((isValid ? INVALID_CLASS : VALID_CLASS) + validationErrorKey).
addClass((isValid ? VALID_CLASS : INVALID_CLASS) + validationErrorKey);
}
/**
* @ngdoc function
* @name ng.directive:form.FormController#$addControl
* @methodOf ng.directive:form.FormController
*
* @description
* Register a control with the form.
*
* Input elements using ngModelController do this automatically when they are linked.
*/
form.$addControl = function(control) {
controls.push(control);
if (control.$name && !form.hasOwnProperty(control.$name)) {
form[control.$name] = control;
}
};
/**
* @ngdoc function
* @name ng.directive:form.FormController#$removeControl
* @methodOf ng.directive:form.FormController
*
* @description
* Deregister a control from the form.
*
* Input elements using ngModelController do this automatically when they are destroyed.
*/
form.$removeControl = function(control) {
if (control.$name && form[control.$name] === control) {
delete form[control.$name];
}
forEach(errors, function(queue, validationToken) {
form.$setValidity(validationToken, true, control);
});
arrayRemove(controls, control);
};
/**
* @ngdoc function
* @name ng.directive:form.FormController#$setValidity
* @methodOf ng.directive:form.FormController
*
* @description
* Sets the validity of a form control.
*
* This method will also propagate to parent forms.
*/
form.$setValidity = function(validationToken, isValid, control) {
var queue = errors[validationToken];
if (isValid) {
if (queue) {
arrayRemove(queue, control);
if (!queue.length) {
invalidCount--;
if (!invalidCount) {
toggleValidCss(isValid);
form.$valid = true;
form.$invalid = false;
}
errors[validationToken] = false;
toggleValidCss(true, validationToken);
parentForm.$setValidity(validationToken, true, form);
}
}
} else {
if (!invalidCount) {
toggleValidCss(isValid);
}
if (queue) {
if (includes(queue, control)) return;
} else {
errors[validationToken] = queue = [];
invalidCount++;
toggleValidCss(false, validationToken);
parentForm.$setValidity(validationToken, false, form);
}
queue.push(control);
form.$valid = false;
form.$invalid = true;
}
};
/**
* @ngdoc function
* @name ng.directive:form.FormController#$setDirty
* @methodOf ng.directive:form.FormController
*
* @description
* Sets the form to a dirty state.
*
* This method can be called to add the 'ng-dirty' class and set the form to a dirty
* state (ng-dirty class). This method will also propagate to parent forms.
*/
form.$setDirty = function() {
element.removeClass(PRISTINE_CLASS).addClass(DIRTY_CLASS);
form.$dirty = true;
form.$pristine = false;
parentForm.$setDirty();
};
/**
* @ngdoc function
* @name ng.directive:form.FormController#$setPristine
* @methodOf ng.directive:form.FormController
*
* @description
* Sets the form to its pristine state.
*
* This method can be called to remove the 'ng-dirty' class and set the form to its pristine
* state (ng-pristine class). This method will also propagate to all the controls contained
* in this form.
*
* Setting a form back to a pristine state is often useful when we want to 'reuse' a form after
* saving or resetting it.
*/
form.$setPristine = function () {
element.removeClass(DIRTY_CLASS).addClass(PRISTINE_CLASS);
form.$dirty = false;
form.$pristine = true;
forEach(controls, function(control) {
control.$setPristine();
});
};
}
/**
* @ngdoc directive
* @name ng.directive:ngForm
* @restrict EAC
*
* @description
* Nestable alias of {@link ng.directive:form `form`} directive. HTML
* does not allow nesting of form elements. It is useful to nest forms, for example if the validity of a
* sub-group of controls needs to be determined.
*
* @param {string=} name|ngForm Name of the form. If specified, the form controller will be published into
* related scope, under this name.
*
*/
/**
* @ngdoc directive
* @name ng.directive:form
* @restrict E
*
* @description
* Directive that instantiates
* {@link ng.directive:form.FormController FormController}.
*
* If `name` attribute is specified, the form controller is published onto the current scope under
* this name.
*
* # Alias: {@link ng.directive:ngForm `ngForm`}
*
* In angular forms can be nested. This means that the outer form is valid when all of the child
* forms are valid as well. However browsers do not allow nesting of `<form>` elements, for this
* reason angular provides {@link ng.directive:ngForm `ngForm`} alias
* which behaves identical to `<form>` but allows form nesting.
*
*
* # CSS classes
* - `ng-valid` Is set if the form is valid.
* - `ng-invalid` Is set if the form is invalid.
* - `ng-pristine` Is set if the form is pristine.
* - `ng-dirty` Is set if the form is dirty.
*
*
* # Submitting a form and preventing default action
*
* Since the role of forms in client-side Angular applications is different than in classical
* roundtrip apps, it is desirable for the browser not to translate the form submission into a full
* page reload that sends the data to the server. Instead some javascript logic should be triggered
* to handle the form submission in application specific way.
*
* For this reason, Angular prevents the default action (form submission to the server) unless the
* `<form>` element has an `action` attribute specified.
*
* You can use one of the following two ways to specify what javascript method should be called when
* a form is submitted:
*
* - {@link ng.directive:ngSubmit ngSubmit} directive on the form element
* - {@link ng.directive:ngClick ngClick} directive on the first
* button or input field of type submit (input[type=submit])
*
* To prevent double execution of the handler, use only one of ngSubmit or ngClick directives. This
* is because of the following form submission rules coming from the html spec:
*
* - If a form has only one input field then hitting enter in this field triggers form submit
* (`ngSubmit`)
* - if a form has has 2+ input fields and no buttons or input[type=submit] then hitting enter
* doesn't trigger submit
* - if a form has one or more input fields and one or more buttons or input[type=submit] then
* hitting enter in any of the input fields will trigger the click handler on the *first* button or
* input[type=submit] (`ngClick`) *and* a submit handler on the enclosing form (`ngSubmit`)
*
* @param {string=} name Name of the form. If specified, the form controller will be published into
* related scope, under this name.
*
* @example
<doc:example>
<doc:source>
<script>
function Ctrl($scope) {
$scope.userType = 'guest';
}
</script>
<form name="myForm" ng-controller="Ctrl">
userType: <input name="input" ng-model="userType" required>
<span class="error" ng-show="myForm.input.$error.required">Required!</span><br>
<tt>userType = {{userType}}</tt><br>
<tt>myForm.input.$valid = {{myForm.input.$valid}}</tt><br>
<tt>myForm.input.$error = {{myForm.input.$error}}</tt><br>
<tt>myForm.$valid = {{myForm.$valid}}</tt><br>
<tt>myForm.$error.required = {{!!myForm.$error.required}}</tt><br>
</form>
</doc:source>
<doc:scenario>
it('should initialize to model', function() {
expect(binding('userType')).toEqual('guest');
expect(binding('myForm.input.$valid')).toEqual('true');
});
it('should be invalid if empty', function() {
input('userType').enter('');
expect(binding('userType')).toEqual('');
expect(binding('myForm.input.$valid')).toEqual('false');
});
</doc:scenario>
</doc:example>
*/
var formDirectiveFactory = function(isNgForm) {
return ['$timeout', function($timeout) {
var formDirective = {
name: 'form',
restrict: 'E',
controller: FormController,
compile: function() {
return {
pre: function(scope, formElement, attr, controller) {
if (!attr.action) {
// we can't use jq events because if a form is destroyed during submission the default
// action is not prevented. see #1238
//
// IE 9 is not affected because it doesn't fire a submit event and try to do a full
// page reload if the form was destroyed by submission of the form via a click handler
// on a button in the form. Looks like an IE9 specific bug.
var preventDefaultListener = function(event) {
event.preventDefault
? event.preventDefault()
: event.returnValue = false; // IE
};
addEventListenerFn(formElement[0], 'submit', preventDefaultListener);
// unregister the preventDefault listener so that we don't not leak memory but in a
// way that will achieve the prevention of the default action.
formElement.on('$destroy', function() {
$timeout(function() {
removeEventListenerFn(formElement[0], 'submit', preventDefaultListener);
}, 0, false);
});
}
var parentFormCtrl = formElement.parent().controller('form'),
alias = attr.name || attr.ngForm;
if (alias) {
setter(scope, alias, controller, alias);
}
if (parentFormCtrl) {
formElement.on('$destroy', function() {
parentFormCtrl.$removeControl(controller);
if (alias) {
setter(scope, alias, undefined, alias);
}
extend(controller, nullFormCtrl); //stop propagating child destruction handlers upwards
});
}
}
};
}
};
return isNgForm ? extend(copy(formDirective), {restrict: 'EAC'}) : formDirective;
}];
};
var formDirective = formDirectiveFactory();
var ngFormDirective = formDirectiveFactory(true);
var URL_REGEXP = /^(ftp|http|https):\/\/(\w+:{0,1}\w*@)?(\S+)(:[0-9]+)?(\/|\/([\w#!:.?+=&%@!\-\/]))?$/;
var EMAIL_REGEXP = /^[A-Za-z0-9._%+-]+@[A-Za-z0-9.-]+\.[A-Za-z]{2,6}$/;
var NUMBER_REGEXP = /^\s*(\-|\+)?(\d+|(\d*(\.\d*)))\s*$/;
var inputType = {
/**
* @ngdoc inputType
* @name ng.directive:input.text
*
* @description
* Standard HTML text input with angular data binding.
*
* @param {string} ngModel Assignable angular expression to data-bind to.
* @param {string=} name Property name of the form under which the control is published.
* @param {string=} required Adds `required` validation error key if the value is not entered.
* @param {string=} ngRequired Adds `required` attribute and `required` validation constraint to
* the element when the ngRequired expression evaluates to true. Use `ngRequired` instead of
* `required` when you want to data-bind to the `required` attribute.
* @param {number=} ngMinlength Sets `minlength` validation error key if the value is shorter than
* minlength.
* @param {number=} ngMaxlength Sets `maxlength` validation error key if the value is longer than
* maxlength.
* @param {string=} ngPattern Sets `pattern` validation error key if the value does not match the
* RegExp pattern expression. Expected value is `/regexp/` for inline patterns or `regexp` for
* patterns defined as scope expressions.
* @param {string=} ngChange Angular expression to be executed when input changes due to user
* interaction with the input element.
* @param {boolean=} [ngTrim=true] If set to false Angular will not automatically trimming the
* input.
*
* @example
<doc:example>
<doc:source>
<script>
function Ctrl($scope) {
$scope.text = 'guest';
$scope.word = /^\s*\w*\s*$/;
}
</script>
<form name="myForm" ng-controller="Ctrl">
Single word: <input type="text" name="input" ng-model="text"
ng-pattern="word" required ng-trim="false">
<span class="error" ng-show="myForm.input.$error.required">
Required!</span>
<span class="error" ng-show="myForm.input.$error.pattern">
Single word only!</span>
<tt>text = {{text}}</tt><br/>
<tt>myForm.input.$valid = {{myForm.input.$valid}}</tt><br/>
<tt>myForm.input.$error = {{myForm.input.$error}}</tt><br/>
<tt>myForm.$valid = {{myForm.$valid}}</tt><br/>
<tt>myForm.$error.required = {{!!myForm.$error.required}}</tt><br/>
</form>
</doc:source>
<doc:scenario>
it('should initialize to model', function() {
expect(binding('text')).toEqual('guest');
expect(binding('myForm.input.$valid')).toEqual('true');
});
it('should be invalid if empty', function() {
input('text').enter('');
expect(binding('text')).toEqual('');
expect(binding('myForm.input.$valid')).toEqual('false');
});
it('should be invalid if multi word', function() {
input('text').enter('hello world');
expect(binding('myForm.input.$valid')).toEqual('false');
});
it('should not be trimmed', function() {
input('text').enter('untrimmed ');
expect(binding('text')).toEqual('untrimmed ');
expect(binding('myForm.input.$valid')).toEqual('true');
});
</doc:scenario>
</doc:example>
*/
'text': textInputType,
/**
* @ngdoc inputType
* @name ng.directive:input.number
*
* @description
* Text input with number validation and transformation. Sets the `number` validation
* error if not a valid number.
*
* @param {string} ngModel Assignable angular expression to data-bind to.
* @param {string=} name Property name of the form under which the control is published.
* @param {string=} min Sets the `min` validation error key if the value entered is less than `min`.
* @param {string=} max Sets the `max` validation error key if the value entered is greater than `max`.
* @param {string=} required Sets `required` validation error key if the value is not entered.
* @param {string=} ngRequired Adds `required` attribute and `required` validation constraint to
* the element when the ngRequired expression evaluates to true. Use `ngRequired` instead of
* `required` when you want to data-bind to the `required` attribute.
* @param {number=} ngMinlength Sets `minlength` validation error key if the value is shorter than
* minlength.
* @param {number=} ngMaxlength Sets `maxlength` validation error key if the value is longer than
* maxlength.
* @param {string=} ngPattern Sets `pattern` validation error key if the value does not match the
* RegExp pattern expression. Expected value is `/regexp/` for inline patterns or `regexp` for
* patterns defined as scope expressions.
* @param {string=} ngChange Angular expression to be executed when input changes due to user
* interaction with the input element.
*
* @example
<doc:example>
<doc:source>
<script>
function Ctrl($scope) {
$scope.value = 12;
}
</script>
<form name="myForm" ng-controller="Ctrl">
Number: <input type="number" name="input" ng-model="value"
min="0" max="99" required>
<span class="error" ng-show="myForm.input.$error.required">
Required!</span>
<span class="error" ng-show="myForm.input.$error.number">
Not valid number!</span>
<tt>value = {{value}}</tt><br/>
<tt>myForm.input.$valid = {{myForm.input.$valid}}</tt><br/>
<tt>myForm.input.$error = {{myForm.input.$error}}</tt><br/>
<tt>myForm.$valid = {{myForm.$valid}}</tt><br/>
<tt>myForm.$error.required = {{!!myForm.$error.required}}</tt><br/>
</form>
</doc:source>
<doc:scenario>
it('should initialize to model', function() {
expect(binding('value')).toEqual('12');
expect(binding('myForm.input.$valid')).toEqual('true');
});
it('should be invalid if empty', function() {
input('value').enter('');
expect(binding('value')).toEqual('');
expect(binding('myForm.input.$valid')).toEqual('false');
});
it('should be invalid if over max', function() {
input('value').enter('123');
expect(binding('value')).toEqual('');
expect(binding('myForm.input.$valid')).toEqual('false');
});
</doc:scenario>
</doc:example>
*/
'number': numberInputType,
/**
* @ngdoc inputType
* @name ng.directive:input.url
*
* @description
* Text input with URL validation. Sets the `url` validation error key if the content is not a
* valid URL.
*
* @param {string} ngModel Assignable angular expression to data-bind to.
* @param {string=} name Property name of the form under which the control is published.
* @param {string=} required Sets `required` validation error key if the value is not entered.
* @param {string=} ngRequired Adds `required` attribute and `required` validation constraint to
* the element when the ngRequired expression evaluates to true. Use `ngRequired` instead of
* `required` when you want to data-bind to the `required` attribute.
* @param {number=} ngMinlength Sets `minlength` validation error key if the value is shorter than
* minlength.
* @param {number=} ngMaxlength Sets `maxlength` validation error key if the value is longer than
* maxlength.
* @param {string=} ngPattern Sets `pattern` validation error key if the value does not match the
* RegExp pattern expression. Expected value is `/regexp/` for inline patterns or `regexp` for
* patterns defined as scope expressions.
* @param {string=} ngChange Angular expression to be executed when input changes due to user
* interaction with the input element.
*
* @example
<doc:example>
<doc:source>
<script>
function Ctrl($scope) {
$scope.text = 'http://google.com';
}
</script>
<form name="myForm" ng-controller="Ctrl">
URL: <input type="url" name="input" ng-model="text" required>
<span class="error" ng-show="myForm.input.$error.required">
Required!</span>
<span class="error" ng-show="myForm.input.$error.url">
Not valid url!</span>
<tt>text = {{text}}</tt><br/>
<tt>myForm.input.$valid = {{myForm.input.$valid}}</tt><br/>
<tt>myForm.input.$error = {{myForm.input.$error}}</tt><br/>
<tt>myForm.$valid = {{myForm.$valid}}</tt><br/>
<tt>myForm.$error.required = {{!!myForm.$error.required}}</tt><br/>
<tt>myForm.$error.url = {{!!myForm.$error.url}}</tt><br/>
</form>
</doc:source>
<doc:scenario>
it('should initialize to model', function() {
expect(binding('text')).toEqual('http://google.com');
expect(binding('myForm.input.$valid')).toEqual('true');
});
it('should be invalid if empty', function() {
input('text').enter('');
expect(binding('text')).toEqual('');
expect(binding('myForm.input.$valid')).toEqual('false');
});
it('should be invalid if not url', function() {
input('text').enter('xxx');
expect(binding('myForm.input.$valid')).toEqual('false');
});
</doc:scenario>
</doc:example>
*/
'url': urlInputType,
/**
* @ngdoc inputType
* @name ng.directive:input.email
*
* @description
* Text input with email validation. Sets the `email` validation error key if not a valid email
* address.
*
* @param {string} ngModel Assignable angular expression to data-bind to.
* @param {string=} name Property name of the form under which the control is published.
* @param {string=} required Sets `required` validation error key if the value is not entered.
* @param {string=} ngRequired Adds `required` attribute and `required` validation constraint to
* the element when the ngRequired expression evaluates to true. Use `ngRequired` instead of
* `required` when you want to data-bind to the `required` attribute.
* @param {number=} ngMinlength Sets `minlength` validation error key if the value is shorter than
* minlength.
* @param {number=} ngMaxlength Sets `maxlength` validation error key if the value is longer than
* maxlength.
* @param {string=} ngPattern Sets `pattern` validation error key if the value does not match the
* RegExp pattern expression. Expected value is `/regexp/` for inline patterns or `regexp` for
* patterns defined as scope expressions.
* @param {string=} ngChange Angular expression to be executed when input changes due to user
* interaction with the input element.
*
* @example
<doc:example>
<doc:source>
<script>
function Ctrl($scope) {
$scope.text = 'me@example.com';
}
</script>
<form name="myForm" ng-controller="Ctrl">
Email: <input type="email" name="input" ng-model="text" required>
<span class="error" ng-show="myForm.input.$error.required">
Required!</span>
<span class="error" ng-show="myForm.input.$error.email">
Not valid email!</span>
<tt>text = {{text}}</tt><br/>
<tt>myForm.input.$valid = {{myForm.input.$valid}}</tt><br/>
<tt>myForm.input.$error = {{myForm.input.$error}}</tt><br/>
<tt>myForm.$valid = {{myForm.$valid}}</tt><br/>
<tt>myForm.$error.required = {{!!myForm.$error.required}}</tt><br/>
<tt>myForm.$error.email = {{!!myForm.$error.email}}</tt><br/>
</form>
</doc:source>
<doc:scenario>
it('should initialize to model', function() {
expect(binding('text')).toEqual('me@example.com');
expect(binding('myForm.input.$valid')).toEqual('true');
});
it('should be invalid if empty', function() {
input('text').enter('');
expect(binding('text')).toEqual('');
expect(binding('myForm.input.$valid')).toEqual('false');
});
it('should be invalid if not email', function() {
input('text').enter('xxx');
expect(binding('myForm.input.$valid')).toEqual('false');
});
</doc:scenario>
</doc:example>
*/
'email': emailInputType,
/**
* @ngdoc inputType
* @name ng.directive:input.radio
*
* @description
* HTML radio button.
*
* @param {string} ngModel Assignable angular expression to data-bind to.
* @param {string} value The value to which the expression should be set when selected.
* @param {string=} name Property name of the form under which the control is published.
* @param {string=} ngChange Angular expression to be executed when input changes due to user
* interaction with the input element.
*
* @example
<doc:example>
<doc:source>
<script>
function Ctrl($scope) {
$scope.color = 'blue';
}
</script>
<form name="myForm" ng-controller="Ctrl">
<input type="radio" ng-model="color" value="red"> Red <br/>
<input type="radio" ng-model="color" value="green"> Green <br/>
<input type="radio" ng-model="color" value="blue"> Blue <br/>
<tt>color = {{color}}</tt><br/>
</form>
</doc:source>
<doc:scenario>
it('should change state', function() {
expect(binding('color')).toEqual('blue');
input('color').select('red');
expect(binding('color')).toEqual('red');
});
</doc:scenario>
</doc:example>
*/
'radio': radioInputType,
/**
* @ngdoc inputType
* @name ng.directive:input.checkbox
*
* @description
* HTML checkbox.
*
* @param {string} ngModel Assignable angular expression to data-bind to.
* @param {string=} name Property name of the form under which the control is published.
* @param {string=} ngTrueValue The value to which the expression should be set when selected.
* @param {string=} ngFalseValue The value to which the expression should be set when not selected.
* @param {string=} ngChange Angular expression to be executed when input changes due to user
* interaction with the input element.
*
* @example
<doc:example>
<doc:source>
<script>
function Ctrl($scope) {
$scope.value1 = true;
$scope.value2 = 'YES'
}
</script>
<form name="myForm" ng-controller="Ctrl">
Value1: <input type="checkbox" ng-model="value1"> <br/>
Value2: <input type="checkbox" ng-model="value2"
ng-true-value="YES" ng-false-value="NO"> <br/>
<tt>value1 = {{value1}}</tt><br/>
<tt>value2 = {{value2}}</tt><br/>
</form>
</doc:source>
<doc:scenario>
it('should change state', function() {
expect(binding('value1')).toEqual('true');
expect(binding('value2')).toEqual('YES');
input('value1').check();
input('value2').check();
expect(binding('value1')).toEqual('false');
expect(binding('value2')).toEqual('NO');
});
</doc:scenario>
</doc:example>
*/
'checkbox': checkboxInputType,
'hidden': noop,
'button': noop,
'submit': noop,
'reset': noop
};
function isEmpty(value) {
return isUndefined(value) || value === '' || value === null || value !== value;
}
function textInputType(scope, element, attr, ctrl, $sniffer, $browser) {
var listener = function() {
var value = element.val();
// By default we will trim the value
// If the attribute ng-trim exists we will avoid trimming
// e.g. <input ng-model="foo" ng-trim="false">
if (toBoolean(attr.ngTrim || 'T')) {
value = trim(value);
}
if (ctrl.$viewValue !== value) {
scope.$apply(function() {
ctrl.$setViewValue(value);
});
}
};
// if the browser does support "input" event, we are fine - except on IE9 which doesn't fire the
// input event on backspace, delete or cut
if ($sniffer.hasEvent('input')) {
element.on('input', listener);
} else {
var timeout;
var deferListener = function() {
if (!timeout) {
timeout = $browser.defer(function() {
listener();
timeout = null;
});
}
};
element.on('keydown', function(event) {
var key = event.keyCode;
// ignore
// command modifiers arrows
if (key === 91 || (15 < key && key < 19) || (37 <= key && key <= 40)) return;
deferListener();
});
// if user paste into input using mouse, we need "change" event to catch it
element.on('change', listener);
// if user modifies input value using context menu in IE, we need "paste" and "cut" events to catch it
if ($sniffer.hasEvent('paste')) {
element.on('paste cut', deferListener);
}
}
ctrl.$render = function() {
element.val(isEmpty(ctrl.$viewValue) ? '' : ctrl.$viewValue);
};
// pattern validator
var pattern = attr.ngPattern,
patternValidator,
match;
var validate = function(regexp, value) {
if (isEmpty(value) || regexp.test(value)) {
ctrl.$setValidity('pattern', true);
return value;
} else {
ctrl.$setValidity('pattern', false);
return undefined;
}
};
if (pattern) {
match = pattern.match(/^\/(.*)\/([gim]*)$/);
if (match) {
pattern = new RegExp(match[1], match[2]);
patternValidator = function(value) {
return validate(pattern, value)
};
} else {
patternValidator = function(value) {
var patternObj = scope.$eval(pattern);
if (!patternObj || !patternObj.test) {
throw minErr('ngPattern')('noregexp',
'Expected {0} to be a RegExp but was {1}. Element: {2}', pattern,
patternObj, startingTag(element));
}
return validate(patternObj, value);
};
}
ctrl.$formatters.push(patternValidator);
ctrl.$parsers.push(patternValidator);
}
// min length validator
if (attr.ngMinlength) {
var minlength = int(attr.ngMinlength);
var minLengthValidator = function(value) {
if (!isEmpty(value) && value.length < minlength) {
ctrl.$setValidity('minlength', false);
return undefined;
} else {
ctrl.$setValidity('minlength', true);
return value;
}
};
ctrl.$parsers.push(minLengthValidator);
ctrl.$formatters.push(minLengthValidator);
}
// max length validator
if (attr.ngMaxlength) {
var maxlength = int(attr.ngMaxlength);
var maxLengthValidator = function(value) {
if (!isEmpty(value) && value.length > maxlength) {
ctrl.$setValidity('maxlength', false);
return undefined;
} else {
ctrl.$setValidity('maxlength', true);
return value;
}
};
ctrl.$parsers.push(maxLengthValidator);
ctrl.$formatters.push(maxLengthValidator);
}
}
function numberInputType(scope, element, attr, ctrl, $sniffer, $browser) {
textInputType(scope, element, attr, ctrl, $sniffer, $browser);
ctrl.$parsers.push(function(value) {
var empty = isEmpty(value);
if (empty || NUMBER_REGEXP.test(value)) {
ctrl.$setValidity('number', true);
return value === '' ? null : (empty ? value : parseFloat(value));
} else {
ctrl.$setValidity('number', false);
return undefined;
}
});
ctrl.$formatters.push(function(value) {
return isEmpty(value) ? '' : '' + value;
});
if (attr.min) {
var min = parseFloat(attr.min);
var minValidator = function(value) {
if (!isEmpty(value) && value < min) {
ctrl.$setValidity('min', false);
return undefined;
} else {
ctrl.$setValidity('min', true);
return value;
}
};
ctrl.$parsers.push(minValidator);
ctrl.$formatters.push(minValidator);
}
if (attr.max) {
var max = parseFloat(attr.max);
var maxValidator = function(value) {
if (!isEmpty(value) && value > max) {
ctrl.$setValidity('max', false);
return undefined;
} else {
ctrl.$setValidity('max', true);
return value;
}
};
ctrl.$parsers.push(maxValidator);
ctrl.$formatters.push(maxValidator);
}
ctrl.$formatters.push(function(value) {
if (isEmpty(value) || isNumber(value)) {
ctrl.$setValidity('number', true);
return value;
} else {
ctrl.$setValidity('number', false);
return undefined;
}
});
}
function urlInputType(scope, element, attr, ctrl, $sniffer, $browser) {
textInputType(scope, element, attr, ctrl, $sniffer, $browser);
var urlValidator = function(value) {
if (isEmpty(value) || URL_REGEXP.test(value)) {
ctrl.$setValidity('url', true);
return value;
} else {
ctrl.$setValidity('url', false);
return undefined;
}
};
ctrl.$formatters.push(urlValidator);
ctrl.$parsers.push(urlValidator);
}
function emailInputType(scope, element, attr, ctrl, $sniffer, $browser) {
textInputType(scope, element, attr, ctrl, $sniffer, $browser);
var emailValidator = function(value) {
if (isEmpty(value) || EMAIL_REGEXP.test(value)) {
ctrl.$setValidity('email', true);
return value;
} else {
ctrl.$setValidity('email', false);
return undefined;
}
};
ctrl.$formatters.push(emailValidator);
ctrl.$parsers.push(emailValidator);
}
function radioInputType(scope, element, attr, ctrl) {
// make the name unique, if not defined
if (isUndefined(attr.name)) {
element.attr('name', nextUid());
}
element.on('click', function() {
if (element[0].checked) {
scope.$apply(function() {
ctrl.$setViewValue(attr.value);
});
}
});
ctrl.$render = function() {
var value = attr.value;
element[0].checked = (value == ctrl.$viewValue);
};
attr.$observe('value', ctrl.$render);
}
function checkboxInputType(scope, element, attr, ctrl) {
var trueValue = attr.ngTrueValue,
falseValue = attr.ngFalseValue;
if (!isString(trueValue)) trueValue = true;
if (!isString(falseValue)) falseValue = false;
element.on('click', function() {
scope.$apply(function() {
ctrl.$setViewValue(element[0].checked);
});
});
ctrl.$render = function() {
element[0].checked = ctrl.$viewValue;
};
ctrl.$formatters.push(function(value) {
return value === trueValue;
});
ctrl.$parsers.push(function(value) {
return value ? trueValue : falseValue;
});
}
/**
* @ngdoc directive
* @name ng.directive:textarea
* @restrict E
*
* @description
* HTML textarea element control with angular data-binding. The data-binding and validation
* properties of this element are exactly the same as those of the
* {@link ng.directive:input input element}.
*
* @param {string} ngModel Assignable angular expression to data-bind to.
* @param {string=} name Property name of the form under which the control is published.
* @param {string=} required Sets `required` validation error key if the value is not entered.
* @param {string=} ngRequired Adds `required` attribute and `required` validation constraint to
* the element when the ngRequired expression evaluates to true. Use `ngRequired` instead of
* `required` when you want to data-bind to the `required` attribute.
* @param {number=} ngMinlength Sets `minlength` validation error key if the value is shorter than
* minlength.
* @param {number=} ngMaxlength Sets `maxlength` validation error key if the value is longer than
* maxlength.
* @param {string=} ngPattern Sets `pattern` validation error key if the value does not match the
* RegExp pattern expression. Expected value is `/regexp/` for inline patterns or `regexp` for
* patterns defined as scope expressions.
* @param {string=} ngChange Angular expression to be executed when input changes due to user
* interaction with the input element.
*/
/**
* @ngdoc directive
* @name ng.directive:input
* @restrict E
*
* @description
* HTML input element control with angular data-binding. Input control follows HTML5 input types
* and polyfills the HTML5 validation behavior for older browsers.
*
* @param {string} ngModel Assignable angular expression to data-bind to.
* @param {string=} name Property name of the form under which the control is published.
* @param {string=} required Sets `required` validation error key if the value is not entered.
* @param {boolean=} ngRequired Sets `required` attribute if set to true
* @param {number=} ngMinlength Sets `minlength` validation error key if the value is shorter than
* minlength.
* @param {number=} ngMaxlength Sets `maxlength` validation error key if the value is longer than
* maxlength.
* @param {string=} ngPattern Sets `pattern` validation error key if the value does not match the
* RegExp pattern expression. Expected value is `/regexp/` for inline patterns or `regexp` for
* patterns defined as scope expressions.
* @param {string=} ngChange Angular expression to be executed when input changes due to user
* interaction with the input element.
*
* @example
<doc:example>
<doc:source>
<script>
function Ctrl($scope) {
$scope.user = {name: 'guest', last: 'visitor'};
}
</script>
<div ng-controller="Ctrl">
<form name="myForm">
User name: <input type="text" name="userName" ng-model="user.name" required>
<span class="error" ng-show="myForm.userName.$error.required">
Required!</span><br>
Last name: <input type="text" name="lastName" ng-model="user.last"
ng-minlength="3" ng-maxlength="10">
<span class="error" ng-show="myForm.lastName.$error.minlength">
Too short!</span>
<span class="error" ng-show="myForm.lastName.$error.maxlength">
Too long!</span><br>
</form>
<hr>
<tt>user = {{user}}</tt><br/>
<tt>myForm.userName.$valid = {{myForm.userName.$valid}}</tt><br>
<tt>myForm.userName.$error = {{myForm.userName.$error}}</tt><br>
<tt>myForm.lastName.$valid = {{myForm.lastName.$valid}}</tt><br>
<tt>myForm.lastName.$error = {{myForm.lastName.$error}}</tt><br>
<tt>myForm.$valid = {{myForm.$valid}}</tt><br>
<tt>myForm.$error.required = {{!!myForm.$error.required}}</tt><br>
<tt>myForm.$error.minlength = {{!!myForm.$error.minlength}}</tt><br>
<tt>myForm.$error.maxlength = {{!!myForm.$error.maxlength}}</tt><br>
</div>
</doc:source>
<doc:scenario>
it('should initialize to model', function() {
expect(binding('user')).toEqual('{"name":"guest","last":"visitor"}');
expect(binding('myForm.userName.$valid')).toEqual('true');
expect(binding('myForm.$valid')).toEqual('true');
});
it('should be invalid if empty when required', function() {
input('user.name').enter('');
expect(binding('user')).toEqual('{"last":"visitor"}');
expect(binding('myForm.userName.$valid')).toEqual('false');
expect(binding('myForm.$valid')).toEqual('false');
});
it('should be valid if empty when min length is set', function() {
input('user.last').enter('');
expect(binding('user')).toEqual('{"name":"guest","last":""}');
expect(binding('myForm.lastName.$valid')).toEqual('true');
expect(binding('myForm.$valid')).toEqual('true');
});
it('should be invalid if less than required min length', function() {
input('user.last').enter('xx');
expect(binding('user')).toEqual('{"name":"guest"}');
expect(binding('myForm.lastName.$valid')).toEqual('false');
expect(binding('myForm.lastName.$error')).toMatch(/minlength/);
expect(binding('myForm.$valid')).toEqual('false');
});
it('should be invalid if longer than max length', function() {
input('user.last').enter('some ridiculously long name');
expect(binding('user'))
.toEqual('{"name":"guest"}');
expect(binding('myForm.lastName.$valid')).toEqual('false');
expect(binding('myForm.lastName.$error')).toMatch(/maxlength/);
expect(binding('myForm.$valid')).toEqual('false');
});
</doc:scenario>
</doc:example>
*/
var inputDirective = ['$browser', '$sniffer', function($browser, $sniffer) {
return {
restrict: 'E',
require: '?ngModel',
link: function(scope, element, attr, ctrl) {
if (ctrl) {
(inputType[lowercase(attr.type)] || inputType.text)(scope, element, attr, ctrl, $sniffer,
$browser);
}
}
};
}];
var VALID_CLASS = 'ng-valid',
INVALID_CLASS = 'ng-invalid',
PRISTINE_CLASS = 'ng-pristine',
DIRTY_CLASS = 'ng-dirty';
/**
* @ngdoc object
* @name ng.directive:ngModel.NgModelController
*
* @property {string} $viewValue Actual string value in the view.
* @property {*} $modelValue The value in the model, that the control is bound to.
* @property {Array.<Function>} $parsers Array of functions to execute, as a pipeline, whenever
the control reads value from the DOM. Each function is called, in turn, passing the value
through to the next. Used to sanitize / convert the value as well as validation.
For validation, the parsers should update the validity state using
{@link ng.directive:ngModel.NgModelController#$setValidity $setValidity()},
and return `undefined` for invalid values.
*
* @property {Array.<Function>} $formatters Array of functions to execute, as a pipeline, whenever
the model value changes. Each function is called, in turn, passing the value through to the
next. Used to format / convert values for display in the control and validation.
* <pre>
* function formatter(value) {
* if (value) {
* return value.toUpperCase();
* }
* }
* ngModel.$formatters.push(formatter);
* </pre>
* @property {Object} $error An object hash with all errors as keys.
*
* @property {boolean} $pristine True if user has not interacted with the control yet.
* @property {boolean} $dirty True if user has already interacted with the control.
* @property {boolean} $valid True if there is no error.
* @property {boolean} $invalid True if at least one error on the control.
*
* @description
*
* `NgModelController` provides API for the `ng-model` directive. The controller contains
* services for data-binding, validation, CSS update, value formatting and parsing. It
* specifically does not contain any logic which deals with DOM rendering or listening to
* DOM events. The `NgModelController` is meant to be extended by other directives where, the
* directive provides DOM manipulation and the `NgModelController` provides the data-binding.
* Note that you cannot use `NgModelController` in a directive with an isolated scope,
* as, in that case, the `ng-model` value gets put into the isolated scope and does not get
* propogated to the parent scope.
*
*
* This example shows how to use `NgModelController` with a custom control to achieve
* data-binding. Notice how different directives (`contenteditable`, `ng-model`, and `required`)
* collaborate together to achieve the desired result.
*
* <example module="customControl">
<file name="style.css">
[contenteditable] {
border: 1px solid black;
background-color: white;
min-height: 20px;
}
.ng-invalid {
border: 1px solid red;
}
</file>
<file name="script.js">
angular.module('customControl', []).
directive('contenteditable', function() {
return {
restrict: 'A', // only activate on element attribute
require: '?ngModel', // get a hold of NgModelController
link: function(scope, element, attrs, ngModel) {
if(!ngModel) return; // do nothing if no ng-model
// Specify how UI should be updated
ngModel.$render = function() {
element.html(ngModel.$viewValue || '');
};
// Listen for change events to enable binding
element.on('blur keyup change', function() {
scope.$apply(read);
});
read(); // initialize
// Write data to the model
function read() {
var html = element.html();
// When we clear the content editable the browser leaves a <br> behind
// If strip-br attribute is provided then we strip this out
if( attrs.stripBr && html == '<br>' ) {
html = '';
}
ngModel.$setViewValue(html);
}
}
};
});
</file>
<file name="index.html">
<form name="myForm">
<div contenteditable
name="myWidget" ng-model="userContent"
strip-br="true"
required>Change me!</div>
<span ng-show="myForm.myWidget.$error.required">Required!</span>
<hr>
<textarea ng-model="userContent"></textarea>
</form>
</file>
<file name="scenario.js">
it('should data-bind and become invalid', function() {
var contentEditable = element('[contenteditable]');
expect(contentEditable.text()).toEqual('Change me!');
input('userContent').enter('');
expect(contentEditable.text()).toEqual('');
expect(contentEditable.prop('className')).toMatch(/ng-invalid-required/);
});
</file>
* </example>
*
*/
var NgModelController = ['$scope', '$exceptionHandler', '$attrs', '$element', '$parse',
function($scope, $exceptionHandler, $attr, $element, $parse) {
this.$viewValue = Number.NaN;
this.$modelValue = Number.NaN;
this.$parsers = [];
this.$formatters = [];
this.$viewChangeListeners = [];
this.$pristine = true;
this.$dirty = false;
this.$valid = true;
this.$invalid = false;
this.$name = $attr.name;
var ngModelGet = $parse($attr.ngModel),
ngModelSet = ngModelGet.assign;
if (!ngModelSet) {
throw minErr('ngModel')('nonassign', "Expression '{0}' is non-assignable. Element: {1}",
$attr.ngModel, startingTag($element));
}
/**
* @ngdoc function
* @name ng.directive:ngModel.NgModelController#$render
* @methodOf ng.directive:ngModel.NgModelController
*
* @description
* Called when the view needs to be updated. It is expected that the user of the ng-model
* directive will implement this method.
*/
this.$render = noop;
var parentForm = $element.inheritedData('$formController') || nullFormCtrl,
invalidCount = 0, // used to easily determine if we are valid
$error = this.$error = {}; // keep invalid keys here
// Setup initial state of the control
$element.addClass(PRISTINE_CLASS);
toggleValidCss(true);
// convenience method for easy toggling of classes
function toggleValidCss(isValid, validationErrorKey) {
validationErrorKey = validationErrorKey ? '-' + snake_case(validationErrorKey, '-') : '';
$element.
removeClass((isValid ? INVALID_CLASS : VALID_CLASS) + validationErrorKey).
addClass((isValid ? VALID_CLASS : INVALID_CLASS) + validationErrorKey);
}
/**
* @ngdoc function
* @name ng.directive:ngModel.NgModelController#$setValidity
* @methodOf ng.directive:ngModel.NgModelController
*
* @description
* Change the validity state, and notifies the form when the control changes validity. (i.e. it
* does not notify form if given validator is already marked as invalid).
*
* This method should be called by validators - i.e. the parser or formatter functions.
*
* @param {string} validationErrorKey Name of the validator. the `validationErrorKey` will assign
* to `$error[validationErrorKey]=isValid` so that it is available for data-binding.
* The `validationErrorKey` should be in camelCase and will get converted into dash-case
* for class name. Example: `myError` will result in `ng-valid-my-error` and `ng-invalid-my-error`
* class and can be bound to as `{{someForm.someControl.$error.myError}}` .
* @param {boolean} isValid Whether the current state is valid (true) or invalid (false).
*/
this.$setValidity = function(validationErrorKey, isValid) {
if ($error[validationErrorKey] === !isValid) return;
if (isValid) {
if ($error[validationErrorKey]) invalidCount--;
if (!invalidCount) {
toggleValidCss(true);
this.$valid = true;
this.$invalid = false;
}
} else {
toggleValidCss(false);
this.$invalid = true;
this.$valid = false;
invalidCount++;
}
$error[validationErrorKey] = !isValid;
toggleValidCss(isValid, validationErrorKey);
parentForm.$setValidity(validationErrorKey, isValid, this);
};
/**
* @ngdoc function
* @name ng.directive:ngModel.NgModelController#$setPristine
* @methodOf ng.directive:ngModel.NgModelController
*
* @description
* Sets the control to its pristine state.
*
* This method can be called to remove the 'ng-dirty' class and set the control to its pristine
* state (ng-pristine class).
*/
this.$setPristine = function () {
this.$dirty = false;
this.$pristine = true;
$element.removeClass(DIRTY_CLASS).addClass(PRISTINE_CLASS);
};
/**
* @ngdoc function
* @name ng.directive:ngModel.NgModelController#$setViewValue
* @methodOf ng.directive:ngModel.NgModelController
*
* @description
* Read a value from view.
*
* This method should be called from within a DOM event handler.
* For example {@link ng.directive:input input} or
* {@link ng.directive:select select} directives call it.
*
* It internally calls all `$parsers` (including validators) and updates the `$modelValue` and the actual model path.
* Lastly it calls all registered change listeners.
*
* @param {string} value Value from the view.
*/
this.$setViewValue = function(value) {
this.$viewValue = value;
// change to dirty
if (this.$pristine) {
this.$dirty = true;
this.$pristine = false;
$element.removeClass(PRISTINE_CLASS).addClass(DIRTY_CLASS);
parentForm.$setDirty();
}
forEach(this.$parsers, function(fn) {
value = fn(value);
});
if (this.$modelValue !== value) {
this.$modelValue = value;
ngModelSet($scope, value);
forEach(this.$viewChangeListeners, function(listener) {
try {
listener();
} catch(e) {
$exceptionHandler(e);
}
})
}
};
// model -> value
var ctrl = this;
$scope.$watch(function ngModelWatch() {
var value = ngModelGet($scope);
// if scope model value and ngModel value are out of sync
if (ctrl.$modelValue !== value) {
var formatters = ctrl.$formatters,
idx = formatters.length;
ctrl.$modelValue = value;
while(idx--) {
value = formatters[idx](value);
}
if (ctrl.$viewValue !== value) {
ctrl.$viewValue = value;
ctrl.$render();
}
}
});
}];
/**
* @ngdoc directive
* @name ng.directive:ngModel
*
* @element input
*
* @description
* Is a directive that tells Angular to do two-way data binding. It works together with `input`,
* `select`, `textarea` and even custom form controls that use {@link ng.directive:ngModel.NgModelController
* NgModelController} exposed by this directive.
*
* `ngModel` is responsible for:
*
* - binding the view into the model, which other directives such as `input`, `textarea` or `select`
* require,
* - providing validation behavior (i.e. required, number, email, url),
* - keeping state of the control (valid/invalid, dirty/pristine, validation errors),
* - setting related css class onto the element (`ng-valid`, `ng-invalid`, `ng-dirty`, `ng-pristine`),
* - register the control with parent {@link ng.directive:form form}.
*
* Note: `ngModel` will try to bind to the property given by evaluating the expression on the
* current scope. If the property doesn't already exist on this scope, it will be created
* implicitly and added to the scope.
*
* For basic examples, how to use `ngModel`, see:
*
* - {@link ng.directive:input input}
* - {@link ng.directive:input.text text}
* - {@link ng.directive:input.checkbox checkbox}
* - {@link ng.directive:input.radio radio}
* - {@link ng.directive:input.number number}
* - {@link ng.directive:input.email email}
* - {@link ng.directive:input.url url}
* - {@link ng.directive:select select}
* - {@link ng.directive:textarea textarea}
*
*/
var ngModelDirective = function() {
return {
require: ['ngModel', '^?form'],
controller: NgModelController,
link: function(scope, element, attr, ctrls) {
// notify others, especially parent forms
var modelCtrl = ctrls[0],
formCtrl = ctrls[1] || nullFormCtrl;
formCtrl.$addControl(modelCtrl);
element.on('$destroy', function() {
formCtrl.$removeControl(modelCtrl);
});
}
};
};
/**
* @ngdoc directive
* @name ng.directive:ngChange
* @restrict E
*
* @description
* Evaluate given expression when user changes the input.
* The expression is not evaluated when the value change is coming from the model.
*
* Note, this directive requires `ngModel` to be present.
*
* @element input
*
* @example
* <doc:example>
* <doc:source>
* <script>
* function Controller($scope) {
* $scope.counter = 0;
* $scope.change = function() {
* $scope.counter++;
* };
* }
* </script>
* <div ng-controller="Controller">
* <input type="checkbox" ng-model="confirmed" ng-change="change()" id="ng-change-example1" />
* <input type="checkbox" ng-model="confirmed" id="ng-change-example2" />
* <label for="ng-change-example2">Confirmed</label><br />
* debug = {{confirmed}}<br />
* counter = {{counter}}
* </div>
* </doc:source>
* <doc:scenario>
* it('should evaluate the expression if changing from view', function() {
* expect(binding('counter')).toEqual('0');
* element('#ng-change-example1').click();
* expect(binding('counter')).toEqual('1');
* expect(binding('confirmed')).toEqual('true');
* });
*
* it('should not evaluate the expression if changing from model', function() {
* element('#ng-change-example2').click();
* expect(binding('counter')).toEqual('0');
* expect(binding('confirmed')).toEqual('true');
* });
* </doc:scenario>
* </doc:example>
*/
var ngChangeDirective = valueFn({
require: 'ngModel',
link: function(scope, element, attr, ctrl) {
ctrl.$viewChangeListeners.push(function() {
scope.$eval(attr.ngChange);
});
}
});
var requiredDirective = function() {
return {
require: '?ngModel',
link: function(scope, elm, attr, ctrl) {
if (!ctrl) return;
attr.required = true; // force truthy in case we are on non input element
var validator = function(value) {
if (attr.required && (isEmpty(value) || value === false)) {
ctrl.$setValidity('required', false);
return;
} else {
ctrl.$setValidity('required', true);
return value;
}
};
ctrl.$formatters.push(validator);
ctrl.$parsers.unshift(validator);
attr.$observe('required', function() {
validator(ctrl.$viewValue);
});
}
};
};
/**
* @ngdoc directive
* @name ng.directive:ngList
*
* @description
* Text input that converts between comma-separated string into an array of strings.
*
* @element input
* @param {string=} ngList optional delimiter that should be used to split the value. If
* specified in form `/something/` then the value will be converted into a regular expression.
*
* @example
<doc:example>
<doc:source>
<script>
function Ctrl($scope) {
$scope.names = ['igor', 'misko', 'vojta'];
}
</script>
<form name="myForm" ng-controller="Ctrl">
List: <input name="namesInput" ng-model="names" ng-list required>
<span class="error" ng-show="myForm.namesInput.$error.required">
Required!</span>
<br>
<tt>names = {{names}}</tt><br/>
<tt>myForm.namesInput.$valid = {{myForm.namesInput.$valid}}</tt><br/>
<tt>myForm.namesInput.$error = {{myForm.namesInput.$error}}</tt><br/>
<tt>myForm.$valid = {{myForm.$valid}}</tt><br/>
<tt>myForm.$error.required = {{!!myForm.$error.required}}</tt><br/>
</form>
</doc:source>
<doc:scenario>
it('should initialize to model', function() {
expect(binding('names')).toEqual('["igor","misko","vojta"]');
expect(binding('myForm.namesInput.$valid')).toEqual('true');
expect(element('span.error').css('display')).toBe('none');
});
it('should be invalid if empty', function() {
input('names').enter('');
expect(binding('names')).toEqual('[]');
expect(binding('myForm.namesInput.$valid')).toEqual('false');
expect(element('span.error').css('display')).not().toBe('none');
});
</doc:scenario>
</doc:example>
*/
var ngListDirective = function() {
return {
require: 'ngModel',
link: function(scope, element, attr, ctrl) {
var match = /\/(.*)\//.exec(attr.ngList),
separator = match && new RegExp(match[1]) || attr.ngList || ',';
var parse = function(viewValue) {
var list = [];
if (viewValue) {
forEach(viewValue.split(separator), function(value) {
if (value) list.push(trim(value));
});
}
return list;
};
ctrl.$parsers.push(parse);
ctrl.$formatters.push(function(value) {
if (isArray(value)) {
return value.join(', ');
}
return undefined;
});
}
};
};
var CONSTANT_VALUE_REGEXP = /^(true|false|\d+)$/;
var ngValueDirective = function() {
return {
priority: 100,
compile: function(tpl, tplAttr) {
if (CONSTANT_VALUE_REGEXP.test(tplAttr.ngValue)) {
return function(scope, elm, attr) {
attr.$set('value', scope.$eval(attr.ngValue));
};
} else {
return function(scope, elm, attr) {
scope.$watch(attr.ngValue, function valueWatchAction(value) {
attr.$set('value', value);
});
};
}
}
};
};
/**
* @ngdoc directive
* @name ng.directive:ngBind
*
* @description
* The `ngBind` attribute tells Angular to replace the text content of the specified HTML element
* with the value of a given expression, and to update the text content when the value of that
* expression changes.
*
* Typically, you don't use `ngBind` directly, but instead you use the double curly markup like
* `{{ expression }}` which is similar but less verbose.
*
* It is preferrable to use `ngBind` instead of `{{ expression }}` when a template is momentarily
* displayed by the browser in its raw state before Angular compiles it. Since `ngBind` is an
* element attribute, it makes the bindings invisible to the user while the page is loading.
*
* An alternative solution to this problem would be using the
* {@link ng.directive:ngCloak ngCloak} directive.
*
*
* @element ANY
* @param {expression} ngBind {@link guide/expression Expression} to evaluate.
*
* @example
* Enter a name in the Live Preview text box; the greeting below the text box changes instantly.
<doc:example>
<doc:source>
<script>
function Ctrl($scope) {
$scope.name = 'Whirled';
}
</script>
<div ng-controller="Ctrl">
Enter name: <input type="text" ng-model="name"><br>
Hello <span ng-bind="name"></span>!
</div>
</doc:source>
<doc:scenario>
it('should check ng-bind', function() {
expect(using('.doc-example-live').binding('name')).toBe('Whirled');
using('.doc-example-live').input('name').enter('world');
expect(using('.doc-example-live').binding('name')).toBe('world');
});
</doc:scenario>
</doc:example>
*/
var ngBindDirective = ngDirective(function(scope, element, attr) {
element.addClass('ng-binding').data('$binding', attr.ngBind);
scope.$watch(attr.ngBind, function ngBindWatchAction(value) {
element.text(value == undefined ? '' : value);
});
});
/**
* @ngdoc directive
* @name ng.directive:ngBindTemplate
*
* @description
* The `ngBindTemplate` directive specifies that the element
* text content should be replaced with the interpolation of the template
* in the `ngBindTemplate` attribute.
* Unlike `ngBind`, the `ngBindTemplate` can contain multiple `{{` `}}`
* expressions. This directive is needed since some HTML elements
* (such as TITLE and OPTION) cannot contain SPAN elements.
*
* @element ANY
* @param {string} ngBindTemplate template of form
* <tt>{{</tt> <tt>expression</tt> <tt>}}</tt> to eval.
*
* @example
* Try it here: enter text in text box and watch the greeting change.
<doc:example>
<doc:source>
<script>
function Ctrl($scope) {
$scope.salutation = 'Hello';
$scope.name = 'World';
}
</script>
<div ng-controller="Ctrl">
Salutation: <input type="text" ng-model="salutation"><br>
Name: <input type="text" ng-model="name"><br>
<pre ng-bind-template="{{salutation}} {{name}}!"></pre>
</div>
</doc:source>
<doc:scenario>
it('should check ng-bind', function() {
expect(using('.doc-example-live').binding('salutation')).
toBe('Hello');
expect(using('.doc-example-live').binding('name')).
toBe('World');
using('.doc-example-live').input('salutation').enter('Greetings');
using('.doc-example-live').input('name').enter('user');
expect(using('.doc-example-live').binding('salutation')).
toBe('Greetings');
expect(using('.doc-example-live').binding('name')).
toBe('user');
});
</doc:scenario>
</doc:example>
*/
var ngBindTemplateDirective = ['$interpolate', function($interpolate) {
return function(scope, element, attr) {
// TODO: move this to scenario runner
var interpolateFn = $interpolate(element.attr(attr.$attr.ngBindTemplate));
element.addClass('ng-binding').data('$binding', interpolateFn);
attr.$observe('ngBindTemplate', function(value) {
element.text(value);
});
}
}];
/**
* @ngdoc directive
* @name ng.directive:ngBindHtml
*
* @description
* Creates a binding that will innerHTML the result of evaluating the `expression` into the current
* element in a secure way. By default, the innerHTML-ed content will be sanitized using the {@link
* ngSanitize.$sanitize $sanitize} service. To utilize this functionality, ensure that `$sanitize`
* is available, for example, by including {@link ngSanitize} in your module's dependencies (not in
* core Angular.) You may also bypass sanitization for values you know are safe. To do so, bind to
* an explicitly trusted value via {@link ng.$sce#trustAsHtml $sce.trustAsHtml}. See the example
* under {@link ng.$sce#Example Strict Contextual Escaping (SCE)}.
*
* Note: If a `$sanitize` service is unavailable and the bound value isn't explicitly trusted, you
* will have an exception (instead of an exploit.)
*
* @element ANY
* @param {expression} ngBindHtml {@link guide/expression Expression} to evaluate.
*/
var ngBindHtmlDirective = ['$sce', function($sce) {
return function(scope, element, attr) {
element.addClass('ng-binding').data('$binding', attr.ngBindHtml);
scope.$watch($sce.parseAsHtml(attr.ngBindHtml), function ngBindHtmlWatchAction(value) {
element.html(value || '');
});
};
}];
function classDirective(name, selector) {
name = 'ngClass' + name;
return function() {
return {
restrict: 'AC',
link: function(scope, element, attr) {
var oldVal = undefined;
scope.$watch(attr[name], ngClassWatchAction, true);
attr.$observe('class', function(value) {
ngClassWatchAction(scope.$eval(attr[name]));
});
if (name !== 'ngClass') {
scope.$watch('$index', function($index, old$index) {
var mod = $index & 1;
if (mod !== old$index & 1) {
if (mod === selector) {
addClass(scope.$eval(attr[name]));
} else {
removeClass(scope.$eval(attr[name]));
}
}
});
}
function ngClassWatchAction(newVal) {
if (selector === true || scope.$index % 2 === selector) {
if (oldVal && !equals(newVal,oldVal)) {
removeClass(oldVal);
}
addClass(newVal);
}
oldVal = copy(newVal);
}
function removeClass(classVal) {
attr.$removeClass(flattenClasses(classVal));
}
function addClass(classVal) {
attr.$addClass(flattenClasses(classVal));
}
function flattenClasses(classVal) {
if(isArray(classVal)) {
return classVal.join(' ');
} else if (isObject(classVal)) {
var classes = [], i = 0;
forEach(classVal, function(v, k) {
if (v) {
classes.push(k);
}
});
return classes.join(' ');
}
return classVal;
};
}
};
};
}
/**
* @ngdoc directive
* @name ng.directive:ngClass
*
* @description
* The `ngClass` allows you to set CSS classes on HTML an element, dynamically, by databinding
* an expression that represents all classes to be added.
*
* The directive won't add duplicate classes if a particular class was already set.
*
* When the expression changes, the previously added classes are removed and only then the
* new classes are added.
*
* @animations
* add - happens just before the class is applied to the element
* remove - happens just before the class is removed from the element
*
* @element ANY
* @param {expression} ngClass {@link guide/expression Expression} to eval. The result
* of the evaluation can be a string representing space delimited class
* names, an array, or a map of class names to boolean values. In the case of a map, the
* names of the properties whose values are truthy will be added as css classes to the
* element.
*
* @example Example that demostrates basic bindings via ngClass directive.
<example>
<file name="index.html">
<p ng-class="{strike: strike, bold: bold, red: red}">Map Syntax Example</p>
<input type="checkbox" ng-model="bold"> bold
<input type="checkbox" ng-model="strike"> strike
<input type="checkbox" ng-model="red"> red
<hr>
<p ng-class="style">Using String Syntax</p>
<input type="text" ng-model="style" placeholder="Type: bold strike red">
<hr>
<p ng-class="[style1, style2, style3]">Using Array Syntax</p>
<input ng-model="style1" placeholder="Type: bold"><br>
<input ng-model="style2" placeholder="Type: strike"><br>
<input ng-model="style3" placeholder="Type: red"><br>
</file>
<file name="style.css">
.strike {
text-decoration: line-through;
}
.bold {
font-weight: bold;
}
.red {
color: red;
}
</file>
<file name="scenario.js">
it('should let you toggle the class', function() {
expect(element('.doc-example-live p:first').prop('className')).not().toMatch(/bold/);
expect(element('.doc-example-live p:first').prop('className')).not().toMatch(/red/);
input('bold').check();
expect(element('.doc-example-live p:first').prop('className')).toMatch(/bold/);
input('red').check();
expect(element('.doc-example-live p:first').prop('className')).toMatch(/red/);
});
it('should let you toggle string example', function() {
expect(element('.doc-example-live p:nth-of-type(2)').prop('className')).toBe('');
input('style').enter('red');
expect(element('.doc-example-live p:nth-of-type(2)').prop('className')).toBe('red');
});
it('array example should have 3 classes', function() {
expect(element('.doc-example-live p:last').prop('className')).toBe('');
input('style1').enter('bold');
input('style2').enter('strike');
input('style3').enter('red');
expect(element('.doc-example-live p:last').prop('className')).toBe('bold strike red');
});
</file>
</example>
## Animations
Example that demostrates how addition and removal of classes can be animated.
<example animations="true">
<file name="index.html">
<input type="button" value="set" ng-click="myVar='my-class'">
<input type="button" value="clear" ng-click="myVar=''">
<br>
<span ng-class="myVar">Sample Text</span>
</file>
<file name="style.css">
.my-class-add, .my-class-remove {
-webkit-transition:all cubic-bezier(0.250, 0.460, 0.450, 0.940) 0.5s;
-moz-transition:all cubic-bezier(0.250, 0.460, 0.450, 0.940) 0.5s;
-o-transition:all cubic-bezier(0.250, 0.460, 0.450, 0.940) 0.5s;
transition:all cubic-bezier(0.250, 0.460, 0.450, 0.940) 0.5s;
}
.my-class,
.my-class-add.my-class-add-active {
color: red;
font-size:3em;
}
.my-class-remove.my-class-remove-active {
font-size:1.0em;
color:black;
}
</file>
<file name="scenario.js">
it('should check ng-class', function() {
expect(element('.doc-example-live span').prop('className')).not().
toMatch(/my-class/);
using('.doc-example-live').element(':button:first').click();
expect(element('.doc-example-live span').prop('className')).
toMatch(/my-class/);
using('.doc-example-live').element(':button:last').click();
expect(element('.doc-example-live span').prop('className')).not().
toMatch(/my-class/);
});
</file>
</example>
*/
var ngClassDirective = classDirective('', true);
/**
* @ngdoc directive
* @name ng.directive:ngClassOdd
*
* @description
* The `ngClassOdd` and `ngClassEven` directives work exactly as
* {@link ng.directive:ngClass ngClass}, except it works in
* conjunction with `ngRepeat` and takes affect only on odd (even) rows.
*
* This directive can be applied only within a scope of an
* {@link ng.directive:ngRepeat ngRepeat}.
*
* @element ANY
* @param {expression} ngClassOdd {@link guide/expression Expression} to eval. The result
* of the evaluation can be a string representing space delimited class names or an array.
*
* @example
<example>
<file name="index.html">
<ol ng-init="names=['John', 'Mary', 'Cate', 'Suz']">
<li ng-repeat="name in names">
<span ng-class-odd="'odd'" ng-class-even="'even'">
{{name}}
</span>
</li>
</ol>
</file>
<file name="style.css">
.odd {
color: red;
}
.even {
color: blue;
}
</file>
<file name="scenario.js">
it('should check ng-class-odd and ng-class-even', function() {
expect(element('.doc-example-live li:first span').prop('className')).
toMatch(/odd/);
expect(element('.doc-example-live li:last span').prop('className')).
toMatch(/even/);
});
</file>
</example>
*/
var ngClassOddDirective = classDirective('Odd', 0);
/**
* @ngdoc directive
* @name ng.directive:ngClassEven
*
* @description
* The `ngClassOdd` and `ngClassEven` directives work exactly as
* {@link ng.directive:ngClass ngClass}, except it works in
* conjunction with `ngRepeat` and takes affect only on odd (even) rows.
*
* This directive can be applied only within a scope of an
* {@link ng.directive:ngRepeat ngRepeat}.
*
* @element ANY
* @param {expression} ngClassEven {@link guide/expression Expression} to eval. The
* result of the evaluation can be a string representing space delimited class names or an array.
*
* @example
<example>
<file name="index.html">
<ol ng-init="names=['John', 'Mary', 'Cate', 'Suz']">
<li ng-repeat="name in names">
<span ng-class-odd="'odd'" ng-class-even="'even'">
{{name}}
</span>
</li>
</ol>
</file>
<file name="style.css">
.odd {
color: red;
}
.even {
color: blue;
}
</file>
<file name="scenario.js">
it('should check ng-class-odd and ng-class-even', function() {
expect(element('.doc-example-live li:first span').prop('className')).
toMatch(/odd/);
expect(element('.doc-example-live li:last span').prop('className')).
toMatch(/even/);
});
</file>
</example>
*/
var ngClassEvenDirective = classDirective('Even', 1);
/**
* @ngdoc directive
* @name ng.directive:ngCloak
*
* @description
* The `ngCloak` directive is used to prevent the Angular html template from being briefly
* displayed by the browser in its raw (uncompiled) form while your application is loading. Use this
* directive to avoid the undesirable flicker effect caused by the html template display.
*
* The directive can be applied to the `<body>` element, but typically a fine-grained application is
* preferred in order to benefit from progressive rendering of the browser view.
*
* `ngCloak` works in cooperation with a css rule that is embedded within `angular.js` and
* `angular.min.js` files. Following is the css rule:
*
* <pre>
* [ng\:cloak], [ng-cloak], [data-ng-cloak], [x-ng-cloak], .ng-cloak, .x-ng-cloak {
* display: none !important;
* }
* </pre>
*
* When this css rule is loaded by the browser, all html elements (including their children) that
* are tagged with the `ng-cloak` directive are hidden. When Angular comes across this directive
* during the compilation of the template it deletes the `ngCloak` element attribute, which
* makes the compiled element visible.
*
* For the best result, `angular.js` script must be loaded in the head section of the html file;
* alternatively, the css rule (above) must be included in the external stylesheet of the
* application.
*
* Legacy browsers, like IE7, do not provide attribute selector support (added in CSS 2.1) so they
* cannot match the `[ng\:cloak]` selector. To work around this limitation, you must add the css
* class `ngCloak` in addition to `ngCloak` directive as shown in the example below.
*
* @element ANY
*
* @example
<doc:example>
<doc:source>
<div id="template1" ng-cloak>{{ 'hello' }}</div>
<div id="template2" ng-cloak class="ng-cloak">{{ 'hello IE7' }}</div>
</doc:source>
<doc:scenario>
it('should remove the template directive and css class', function() {
expect(element('.doc-example-live #template1').attr('ng-cloak')).
not().toBeDefined();
expect(element('.doc-example-live #template2').attr('ng-cloak')).
not().toBeDefined();
});
</doc:scenario>
</doc:example>
*
*/
var ngCloakDirective = ngDirective({
compile: function(element, attr) {
attr.$set('ngCloak', undefined);
element.removeClass('ng-cloak');
}
});
/**
* @ngdoc directive
* @name ng.directive:ngController
*
* @description
* The `ngController` directive assigns behavior to a scope. This is a key aspect of how angular
* supports the principles behind the Model-View-Controller design pattern.
*
* MVC components in angular:
*
* * Model — The Model is data in scope properties; scopes are attached to the DOM.
* * View — The template (HTML with data bindings) is rendered into the View.
* * Controller — The `ngController` directive specifies a Controller class; the class has
* methods that typically express the business logic behind the application.
*
* Note that an alternative way to define controllers is via the {@link ngRoute.$route $route} service.
*
* @element ANY
* @scope
* @param {expression} ngController Name of a globally accessible constructor function or an
* {@link guide/expression expression} that on the current scope evaluates to a
* constructor function. The controller instance can further be published into the scope
* by adding `as localName` the controller name attribute.
*
* @example
* Here is a simple form for editing user contact information. Adding, removing, clearing, and
* greeting are methods declared on the controller (see source tab). These methods can
* easily be called from the angular markup. Notice that the scope becomes the `this` for the
* controller's instance. This allows for easy access to the view data from the controller. Also
* notice that any changes to the data are automatically reflected in the View without the need
* for a manual update. The example is included in two different declaration styles based on
* your style preferences.
<doc:example>
<doc:source>
<script>
function SettingsController1() {
this.name = "John Smith";
this.contacts = [
{type: 'phone', value: '408 555 1212'},
{type: 'email', value: 'john.smith@example.org'} ];
};
SettingsController1.prototype.greet = function() {
alert(this.name);
};
SettingsController1.prototype.addContact = function() {
this.contacts.push({type: 'email', value: 'yourname@example.org'});
};
SettingsController1.prototype.removeContact = function(contactToRemove) {
var index = this.contacts.indexOf(contactToRemove);
this.contacts.splice(index, 1);
};
SettingsController1.prototype.clearContact = function(contact) {
contact.type = 'phone';
contact.value = '';
};
</script>
<div id="ctrl-as-exmpl" ng-controller="SettingsController1 as settings">
Name: <input type="text" ng-model="settings.name"/>
[ <a href="" ng-click="settings.greet()">greet</a> ]<br/>
Contact:
<ul>
<li ng-repeat="contact in settings.contacts">
<select ng-model="contact.type">
<option>phone</option>
<option>email</option>
</select>
<input type="text" ng-model="contact.value"/>
[ <a href="" ng-click="settings.clearContact(contact)">clear</a>
| <a href="" ng-click="settings.removeContact(contact)">X</a> ]
</li>
<li>[ <a href="" ng-click="settings.addContact()">add</a> ]</li>
</ul>
</div>
</doc:source>
<doc:scenario>
it('should check controller as', function() {
expect(element('#ctrl-as-exmpl>:input').val()).toBe('John Smith');
expect(element('#ctrl-as-exmpl li:nth-child(1) input').val())
.toBe('408 555 1212');
expect(element('#ctrl-as-exmpl li:nth-child(2) input').val())
.toBe('john.smith@example.org');
element('#ctrl-as-exmpl li:first a:contains("clear")').click();
expect(element('#ctrl-as-exmpl li:first input').val()).toBe('');
element('#ctrl-as-exmpl li:last a:contains("add")').click();
expect(element('#ctrl-as-exmpl li:nth-child(3) input').val())
.toBe('yourname@example.org');
});
</doc:scenario>
</doc:example>
<doc:example>
<doc:source>
<script>
function SettingsController2($scope) {
$scope.name = "John Smith";
$scope.contacts = [
{type:'phone', value:'408 555 1212'},
{type:'email', value:'john.smith@example.org'} ];
$scope.greet = function() {
alert(this.name);
};
$scope.addContact = function() {
this.contacts.push({type:'email', value:'yourname@example.org'});
};
$scope.removeContact = function(contactToRemove) {
var index = this.contacts.indexOf(contactToRemove);
this.contacts.splice(index, 1);
};
$scope.clearContact = function(contact) {
contact.type = 'phone';
contact.value = '';
};
}
</script>
<div id="ctrl-exmpl" ng-controller="SettingsController2">
Name: <input type="text" ng-model="name"/>
[ <a href="" ng-click="greet()">greet</a> ]<br/>
Contact:
<ul>
<li ng-repeat="contact in contacts">
<select ng-model="contact.type">
<option>phone</option>
<option>email</option>
</select>
<input type="text" ng-model="contact.value"/>
[ <a href="" ng-click="clearContact(contact)">clear</a>
| <a href="" ng-click="removeContact(contact)">X</a> ]
</li>
<li>[ <a href="" ng-click="addContact()">add</a> ]</li>
</ul>
</div>
</doc:source>
<doc:scenario>
it('should check controller', function() {
expect(element('#ctrl-exmpl>:input').val()).toBe('John Smith');
expect(element('#ctrl-exmpl li:nth-child(1) input').val())
.toBe('408 555 1212');
expect(element('#ctrl-exmpl li:nth-child(2) input').val())
.toBe('john.smith@example.org');
element('#ctrl-exmpl li:first a:contains("clear")').click();
expect(element('#ctrl-exmpl li:first input').val()).toBe('');
element('#ctrl-exmpl li:last a:contains("add")').click();
expect(element('#ctrl-exmpl li:nth-child(3) input').val())
.toBe('yourname@example.org');
});
</doc:scenario>
</doc:example>
*/
var ngControllerDirective = [function() {
return {
scope: true,
controller: '@'
};
}];
/**
* @ngdoc directive
* @name ng.directive:ngCsp
* @priority 1000
*
* @element html
* @description
* Enables [CSP (Content Security Policy)](https://developer.mozilla.org/en/Security/CSP) support.
*
* This is necessary when developing things like Google Chrome Extensions.
*
* CSP forbids apps to use `eval` or `Function(string)` generated functions (among other things).
* For us to be compatible, we just need to implement the "getterFn" in $parse without violating
* any of these restrictions.
*
* AngularJS uses `Function(string)` generated functions as a speed optimization. By applying `ngCsp`
* it is be possible to opt into the CSP compatible mode. When this mode is on AngularJS will
* evaluate all expressions up to 30% slower than in non-CSP mode, but no security violations will
* be raised.
*
* In order to use this feature put `ngCsp` directive on the root element of the application.
*
* @example
* This example shows how to apply the `ngCsp` directive to the `html` tag.
<pre>
<!doctype html>
<html ng-app ng-csp>
...
...
</html>
</pre>
*/
var ngCspDirective = ['$sniffer', function($sniffer) {
return {
priority: 1000,
compile: function() {
$sniffer.csp = true;
}
};
}];
/**
* @ngdoc directive
* @name ng.directive:ngClick
*
* @description
* The ngClick allows you to specify custom behavior when
* element is clicked.
*
* @element ANY
* @param {expression} ngClick {@link guide/expression Expression} to evaluate upon
* click. (Event object is available as `$event`)
*
* @example
<doc:example>
<doc:source>
<button ng-click="count = count + 1" ng-init="count=0">
Increment
</button>
count: {{count}}
</doc:source>
<doc:scenario>
it('should check ng-click', function() {
expect(binding('count')).toBe('0');
element('.doc-example-live :button').click();
expect(binding('count')).toBe('1');
});
</doc:scenario>
</doc:example>
*/
/*
* A directive that allows creation of custom onclick handlers that are defined as angular
* expressions and are compiled and executed within the current scope.
*
* Events that are handled via these handler are always configured not to propagate further.
*/
var ngEventDirectives = {};
forEach(
'click dblclick mousedown mouseup mouseover mouseout mousemove mouseenter mouseleave keydown keyup keypress submit focus blur'.split(' '),
function(name) {
var directiveName = directiveNormalize('ng-' + name);
ngEventDirectives[directiveName] = ['$parse', function($parse) {
return function(scope, element, attr) {
var fn = $parse(attr[directiveName]);
element.on(lowercase(name), function(event) {
scope.$apply(function() {
fn(scope, {$event:event});
});
});
};
}];
}
);
/**
* @ngdoc directive
* @name ng.directive:ngDblclick
*
* @description
* The `ngDblclick` directive allows you to specify custom behavior on dblclick event.
*
* @element ANY
* @param {expression} ngDblclick {@link guide/expression Expression} to evaluate upon
* dblclick. (Event object is available as `$event`)
*
* @example
* See {@link ng.directive:ngClick ngClick}
*/
/**
* @ngdoc directive
* @name ng.directive:ngMousedown
*
* @description
* The ngMousedown directive allows you to specify custom behavior on mousedown event.
*
* @element ANY
* @param {expression} ngMousedown {@link guide/expression Expression} to evaluate upon
* mousedown. (Event object is available as `$event`)
*
* @example
* See {@link ng.directive:ngClick ngClick}
*/
/**
* @ngdoc directive
* @name ng.directive:ngMouseup
*
* @description
* Specify custom behavior on mouseup event.
*
* @element ANY
* @param {expression} ngMouseup {@link guide/expression Expression} to evaluate upon
* mouseup. (Event object is available as `$event`)
*
* @example
* See {@link ng.directive:ngClick ngClick}
*/
/**
* @ngdoc directive
* @name ng.directive:ngMouseover
*
* @description
* Specify custom behavior on mouseover event.
*
* @element ANY
* @param {expression} ngMouseover {@link guide/expression Expression} to evaluate upon
* mouseover. (Event object is available as `$event`)
*
* @example
* See {@link ng.directive:ngClick ngClick}
*/
/**
* @ngdoc directive
* @name ng.directive:ngMouseenter
*
* @description
* Specify custom behavior on mouseenter event.
*
* @element ANY
* @param {expression} ngMouseenter {@link guide/expression Expression} to evaluate upon
* mouseenter. (Event object is available as `$event`)
*
* @example
* See {@link ng.directive:ngClick ngClick}
*/
/**
* @ngdoc directive
* @name ng.directive:ngMouseleave
*
* @description
* Specify custom behavior on mouseleave event.
*
* @element ANY
* @param {expression} ngMouseleave {@link guide/expression Expression} to evaluate upon
* mouseleave. (Event object is available as `$event`)
*
* @example
* See {@link ng.directive:ngClick ngClick}
*/
/**
* @ngdoc directive
* @name ng.directive:ngMousemove
*
* @description
* Specify custom behavior on mousemove event.
*
* @element ANY
* @param {expression} ngMousemove {@link guide/expression Expression} to evaluate upon
* mousemove. (Event object is available as `$event`)
*
* @example
* See {@link ng.directive:ngClick ngClick}
*/
/**
* @ngdoc directive
* @name ng.directive:ngKeydown
*
* @description
* Specify custom behavior on keydown event.
*
* @element ANY
* @param {expression} ngKeydown {@link guide/expression Expression} to evaluate upon
* keydown. (Event object is available as `$event` and can be interrogated for keyCode, altKey, etc.)
*
* @example
* See {@link ng.directive:ngClick ngClick}
*/
/**
* @ngdoc directive
* @name ng.directive:ngKeyup
*
* @description
* Specify custom behavior on keyup event.
*
* @element ANY
* @param {expression} ngKeyup {@link guide/expression Expression} to evaluate upon
* keyup. (Event object is available as `$event` and can be interrogated for keyCode, altKey, etc.)
*
* @example
* See {@link ng.directive:ngClick ngClick}
*/
/**
* @ngdoc directive
* @name ng.directive:ngKeypress
*
* @description
* Specify custom behavior on keypress event.
*
* @element ANY
* @param {expression} ngKeypress {@link guide/expression Expression} to evaluate upon
* keypress. (Event object is available as `$event` and can be interrogated for keyCode, altKey, etc.)
*
* @example
* See {@link ng.directive:ngClick ngClick}
*/
/**
* @ngdoc directive
* @name ng.directive:ngSubmit
*
* @description
* Enables binding angular expressions to onsubmit events.
*
* Additionally it prevents the default action (which for form means sending the request to the
* server and reloading the current page) **but only if the form does not contain an `action`
* attribute**.
*
* @element form
* @param {expression} ngSubmit {@link guide/expression Expression} to eval. (Event object is available as `$event`)
*
* @example
<doc:example>
<doc:source>
<script>
function Ctrl($scope) {
$scope.list = [];
$scope.text = 'hello';
$scope.submit = function() {
if (this.text) {
this.list.push(this.text);
this.text = '';
}
};
}
</script>
<form ng-submit="submit()" ng-controller="Ctrl">
Enter text and hit enter:
<input type="text" ng-model="text" name="text" />
<input type="submit" id="submit" value="Submit" />
<pre>list={{list}}</pre>
</form>
</doc:source>
<doc:scenario>
it('should check ng-submit', function() {
expect(binding('list')).toBe('[]');
element('.doc-example-live #submit').click();
expect(binding('list')).toBe('["hello"]');
expect(input('text').val()).toBe('');
});
it('should ignore empty strings', function() {
expect(binding('list')).toBe('[]');
element('.doc-example-live #submit').click();
element('.doc-example-live #submit').click();
expect(binding('list')).toBe('["hello"]');
});
</doc:scenario>
</doc:example>
*/
/**
* @ngdoc directive
* @name ng.directive:ngFocus
*
* @description
* Specify custom behavior on focus event.
*
* @element window, input, select, textarea, a
* @param {expression} ngFocus {@link guide/expression Expression} to evaluate upon
* focus. (Event object is available as `$event`)
*
* @example
* See {@link ng.directive:ngClick ngClick}
*/
/**
* @ngdoc directive
* @name ng.directive:ngBlur
*
* @description
* Specify custom behavior on blur event.
*
* @element window, input, select, textarea, a
* @param {expression} ngBlur {@link guide/expression Expression} to evaluate upon
* blur. (Event object is available as `$event`)
*
* @example
* See {@link ng.directive:ngClick ngClick}
*/
/**
* @ngdoc directive
* @name ng.directive:ngIf
* @restrict A
*
* @description
* The `ngIf` directive removes and recreates a portion of the DOM tree (HTML)
* conditionally based on **"falsy"** and **"truthy"** values, respectively, evaluated within
* an {expression}. In other words, if the expression assigned to **ngIf evaluates to a false
* value** then **the element is removed from the DOM** and **if true** then **a clone of the
* element is reinserted into the DOM**.
*
* `ngIf` differs from `ngShow` and `ngHide` in that `ngIf` completely removes and recreates the
* element in the DOM rather than changing its visibility via the `display` css property. A common
* case when this difference is significant is when using css selectors that rely on an element's
* position within the DOM (HTML), such as the `:first-child` or `:last-child` pseudo-classes.
*
* Note that **when an element is removed using ngIf its scope is destroyed** and **a new scope
* is created when the element is restored**. The scope created within `ngIf` inherits from
* its parent scope using
* {@link https://github.com/angular/angular.js/wiki/The-Nuances-of-Scope-Prototypal-Inheritance prototypal inheritance}.
* An important implication of this is if `ngModel` is used within `ngIf` to bind to
* a javascript primitive defined in the parent scope. In this case any modifications made to the
* variable within the child scope will override (hide) the value in the parent scope.
*
* Also, `ngIf` recreates elements using their compiled state. An example scenario of this behavior
* is if an element's class attribute is directly modified after it's compiled, using something like
* jQuery's `.addClass()` method, and the element is later removed. When `ngIf` recreates the element
* the added class will be lost because the original compiled state is used to regenerate the element.
*
* Additionally, you can provide animations via the ngAnimate module to animate the **enter**
* and **leave** effects.
*
* @animations
* enter - happens just after the ngIf contents change and a new DOM element is created and injected into the ngIf container
* leave - happens just before the ngIf contents are removed from the DOM
*
* @element ANY
* @scope
* @param {expression} ngIf If the {@link guide/expression expression} is falsy then
* the element is removed from the DOM tree (HTML).
*
* @example
<example animations="true">
<file name="index.html">
Click me: <input type="checkbox" ng-model="checked" ng-init="checked=true" /><br/>
Show when checked:
<span ng-if="checked" class="animate-if">
I'm removed when the checkbox is unchecked.
</span>
</file>
<file name="animations.css">
.animate-if {
background:white;
border:1px solid black;
padding:10px;
}
.animate-if.ng-enter, .animate-if.ng-leave {
-webkit-transition:all cubic-bezier(0.250, 0.460, 0.450, 0.940) 0.5s;
-moz-transition:all cubic-bezier(0.250, 0.460, 0.450, 0.940) 0.5s;
-o-transition:all cubic-bezier(0.250, 0.460, 0.450, 0.940) 0.5s;
transition:all cubic-bezier(0.250, 0.460, 0.450, 0.940) 0.5s;
}
.animate-if.ng-enter,
.animate-if.ng-leave.ng-leave-active {
opacity:0;
}
.animate-if.ng-enter.ng-enter-active,
.animate-if.ng-leave {
opacity:1;
}
</file>
</example>
*/
var ngIfDirective = ['$animate', function($animate) {
return {
transclude: 'element',
priority: 1000,
terminal: true,
restrict: 'A',
compile: function (element, attr, transclude) {
return function ($scope, $element, $attr) {
var childElement, childScope;
$scope.$watch($attr.ngIf, function ngIfWatchAction(value) {
if (childElement) {
$animate.leave(childElement);
childElement = undefined;
}
if (childScope) {
childScope.$destroy();
childScope = undefined;
}
if (toBoolean(value)) {
childScope = $scope.$new();
transclude(childScope, function (clone) {
childElement = clone;
$animate.enter(clone, $element.parent(), $element);
});
}
});
}
}
}
}];
/**
* @ngdoc directive
* @name ng.directive:ngInclude
* @restrict ECA
*
* @description
* Fetches, compiles and includes an external HTML fragment.
*
* Keep in mind that:
*
* - by default, the template URL is restricted to the same domain and protocol as the
* application document. This is done by calling {@link ng.$sce#getTrustedResourceUrl
* $sce.getTrustedResourceUrl} on it. To load templates from other domains and/or protocols,
* you may either either {@link ng.$sceDelegateProvider#resourceUrlWhitelist whitelist them} or
* {@link ng.$sce#trustAsResourceUrl wrap it} into a trusted value. Refer Angular's {@link
* ng.$sce Strict Contextual Escaping}.
* - in addition, the browser's
* {@link https://code.google.com/p/browsersec/wiki/Part2#Same-origin_policy_for_XMLHttpRequest
* Same Origin Policy} and {@link http://www.w3.org/TR/cors/ Cross-Origin Resource Sharing
* (CORS)} policy apply that may further restrict whether the template is successfully loaded.
* (e.g. ngInclude won't work for cross-domain requests on all browsers and for `file://`
* access on some browsers)
*
* @animations
* enter - animation is used to bring new content into the browser.
* leave - animation is used to animate existing content away.
*
* The enter and leave animation occur concurrently.
*
* @scope
*
* @param {string} ngInclude|src angular expression evaluating to URL. If the source is a string constant,
* make sure you wrap it in quotes, e.g. `src="'myPartialTemplate.html'"`.
* @param {string=} onload Expression to evaluate when a new partial is loaded.
*
* @param {string=} autoscroll Whether `ngInclude` should call {@link ng.$anchorScroll
* $anchorScroll} to scroll the viewport after the content is loaded.
*
* - If the attribute is not set, disable scrolling.
* - If the attribute is set without value, enable scrolling.
* - Otherwise enable scrolling only if the expression evaluates to truthy value.
*
* @example
<example animations="true">
<file name="index.html">
<div ng-controller="Ctrl">
<select ng-model="template" ng-options="t.name for t in templates">
<option value="">(blank)</option>
</select>
url of the template: <tt>{{template.url}}</tt>
<hr/>
<div class="example-animate-container">
<div class="include-example" ng-include="template.url"></div>
</div>
</div>
</file>
<file name="script.js">
function Ctrl($scope) {
$scope.templates =
[ { name: 'template1.html', url: 'template1.html'}
, { name: 'template2.html', url: 'template2.html'} ];
$scope.template = $scope.templates[0];
}
</file>
<file name="template1.html">
Content of template1.html
</file>
<file name="template2.html">
Content of template2.html
</file>
<file name="animations.css">
.example-animate-container {
position:relative;
background:white;
border:1px solid black;
height:40px;
overflow:hidden;
}
.example-animate-container > div {
padding:10px;
}
.include-example.ng-enter, .include-example.ng-leave {
-webkit-transition:all cubic-bezier(0.250, 0.460, 0.450, 0.940) 0.5s;
-moz-transition:all cubic-bezier(0.250, 0.460, 0.450, 0.940) 0.5s;
-o-transition:all cubic-bezier(0.250, 0.460, 0.450, 0.940) 0.5s;
transition:all cubic-bezier(0.250, 0.460, 0.450, 0.940) 0.5s;
position:absolute;
top:0;
left:0;
right:0;
bottom:0;
display:block;
padding:10px;
}
.include-example.ng-enter {
top:-50px;
}
.include-example.ng-enter.ng-enter-active {
top:0;
}
.include-example.ng-leave {
top:0;
}
.include-example.ng-leave.ng-leave-active {
top:50px;
}
</file>
<file name="scenario.js">
it('should load template1.html', function() {
expect(element('.doc-example-live [ng-include]').text()).
toMatch(/Content of template1.html/);
});
it('should load template2.html', function() {
select('template').option('1');
expect(element('.doc-example-live [ng-include]').text()).
toMatch(/Content of template2.html/);
});
it('should change to blank', function() {
select('template').option('');
expect(element('.doc-example-live [ng-include]')).toBe(undefined);
});
</file>
</example>
*/
/**
* @ngdoc event
* @name ng.directive:ngInclude#$includeContentRequested
* @eventOf ng.directive:ngInclude
* @eventType emit on the scope ngInclude was declared in
* @description
* Emitted every time the ngInclude content is requested.
*/
/**
* @ngdoc event
* @name ng.directive:ngInclude#$includeContentLoaded
* @eventOf ng.directive:ngInclude
* @eventType emit on the current ngInclude scope
* @description
* Emitted every time the ngInclude content is reloaded.
*/
var NG_INCLUDE_PRIORITY = 500;
var ngIncludeDirective = ['$http', '$templateCache', '$anchorScroll', '$compile', '$animate', '$sce',
function($http, $templateCache, $anchorScroll, $compile, $animate, $sce) {
return {
restrict: 'ECA',
terminal: true,
priority: NG_INCLUDE_PRIORITY,
compile: function(element, attr) {
var srcExp = attr.ngInclude || attr.src,
onloadExp = attr.onload || '',
autoScrollExp = attr.autoscroll;
element.html('');
var anchor = jqLite(document.createComment(' ngInclude: ' + srcExp + ' '));
element.replaceWith(anchor);
return function(scope) {
var changeCounter = 0,
currentScope,
currentElement;
var cleanupLastIncludeContent = function() {
if (currentScope) {
currentScope.$destroy();
currentScope = null;
}
if(currentElement) {
$animate.leave(currentElement);
currentElement = null;
}
};
scope.$watch($sce.parseAsResourceUrl(srcExp), function ngIncludeWatchAction(src) {
var thisChangeId = ++changeCounter;
if (src) {
$http.get(src, {cache: $templateCache}).success(function(response) {
if (thisChangeId !== changeCounter) return;
var newScope = scope.$new();
cleanupLastIncludeContent();
currentScope = newScope;
currentElement = element.clone();
currentElement.html(response);
$animate.enter(currentElement, null, anchor);
$compile(currentElement, false, NG_INCLUDE_PRIORITY - 1)(currentScope);
if (isDefined(autoScrollExp) && (!autoScrollExp || scope.$eval(autoScrollExp))) {
$anchorScroll();
}
currentScope.$emit('$includeContentLoaded');
scope.$eval(onloadExp);
}).error(function() {
if (thisChangeId === changeCounter) cleanupLastIncludeContent();
});
scope.$emit('$includeContentRequested');
} else {
cleanupLastIncludeContent();
}
});
};
}
};
}];
/**
* @ngdoc directive
* @name ng.directive:ngInit
*
* @description
* The `ngInit` directive specifies initialization tasks to be executed
* before the template enters execution mode during bootstrap.
*
* @element ANY
* @param {expression} ngInit {@link guide/expression Expression} to eval.
*
* @example
<doc:example>
<doc:source>
<div ng-init="greeting='Hello'; person='World'">
{{greeting}} {{person}}!
</div>
</doc:source>
<doc:scenario>
it('should check greeting', function() {
expect(binding('greeting')).toBe('Hello');
expect(binding('person')).toBe('World');
});
</doc:scenario>
</doc:example>
*/
var ngInitDirective = ngDirective({
compile: function() {
return {
pre: function(scope, element, attrs) {
scope.$eval(attrs.ngInit);
}
}
}
});
/**
* @ngdoc directive
* @name ng.directive:ngNonBindable
* @priority 1000
*
* @description
* Sometimes it is necessary to write code which looks like bindings but which should be left alone
* by angular. Use `ngNonBindable` to make angular ignore a chunk of HTML.
*
* @element ANY
*
* @example
* In this example there are two location where a simple binding (`{{}}`) is present, but the one
* wrapped in `ngNonBindable` is left alone.
*
* @example
<doc:example>
<doc:source>
<div>Normal: {{1 + 2}}</div>
<div ng-non-bindable>Ignored: {{1 + 2}}</div>
</doc:source>
<doc:scenario>
it('should check ng-non-bindable', function() {
expect(using('.doc-example-live').binding('1 + 2')).toBe('3');
expect(using('.doc-example-live').element('div:last').text()).
toMatch(/1 \+ 2/);
});
</doc:scenario>
</doc:example>
*/
var ngNonBindableDirective = ngDirective({ terminal: true, priority: 1000 });
/**
* @ngdoc directive
* @name ng.directive:ngPluralize
* @restrict EA
*
* @description
* # Overview
* `ngPluralize` is a directive that displays messages according to en-US localization rules.
* These rules are bundled with angular.js, but can be overridden
* (see {@link guide/i18n Angular i18n} dev guide). You configure ngPluralize directive
* by specifying the mappings between
* {@link http://unicode.org/repos/cldr-tmp/trunk/diff/supplemental/language_plural_rules.html
* plural categories} and the strings to be displayed.
*
* # Plural categories and explicit number rules
* There are two
* {@link http://unicode.org/repos/cldr-tmp/trunk/diff/supplemental/language_plural_rules.html
* plural categories} in Angular's default en-US locale: "one" and "other".
*
* While a plural category may match many numbers (for example, in en-US locale, "other" can match
* any number that is not 1), an explicit number rule can only match one number. For example, the
* explicit number rule for "3" matches the number 3. There are examples of plural categories
* and explicit number rules throughout the rest of this documentation.
*
* # Configuring ngPluralize
* You configure ngPluralize by providing 2 attributes: `count` and `when`.
* You can also provide an optional attribute, `offset`.
*
* The value of the `count` attribute can be either a string or an {@link guide/expression
* Angular expression}; these are evaluated on the current scope for its bound value.
*
* The `when` attribute specifies the mappings between plural categories and the actual
* string to be displayed. The value of the attribute should be a JSON object.
*
* The following example shows how to configure ngPluralize:
*
* <pre>
* <ng-pluralize count="personCount"
when="{'0': 'Nobody is viewing.',
* 'one': '1 person is viewing.',
* 'other': '{} people are viewing.'}">
* </ng-pluralize>
*</pre>
*
* In the example, `"0: Nobody is viewing."` is an explicit number rule. If you did not
* specify this rule, 0 would be matched to the "other" category and "0 people are viewing"
* would be shown instead of "Nobody is viewing". You can specify an explicit number rule for
* other numbers, for example 12, so that instead of showing "12 people are viewing", you can
* show "a dozen people are viewing".
*
* You can use a set of closed braces(`{}`) as a placeholder for the number that you want substituted
* into pluralized strings. In the previous example, Angular will replace `{}` with
* <span ng-non-bindable>`{{personCount}}`</span>. The closed braces `{}` is a placeholder
* for <span ng-non-bindable>{{numberExpression}}</span>.
*
* # Configuring ngPluralize with offset
* The `offset` attribute allows further customization of pluralized text, which can result in
* a better user experience. For example, instead of the message "4 people are viewing this document",
* you might display "John, Kate and 2 others are viewing this document".
* The offset attribute allows you to offset a number by any desired value.
* Let's take a look at an example:
*
* <pre>
* <ng-pluralize count="personCount" offset=2
* when="{'0': 'Nobody is viewing.',
* '1': '{{person1}} is viewing.',
* '2': '{{person1}} and {{person2}} are viewing.',
* 'one': '{{person1}}, {{person2}} and one other person are viewing.',
* 'other': '{{person1}}, {{person2}} and {} other people are viewing.'}">
* </ng-pluralize>
* </pre>
*
* Notice that we are still using two plural categories(one, other), but we added
* three explicit number rules 0, 1 and 2.
* When one person, perhaps John, views the document, "John is viewing" will be shown.
* When three people view the document, no explicit number rule is found, so
* an offset of 2 is taken off 3, and Angular uses 1 to decide the plural category.
* In this case, plural category 'one' is matched and "John, Marry and one other person are viewing"
* is shown.
*
* Note that when you specify offsets, you must provide explicit number rules for
* numbers from 0 up to and including the offset. If you use an offset of 3, for example,
* you must provide explicit number rules for 0, 1, 2 and 3. You must also provide plural strings for
* plural categories "one" and "other".
*
* @param {string|expression} count The variable to be bounded to.
* @param {string} when The mapping between plural category to its corresponding strings.
* @param {number=} offset Offset to deduct from the total number.
*
* @example
<doc:example>
<doc:source>
<script>
function Ctrl($scope) {
$scope.person1 = 'Igor';
$scope.person2 = 'Misko';
$scope.personCount = 1;
}
</script>
<div ng-controller="Ctrl">
Person 1:<input type="text" ng-model="person1" value="Igor" /><br/>
Person 2:<input type="text" ng-model="person2" value="Misko" /><br/>
Number of People:<input type="text" ng-model="personCount" value="1" /><br/>
<!--- Example with simple pluralization rules for en locale --->
Without Offset:
<ng-pluralize count="personCount"
when="{'0': 'Nobody is viewing.',
'one': '1 person is viewing.',
'other': '{} people are viewing.'}">
</ng-pluralize><br>
<!--- Example with offset --->
With Offset(2):
<ng-pluralize count="personCount" offset=2
when="{'0': 'Nobody is viewing.',
'1': '{{person1}} is viewing.',
'2': '{{person1}} and {{person2}} are viewing.',
'one': '{{person1}}, {{person2}} and one other person are viewing.',
'other': '{{person1}}, {{person2}} and {} other people are viewing.'}">
</ng-pluralize>
</div>
</doc:source>
<doc:scenario>
it('should show correct pluralized string', function() {
expect(element('.doc-example-live ng-pluralize:first').text()).
toBe('1 person is viewing.');
expect(element('.doc-example-live ng-pluralize:last').text()).
toBe('Igor is viewing.');
using('.doc-example-live').input('personCount').enter('0');
expect(element('.doc-example-live ng-pluralize:first').text()).
toBe('Nobody is viewing.');
expect(element('.doc-example-live ng-pluralize:last').text()).
toBe('Nobody is viewing.');
using('.doc-example-live').input('personCount').enter('2');
expect(element('.doc-example-live ng-pluralize:first').text()).
toBe('2 people are viewing.');
expect(element('.doc-example-live ng-pluralize:last').text()).
toBe('Igor and Misko are viewing.');
using('.doc-example-live').input('personCount').enter('3');
expect(element('.doc-example-live ng-pluralize:first').text()).
toBe('3 people are viewing.');
expect(element('.doc-example-live ng-pluralize:last').text()).
toBe('Igor, Misko and one other person are viewing.');
using('.doc-example-live').input('personCount').enter('4');
expect(element('.doc-example-live ng-pluralize:first').text()).
toBe('4 people are viewing.');
expect(element('.doc-example-live ng-pluralize:last').text()).
toBe('Igor, Misko and 2 other people are viewing.');
});
it('should show data-binded names', function() {
using('.doc-example-live').input('personCount').enter('4');
expect(element('.doc-example-live ng-pluralize:last').text()).
toBe('Igor, Misko and 2 other people are viewing.');
using('.doc-example-live').input('person1').enter('Di');
using('.doc-example-live').input('person2').enter('Vojta');
expect(element('.doc-example-live ng-pluralize:last').text()).
toBe('Di, Vojta and 2 other people are viewing.');
});
</doc:scenario>
</doc:example>
*/
var ngPluralizeDirective = ['$locale', '$interpolate', function($locale, $interpolate) {
var BRACE = /{}/g;
return {
restrict: 'EA',
link: function(scope, element, attr) {
var numberExp = attr.count,
whenExp = attr.$attr.when && element.attr(attr.$attr.when), // we have {{}} in attrs
offset = attr.offset || 0,
whens = scope.$eval(whenExp) || {},
whensExpFns = {},
startSymbol = $interpolate.startSymbol(),
endSymbol = $interpolate.endSymbol(),
isWhen = /^when(Minus)?(.+)$/;
forEach(attr, function(expression, attributeName) {
if (isWhen.test(attributeName)) {
whens[lowercase(attributeName.replace('when', '').replace('Minus', '-'))] =
element.attr(attr.$attr[attributeName]);
}
});
forEach(whens, function(expression, key) {
whensExpFns[key] =
$interpolate(expression.replace(BRACE, startSymbol + numberExp + '-' +
offset + endSymbol));
});
scope.$watch(function ngPluralizeWatch() {
var value = parseFloat(scope.$eval(numberExp));
if (!isNaN(value)) {
//if explicit number rule such as 1, 2, 3... is defined, just use it. Otherwise,
//check it against pluralization rules in $locale service
if (!(value in whens)) value = $locale.pluralCat(value - offset);
return whensExpFns[value](scope, element, true);
} else {
return '';
}
}, function ngPluralizeWatchAction(newVal) {
element.text(newVal);
});
}
};
}];
/**
* @ngdoc directive
* @name ng.directive:ngRepeat
*
* @description
* The `ngRepeat` directive instantiates a template once per item from a collection. Each template
* instance gets its own scope, where the given loop variable is set to the current collection item,
* and `$index` is set to the item index or key.
*
* Special properties are exposed on the local scope of each template instance, including:
*
* | Variable | Type | Details |
* |-----------|-----------------|-----------------------------------------------------------------------------|
* | `$index` | {@type number} | iterator offset of the repeated element (0..length-1) |
* | `$first` | {@type boolean} | true if the repeated element is first in the iterator. |
* | `$middle` | {@type boolean} | true if the repeated element is between the first and last in the iterator. |
* | `$last` | {@type boolean} | true if the repeated element is last in the iterator. |
* | `$even` | {@type boolean} | true if the iterator position `$index` is even (otherwise false). |
* | `$odd` | {@type boolean} | true if the iterator position `$index` is odd (otherwise false). |
*
*
* # Special repeat start and end points
* To repeat a series of elements instead of just one parent element, ngRepeat (as well as other ng directives) supports extending
* the range of the repeater by defining explicit start and end points by using **ng-repeat-start** and **ng-repeat-end** respectively.
* The **ng-repeat-start** directive works the same as **ng-repeat**, but will repeat all the HTML code (including the tag it's defined on)
* up to and including the ending HTML tag where **ng-repeat-end** is placed.
*
* The example below makes use of this feature:
* <pre>
* <header ng-repeat-start="item in items">
* Header {{ item }}
* </header>
* <div class="body">
* Body {{ item }}
* </div>
* <footer ng-repeat-end>
* Footer {{ item }}
* </footer>
* </pre>
*
* And with an input of {@type ['A','B']} for the items variable in the example above, the output will evaluate to:
* <pre>
* <header>
* Header A
* </header>
* <div class="body">
* Body A
* </div>
* <footer>
* Footer A
* </footer>
* <header>
* Header B
* </header>
* <div class="body">
* Body B
* </div>
* <footer>
* Footer B
* </footer>
* </pre>
*
* The custom start and end points for ngRepeat also support all other HTML directive syntax flavors provided in AngularJS (such
* as **data-ng-repeat-start**, **x-ng-repeat-start** and **ng:repeat-start**).
*
* @animations
* enter - when a new item is added to the list or when an item is revealed after a filter
* leave - when an item is removed from the list or when an item is filtered out
* move - when an adjacent item is filtered out causing a reorder or when the item contents are reordered
*
* @element ANY
* @scope
* @priority 1000
* @param {repeat_expression} ngRepeat The expression indicating how to enumerate a collection. These
* formats are currently supported:
*
* * `variable in expression` – where variable is the user defined loop variable and `expression`
* is a scope expression giving the collection to enumerate.
*
* For example: `album in artist.albums`.
*
* * `(key, value) in expression` – where `key` and `value` can be any user defined identifiers,
* and `expression` is the scope expression giving the collection to enumerate.
*
* For example: `(name, age) in {'adam':10, 'amalie':12}`.
*
* * `variable in expression track by tracking_expression` – You can also provide an optional tracking function
* which can be used to associate the objects in the collection with the DOM elements. If no tracking function
* is specified the ng-repeat associates elements by identity in the collection. It is an error to have
* more than one tracking function to resolve to the same key. (This would mean that two distinct objects are
* mapped to the same DOM element, which is not possible.) Filters should be applied to the expression,
* before specifying a tracking expression.
*
* For example: `item in items` is equivalent to `item in items track by $id(item)'. This implies that the DOM elements
* will be associated by item identity in the array.
*
* For example: `item in items track by $id(item)`. A built in `$id()` function can be used to assign a unique
* `$$hashKey` property to each item in the array. This property is then used as a key to associated DOM elements
* with the corresponding item in the array by identity. Moving the same object in array would move the DOM
* element in the same way ian the DOM.
*
* For example: `item in items track by item.id` is a typical pattern when the items come from the database. In this
* case the object identity does not matter. Two objects are considered equivalent as long as their `id`
* property is same.
*
* For example: `item in items | filter:searchText track by item.id` is a pattern that might be used to apply a filter
* to items in conjunction with a tracking expression.
*
* @example
* This example initializes the scope to a list of names and
* then uses `ngRepeat` to display every person:
<example animations="true">
<file name="index.html">
<div ng-init="friends = [
{name:'John', age:25, gender:'boy'},
{name:'Jessie', age:30, gender:'girl'},
{name:'Johanna', age:28, gender:'girl'},
{name:'Joy', age:15, gender:'girl'},
{name:'Mary', age:28, gender:'girl'},
{name:'Peter', age:95, gender:'boy'},
{name:'Sebastian', age:50, gender:'boy'},
{name:'Erika', age:27, gender:'girl'},
{name:'Patrick', age:40, gender:'boy'},
{name:'Samantha', age:60, gender:'girl'}
]">
I have {{friends.length}} friends. They are:
<input type="search" ng-model="q" placeholder="filter friends..." />
<ul class="example-animate-container">
<li class="animate-repeat" ng-repeat="friend in friends | filter:q">
[{{$index + 1}}] {{friend.name}} who is {{friend.age}} years old.
</li>
</ul>
</div>
</file>
<file name="animations.css">
.example-animate-container {
background:white;
border:1px solid black;
list-style:none;
margin:0;
padding:0;
}
.example-animate-container > li {
padding:10px;
list-style:none;
}
.animate-repeat.ng-enter,
.animate-repeat.ng-leave,
.animate-repeat.ng-move {
-webkit-transition:all linear 0.5s;
-moz-transition:all linear 0.5s;
-o-transition:all linear 0.5s;
transition:all linear 0.5s;
}
.animate-repeat.ng-enter {
line-height:0;
opacity:0;
padding-top:0;
padding-bottom:0;
}
.animate-repeat.ng-enter.ng-enter-active {
line-height:20px;
opacity:1;
padding:10px;
}
.animate-repeat.ng-leave {
opacity:1;
line-height:20px;
padding:10px;
}
.animate-repeat.ng-leave.ng-leave-active {
opacity:0;
line-height:0;
padding-top:0;
padding-bottom:0;
}
.animate-repeat.ng-move { }
.animate-repeat.ng-move.ng-move-active { }
</file>
<file name="scenario.js">
it('should render initial data set', function() {
var r = using('.doc-example-live').repeater('ul li');
expect(r.count()).toBe(10);
expect(r.row(0)).toEqual(["1","John","25"]);
expect(r.row(1)).toEqual(["2","Jessie","30"]);
expect(r.row(9)).toEqual(["10","Samantha","60"]);
expect(binding('friends.length')).toBe("10");
});
it('should update repeater when filter predicate changes', function() {
var r = using('.doc-example-live').repeater('ul li');
expect(r.count()).toBe(10);
input('q').enter('ma');
expect(r.count()).toBe(2);
expect(r.row(0)).toEqual(["1","Mary","28"]);
expect(r.row(1)).toEqual(["2","Samantha","60"]);
});
</file>
</example>
*/
var ngRepeatDirective = ['$parse', '$animate', function($parse, $animate) {
var NG_REMOVED = '$$NG_REMOVED';
var ngRepeatMinErr = minErr('ngRepeat');
return {
transclude: 'element',
priority: 1000,
terminal: true,
compile: function(element, attr, linker) {
return function($scope, $element, $attr){
var expression = $attr.ngRepeat;
var match = expression.match(/^\s*(.+)\s+in\s+(.*?)\s*(\s+track\s+by\s+(.+)\s*)?$/),
trackByExp, trackByExpGetter, trackByIdFn, trackByIdArrayFn, trackByIdObjFn, lhs, rhs, valueIdentifier, keyIdentifier,
hashFnLocals = {$id: hashKey};
if (!match) {
throw ngRepeatMinErr('iexp', "Expected expression in form of '_item_ in _collection_[ track by _id_]' but got '{0}'.",
expression);
}
lhs = match[1];
rhs = match[2];
trackByExp = match[4];
if (trackByExp) {
trackByExpGetter = $parse(trackByExp);
trackByIdFn = function(key, value, index) {
// assign key, value, and $index to the locals so that they can be used in hash functions
if (keyIdentifier) hashFnLocals[keyIdentifier] = key;
hashFnLocals[valueIdentifier] = value;
hashFnLocals.$index = index;
return trackByExpGetter($scope, hashFnLocals);
};
} else {
trackByIdArrayFn = function(key, value) {
return hashKey(value);
}
trackByIdObjFn = function(key) {
return key;
}
}
match = lhs.match(/^(?:([\$\w]+)|\(([\$\w]+)\s*,\s*([\$\w]+)\))$/);
if (!match) {
throw ngRepeatMinErr('iidexp', "'_item_' in '_item_ in _collection_' should be an identifier or '(_key_, _value_)' expression, but got '{0}'.",
lhs);
}
valueIdentifier = match[3] || match[1];
keyIdentifier = match[2];
// Store a list of elements from previous run. This is a hash where key is the item from the
// iterator, and the value is objects with following properties.
// - scope: bound scope
// - element: previous element.
// - index: position
var lastBlockMap = {};
//watch props
$scope.$watchCollection(rhs, function ngRepeatAction(collection){
var index, length,
previousNode = $element[0], // current position of the node
nextNode,
// Same as lastBlockMap but it has the current state. It will become the
// lastBlockMap on the next iteration.
nextBlockMap = {},
arrayLength,
childScope,
key, value, // key/value of iteration
trackById,
collectionKeys,
block, // last object information {scope, element, id}
nextBlockOrder = [];
if (isArrayLike(collection)) {
collectionKeys = collection;
trackByIdFn = trackByIdFn || trackByIdArrayFn;
} else {
trackByIdFn = trackByIdFn || trackByIdObjFn;
// if object, extract keys, sort them and use to determine order of iteration over obj props
collectionKeys = [];
for (key in collection) {
if (collection.hasOwnProperty(key) && key.charAt(0) != '$') {
collectionKeys.push(key);
}
}
collectionKeys.sort();
}
arrayLength = collectionKeys.length;
// locate existing items
length = nextBlockOrder.length = collectionKeys.length;
for(index = 0; index < length; index++) {
key = (collection === collectionKeys) ? index : collectionKeys[index];
value = collection[key];
trackById = trackByIdFn(key, value, index);
if(lastBlockMap.hasOwnProperty(trackById)) {
block = lastBlockMap[trackById]
delete lastBlockMap[trackById];
nextBlockMap[trackById] = block;
nextBlockOrder[index] = block;
} else if (nextBlockMap.hasOwnProperty(trackById)) {
// restore lastBlockMap
forEach(nextBlockOrder, function(block) {
if (block && block.startNode) lastBlockMap[block.id] = block;
});
// This is a duplicate and we need to throw an error
throw ngRepeatMinErr('dupes', "Duplicates in a repeater are not allowed. Use 'track by' expression to specify unique keys. Repeater: {0}, Duplicate key: {1}",
expression, trackById);
} else {
// new never before seen block
nextBlockOrder[index] = { id: trackById };
nextBlockMap[trackById] = false;
}
}
// remove existing items
for (key in lastBlockMap) {
if (lastBlockMap.hasOwnProperty(key)) {
block = lastBlockMap[key];
$animate.leave(block.elements);
forEach(block.elements, function(element) { element[NG_REMOVED] = true});
block.scope.$destroy();
}
}
// we are not using forEach for perf reasons (trying to avoid #call)
for (index = 0, length = collectionKeys.length; index < length; index++) {
key = (collection === collectionKeys) ? index : collectionKeys[index];
value = collection[key];
block = nextBlockOrder[index];
if (block.startNode) {
// if we have already seen this object, then we need to reuse the
// associated scope/element
childScope = block.scope;
nextNode = previousNode;
do {
nextNode = nextNode.nextSibling;
} while(nextNode && nextNode[NG_REMOVED]);
if (block.startNode == nextNode) {
// do nothing
} else {
// existing item which got moved
$animate.move(block.elements, null, jqLite(previousNode));
}
previousNode = block.endNode;
} else {
// new item which we don't know about
childScope = $scope.$new();
}
childScope[valueIdentifier] = value;
if (keyIdentifier) childScope[keyIdentifier] = key;
childScope.$index = index;
childScope.$first = (index === 0);
childScope.$last = (index === (arrayLength - 1));
childScope.$middle = !(childScope.$first || childScope.$last);
childScope.$odd = !(childScope.$even = index%2==0);
if (!block.startNode) {
linker(childScope, function(clone) {
$animate.enter(clone, null, jqLite(previousNode));
previousNode = clone;
block.scope = childScope;
block.startNode = clone[0];
block.elements = clone;
block.endNode = clone[clone.length - 1];
nextBlockMap[block.id] = block;
});
}
}
lastBlockMap = nextBlockMap;
});
};
}
};
}];
/**
* @ngdoc directive
* @name ng.directive:ngShow
*
* @description
* The `ngShow` directive shows and hides the given HTML element conditionally based on the expression
* provided to the ngShow attribute. The show and hide mechanism is a achieved by removing and adding
* the `ng-hide` CSS class onto the element. The `.ng-hide` CSS class is a predefined CSS class present
* in AngularJS which sets the display style to none (using an !important flag).
*
* <pre>
* <!-- when $scope.myValue is truthy (element is visible) -->
* <div ng-show="myValue"></div>
*
* <!-- when $scope.myValue is falsy (element is hidden) -->
* <div ng-show="myValue" class="ng-hide"></div>
* </pre>
*
* When the ngShow expression evaluates to false then the ng-hide CSS class is added to the class attribute
* on the element causing it to become hidden. When true, the ng-hide CSS class is removed
* from the element causing the element not to appear hidden.
*
* ## Why is !important used?
*
* You may be wondering why !important is used for the .ng-hide CSS class. This is because the `.ng-hide` selector
* can be easily overridden by heavier selectors. For example, something as simple
* as changing the display style on a HTML list item would make hidden elements appear visible.
* This also becomes a bigger issue when dealing with CSS frameworks.
*
* By using !important, the show and hide behavior will work as expected despite any clash between CSS selector
* specificity (when !important isn't used with any conflicting styles). If a developer chooses to override the
* styling to change how to hide an element then it is just a matter of using !important in their own CSS code.
*
* ### Overriding .ng-hide
*
* If you wish to change the hide behavior with ngShow/ngHide then this can be achieved by
* restating the styles for the .ng-hide class in CSS:
* <pre>
* .ng-hide {
* //!annotate CSS Specificity|Not to worry, this will override the AngularJS default...
* display:block!important;
*
* //this is just another form of hiding an element
* position:absolute;
* top:-9999px;
* left:-9999px;
* }
* </pre>
*
* Just remember to include the important flag so the CSS override will function.
*
* ## A note about animations with ngShow
*
* Animations in ngShow/ngHide work with the show and hide events that are triggered when the directive expression
* is true and false. This system works similar to the animation system present with ngClass, however, the
* only difference is that you must also include the !important flag to override the display property so
* that you can perform an animation when the element is hidden during the time of the animation.
*
* <pre>
* //
* //a working example can be found at the bottom of this page
* //
* .my-element.ng-hide-add, .my-element.ng-hide-remove {
* transition:0.5s linear all;
* display:block!important;
* }
*
* .my-element.ng-hide-add { ... }
* .my-element.ng-hide-add.ng-hide-add-active { ... }
* .my-element.ng-hide-remove { ... }
* .my-element.ng-hide-remove.ng-hide-remove-active { ... }
* </pre>
*
* @animations
* addClass: .ng-hide - happens after the ngShow expression evaluates to a truthy value and the just before contents are set to visible
* removeClass: .ng-hide - happens after the ngShow expression evaluates to a non truthy value and just before the contents are set to hidden
*
* @element ANY
* @param {expression} ngShow If the {@link guide/expression expression} is truthy
* then the element is shown or hidden respectively.
*
* @example
<example animations="true">
<file name="index.html">
Click me: <input type="checkbox" ng-model="checked"><br/>
<div>
Show:
<div class="check-element animate-show" ng-show="checked">
<span class="icon-thumbs-up"></span> I show up when your checkbox is checked.
</div>
</div>
<div>
Hide:
<div class="check-element animate-show" ng-hide="checked">
<span class="icon-thumbs-down"></span> I hide when your checkbox is checked.
</div>
</div>
</file>
<file name="animations.css">
.animate-show.ng-hide-add,
.animate-show.ng-hide-remove {
-webkit-transition:all linear 0.5s;
-moz-transition:all linear 0.5s;
-o-transition:all linear 0.5s;
transition:all linear 0.5s;
display:block!important;
}
.animate-show.ng-hide-add.ng-hide-add-active,
.animate-show.ng-hide-remove {
line-height:0;
opacity:0;
padding:0 10px;
}
.animate-show.ng-hide-add,
.animate-show.ng-hide-remove.ng-hide-remove-active {
line-height:20px;
opacity:1;
padding:10px;
border:1px solid black;
background:white;
}
.check-element {
padding:10px;
border:1px solid black;
background:white;
}
</file>
<file name="scenario.js">
it('should check ng-show / ng-hide', function() {
expect(element('.doc-example-live span:first:hidden').count()).toEqual(1);
expect(element('.doc-example-live span:last:visible').count()).toEqual(1);
input('checked').check();
expect(element('.doc-example-live span:first:visible').count()).toEqual(1);
expect(element('.doc-example-live span:last:hidden').count()).toEqual(1);
});
</file>
</example>
*/
var ngShowDirective = ['$animate', function($animate) {
return function(scope, element, attr) {
scope.$watch(attr.ngShow, function ngShowWatchAction(value){
$animate[toBoolean(value) ? 'removeClass' : 'addClass'](element, 'ng-hide');
});
};
}];
/**
* @ngdoc directive
* @name ng.directive:ngHide
*
* @description
* The `ngHide` directive shows and hides the given HTML element conditionally based on the expression
* provided to the ngHide attribute. The show and hide mechanism is a achieved by removing and adding
* the `ng-hide` CSS class onto the element. The `.ng-hide` CSS class is a predefined CSS class present
* in AngularJS which sets the display style to none (using an !important flag).
*
* <pre>
* <!-- when $scope.myValue is truthy (element is hidden) -->
* <div ng-hide="myValue"></div>
*
* <!-- when $scope.myValue is falsy (element is visible) -->
* <div ng-hide="myValue" class="ng-hide"></div>
* </pre>
*
* When the ngHide expression evaluates to true then the .ng-hide CSS class is added to the class attribute
* on the element causing it to become hidden. When false, the ng-hide CSS class is removed
* from the element causing the element not to appear hidden.
*
* ## Why is !important used?
*
* You may be wondering why !important is used for the .ng-hide CSS class. This is because the `.ng-hide` selector
* can be easily overridden by heavier selectors. For example, something as simple
* as changing the display style on a HTML list item would make hidden elements appear visible.
* This also becomes a bigger issue when dealing with CSS frameworks.
*
* By using !important, the show and hide behavior will work as expected despite any clash between CSS selector
* specificity (when !important isn't used with any conflicting styles). If a developer chooses to override the
* styling to change how to hide an element then it is just a matter of using !important in their own CSS code.
*
* ### Overriding .ng-hide
*
* If you wish to change the hide behavior with ngShow/ngHide then this can be achieved by
* restating the styles for the .ng-hide class in CSS:
* <pre>
* .ng-hide {
* //!annotate CSS Specificity|Not to worry, this will override the AngularJS default...
* display:block!important;
*
* //this is just another form of hiding an element
* position:absolute;
* top:-9999px;
* left:-9999px;
* }
* </pre>
*
* Just remember to include the important flag so the CSS override will function.
*
* ## A note about animations with ngHide
*
* Animations in ngShow/ngHide work with the show and hide events that are triggered when the directive expression
* is true and false. This system works similar to the animation system present with ngClass, however, the
* only difference is that you must also include the !important flag to override the display property so
* that you can perform an animation when the element is hidden during the time of the animation.
*
* <pre>
* //
* //a working example can be found at the bottom of this page
* //
* .my-element.ng-hide-add, .my-element.ng-hide-remove {
* transition:0.5s linear all;
* display:block!important;
* }
*
* .my-element.ng-hide-add { ... }
* .my-element.ng-hide-add.ng-hide-add-active { ... }
* .my-element.ng-hide-remove { ... }
* .my-element.ng-hide-remove.ng-hide-remove-active { ... }
* </pre>
*
* @animations
* removeClass: .ng-hide - happens after the ngHide expression evaluates to a truthy value and just before the contents are set to hidden
* addClass: .ng-hide - happens after the ngHide expression evaluates to a non truthy value and just before the contents are set to visible
*
* @element ANY
* @param {expression} ngHide If the {@link guide/expression expression} is truthy then
* the element is shown or hidden respectively.
*
* @example
<example animations="true">
<file name="index.html">
Click me: <input type="checkbox" ng-model="checked"><br/>
<div>
Show:
<div class="check-element animate-hide" ng-show="checked">
<span class="icon-thumbs-up"></span> I show up when your checkbox is checked.
</div>
</div>
<div>
Hide:
<div class="check-element animate-hide" ng-hide="checked">
<span class="icon-thumbs-down"></span> I hide when your checkbox is checked.
</div>
</div>
</file>
<file name="animations.css">
.animate-hide.ng-hide-add,
.animate-hide.ng-hide-remove {
-webkit-transition:all linear 0.5s;
-moz-transition:all linear 0.5s;
-o-transition:all linear 0.5s;
transition:all linear 0.5s;
display:block!important;
}
.animate-hide.ng-hide-add.ng-hide-add-active,
.animate-hide.ng-hide-remove {
line-height:0;
opacity:0;
padding:0 10px;
}
.animate-hide.ng-hide-add,
.animate-hide.ng-hide-remove.ng-hide-remove-active {
line-height:20px;
opacity:1;
padding:10px;
border:1px solid black;
background:white;
}
.check-element {
padding:10px;
border:1px solid black;
background:white;
}
</file>
<file name="scenario.js">
it('should check ng-show / ng-hide', function() {
expect(element('.doc-example-live .check-element:first:hidden').count()).toEqual(1);
expect(element('.doc-example-live .check-element:last:visible').count()).toEqual(1);
input('checked').check();
expect(element('.doc-example-live .check-element:first:visible').count()).toEqual(1);
expect(element('.doc-example-live .check-element:last:hidden').count()).toEqual(1);
});
</file>
</example>
*/
var ngHideDirective = ['$animate', function($animate) {
return function(scope, element, attr) {
scope.$watch(attr.ngHide, function ngHideWatchAction(value){
$animate[toBoolean(value) ? 'addClass' : 'removeClass'](element, 'ng-hide');
});
};
}];
/**
* @ngdoc directive
* @name ng.directive:ngStyle
*
* @description
* The `ngStyle` directive allows you to set CSS style on an HTML element conditionally.
*
* @element ANY
* @param {expression} ngStyle {@link guide/expression Expression} which evals to an
* object whose keys are CSS style names and values are corresponding values for those CSS
* keys.
*
* @example
<example>
<file name="index.html">
<input type="button" value="set" ng-click="myStyle={color:'red'}">
<input type="button" value="clear" ng-click="myStyle={}">
<br/>
<span ng-style="myStyle">Sample Text</span>
<pre>myStyle={{myStyle}}</pre>
</file>
<file name="style.css">
span {
color: black;
}
</file>
<file name="scenario.js">
it('should check ng-style', function() {
expect(element('.doc-example-live span').css('color')).toBe('rgb(0, 0, 0)');
element('.doc-example-live :button[value=set]').click();
expect(element('.doc-example-live span').css('color')).toBe('rgb(255, 0, 0)');
element('.doc-example-live :button[value=clear]').click();
expect(element('.doc-example-live span').css('color')).toBe('rgb(0, 0, 0)');
});
</file>
</example>
*/
var ngStyleDirective = ngDirective(function(scope, element, attr) {
scope.$watch(attr.ngStyle, function ngStyleWatchAction(newStyles, oldStyles) {
if (oldStyles && (newStyles !== oldStyles)) {
forEach(oldStyles, function(val, style) { element.css(style, '');});
}
if (newStyles) element.css(newStyles);
}, true);
});
/**
* @ngdoc directive
* @name ng.directive:ngSwitch
* @restrict EA
*
* @description
* The ngSwitch directive is used to conditionally swap DOM structure on your template based on a scope expression.
* Elements within ngSwitch but without ngSwitchWhen or ngSwitchDefault directives will be preserved at the location
* as specified in the template.
*
* The directive itself works similar to ngInclude, however, instead of downloading template code (or loading it
* from the template cache), ngSwitch simply choses one of the nested elements and makes it visible based on which element
* matches the value obtained from the evaluated expression. In other words, you define a container element
* (where you place the directive), place an expression on the **on="..." attribute**
* (or the **ng-switch="..." attribute**), define any inner elements inside of the directive and place
* a when attribute per element. The when attribute is used to inform ngSwitch which element to display when the on
* expression is evaluated. If a matching expression is not found via a when attribute then an element with the default
* attribute is displayed.
*
* @animations
* enter - happens after the ngSwtich contents change and the matched child element is placed inside the container
* leave - happens just after the ngSwitch contents change and just before the former contents are removed from the DOM
*
* @usage
* <ANY ng-switch="expression">
* <ANY ng-switch-when="matchValue1">...</ANY>
* <ANY ng-switch-when="matchValue2">...</ANY>
* <ANY ng-switch-default>...</ANY>
* </ANY>
*
* @scope
* @param {*} ngSwitch|on expression to match against <tt>ng-switch-when</tt>.
* @paramDescription
* On child elements add:
*
* * `ngSwitchWhen`: the case statement to match against. If match then this
* case will be displayed. If the same match appears multiple times, all the
* elements will be displayed.
* * `ngSwitchDefault`: the default case when no other case match. If there
* are multiple default cases, all of them will be displayed when no other
* case match.
*
*
* @example
<example animations="true">
<file name="index.html">
<div ng-controller="Ctrl">
<select ng-model="selection" ng-options="item for item in items">
</select>
<tt>selection={{selection}}</tt>
<hr/>
<div class="animate-switch-container"
ng-switch on="selection">
<div ng-switch-when="settings">Settings Div</div>
<div ng-switch-when="home">Home Span</div>
<div ng-switch-default>default</div>
</div>
</div>
</file>
<file name="script.js">
function Ctrl($scope) {
$scope.items = ['settings', 'home', 'other'];
$scope.selection = $scope.items[0];
}
</file>
<file name="animations.css">
.animate-switch-container {
position:relative;
background:white;
border:1px solid black;
height:40px;
overflow:hidden;
}
.animate-switch-container > div {
padding:10px;
}
.animate-switch-container > .ng-enter,
.animate-switch-container > .ng-leave {
-webkit-transition:all cubic-bezier(0.250, 0.460, 0.450, 0.940) 0.5s;
-moz-transition:all cubic-bezier(0.250, 0.460, 0.450, 0.940) 0.5s;
-o-transition:all cubic-bezier(0.250, 0.460, 0.450, 0.940) 0.5s;
transition:all cubic-bezier(0.250, 0.460, 0.450, 0.940) 0.5s;
position:absolute;
top:0;
left:0;
right:0;
bottom:0;
}
.animate-switch-container > .ng-enter {
top:-50px;
}
.animate-switch-container > .ng-enter.ng-enter-active {
top:0;
}
.animate-switch-container > .ng-leave {
top:0;
}
.animate-switch-container > .ng-leave.ng-leave-active {
top:50px;
}
</file>
<file name="scenario.js">
it('should start in settings', function() {
expect(element('.doc-example-live [ng-switch]').text()).toMatch(/Settings Div/);
});
it('should change to home', function() {
select('selection').option('home');
expect(element('.doc-example-live [ng-switch]').text()).toMatch(/Home Span/);
});
it('should select default', function() {
select('selection').option('other');
expect(element('.doc-example-live [ng-switch]').text()).toMatch(/default/);
});
</file>
</example>
*/
var ngSwitchDirective = ['$animate', function($animate) {
return {
restrict: 'EA',
require: 'ngSwitch',
// asks for $scope to fool the BC controller module
controller: ['$scope', function ngSwitchController() {
this.cases = {};
}],
link: function(scope, element, attr, ngSwitchController) {
var watchExpr = attr.ngSwitch || attr.on,
selectedTranscludes,
selectedElements,
selectedScopes = [];
scope.$watch(watchExpr, function ngSwitchWatchAction(value) {
for (var i= 0, ii=selectedScopes.length; i<ii; i++) {
selectedScopes[i].$destroy();
$animate.leave(selectedElements[i]);
}
selectedElements = [];
selectedScopes = [];
if ((selectedTranscludes = ngSwitchController.cases['!' + value] || ngSwitchController.cases['?'])) {
scope.$eval(attr.change);
forEach(selectedTranscludes, function(selectedTransclude) {
var selectedScope = scope.$new();
selectedScopes.push(selectedScope);
selectedTransclude.transclude(selectedScope, function(caseElement) {
var anchor = selectedTransclude.element;
selectedElements.push(caseElement);
$animate.enter(caseElement, anchor.parent(), anchor);
});
});
}
});
}
}
}];
var ngSwitchWhenDirective = ngDirective({
transclude: 'element',
priority: 500,
require: '^ngSwitch',
compile: function(element, attrs, transclude) {
return function(scope, element, attr, ctrl) {
ctrl.cases['!' + attrs.ngSwitchWhen] = (ctrl.cases['!' + attrs.ngSwitchWhen] || []);
ctrl.cases['!' + attrs.ngSwitchWhen].push({ transclude: transclude, element: element });
};
}
});
var ngSwitchDefaultDirective = ngDirective({
transclude: 'element',
priority: 500,
require: '^ngSwitch',
compile: function(element, attrs, transclude) {
return function(scope, element, attr, ctrl) {
ctrl.cases['?'] = (ctrl.cases['?'] || []);
ctrl.cases['?'].push({ transclude: transclude, element: element });
};
}
});
/**
* @ngdoc directive
* @name ng.directive:ngTransclude
*
* @description
* Insert the transcluded DOM here.
*
* @element ANY
*
* @example
<doc:example module="transclude">
<doc:source>
<script>
function Ctrl($scope) {
$scope.title = 'Lorem Ipsum';
$scope.text = 'Neque porro quisquam est qui dolorem ipsum quia dolor...';
}
angular.module('transclude', [])
.directive('pane', function(){
return {
restrict: 'E',
transclude: true,
scope: { title:'@' },
template: '<div style="border: 1px solid black;">' +
'<div style="background-color: gray">{{title}}</div>' +
'<div ng-transclude></div>' +
'</div>'
};
});
</script>
<div ng-controller="Ctrl">
<input ng-model="title"><br>
<textarea ng-model="text"></textarea> <br/>
<pane title="{{title}}">{{text}}</pane>
</div>
</doc:source>
<doc:scenario>
it('should have transcluded', function() {
input('title').enter('TITLE');
input('text').enter('TEXT');
expect(binding('title')).toEqual('TITLE');
expect(binding('text')).toEqual('TEXT');
});
</doc:scenario>
</doc:example>
*
*/
var ngTranscludeDirective = ngDirective({
controller: ['$transclude', '$element', '$scope', function($transclude, $element, $scope) {
// use evalAsync so that we don't process transclusion before directives on the parent element even when the
// transclusion replaces the current element. (we can't use priority here because that applies only to compile fns
// and not controllers
$scope.$evalAsync(function() {
$transclude(function(clone) {
$element.append(clone);
});
});
}]
});
/**
* @ngdoc directive
* @name ng.directive:script
*
* @description
* Load content of a script tag, with type `text/ng-template`, into `$templateCache`, so that the
* template can be used by `ngInclude`, `ngView` or directive templates.
*
* @restrict E
* @param {'text/ng-template'} type must be set to `'text/ng-template'`
*
* @example
<doc:example>
<doc:source>
<script type="text/ng-template" id="/tpl.html">
Content of the template.
</script>
<a ng-click="currentTpl='/tpl.html'" id="tpl-link">Load inlined template</a>
<div id="tpl-content" ng-include src="currentTpl"></div>
</doc:source>
<doc:scenario>
it('should load template defined inside script tag', function() {
element('#tpl-link').click();
expect(element('#tpl-content').text()).toMatch(/Content of the template/);
});
</doc:scenario>
</doc:example>
*/
var scriptDirective = ['$templateCache', function($templateCache) {
return {
restrict: 'E',
terminal: true,
compile: function(element, attr) {
if (attr.type == 'text/ng-template') {
var templateUrl = attr.id,
// IE is not consistent, in scripts we have to read .text but in other nodes we have to read .textContent
text = element[0].text;
$templateCache.put(templateUrl, text);
}
}
};
}];
/**
* @ngdoc directive
* @name ng.directive:select
* @restrict E
*
* @description
* HTML `SELECT` element with angular data-binding.
*
* # `ngOptions`
*
* Optionally `ngOptions` attribute can be used to dynamically generate a list of `<option>`
* elements for a `<select>` element using an array or an object obtained by evaluating the
* `ngOptions` expression.
*
* When an item in the `<select>` menu is selected, the value of array element or object property
* represented by the selected option will be bound to the model identified by the `ngModel`
* directive of the parent select element.
*
* Optionally, a single hard-coded `<option>` element, with the value set to an empty string, can
* be nested into the `<select>` element. This element will then represent `null` or "not selected"
* option. See example below for demonstration.
*
* Note: `ngOptions` provides iterator facility for `<option>` element which should be used instead
* of {@link ng.directive:ngRepeat ngRepeat} when you want the
* `select` model to be bound to a non-string value. This is because an option element can currently
* be bound to string values only.
*
* @param {string} ngModel Assignable angular expression to data-bind to.
* @param {string=} name Property name of the form under which the control is published.
* @param {string=} required The control is considered valid only if value is entered.
* @param {string=} ngRequired Adds `required` attribute and `required` validation constraint to
* the element when the ngRequired expression evaluates to true. Use `ngRequired` instead of
* `required` when you want to data-bind to the `required` attribute.
* @param {comprehension_expression=} ngOptions in one of the following forms:
*
* * for array data sources:
* * `label` **`for`** `value` **`in`** `array`
* * `select` **`as`** `label` **`for`** `value` **`in`** `array`
* * `label` **`group by`** `group` **`for`** `value` **`in`** `array`
* * `select` **`as`** `label` **`group by`** `group` **`for`** `value` **`in`** `array` **`track by`** `trackexpr`
* * for object data sources:
* * `label` **`for (`**`key` **`,`** `value`**`) in`** `object`
* * `select` **`as`** `label` **`for (`**`key` **`,`** `value`**`) in`** `object`
* * `label` **`group by`** `group` **`for (`**`key`**`,`** `value`**`) in`** `object`
* * `select` **`as`** `label` **`group by`** `group`
* **`for` `(`**`key`**`,`** `value`**`) in`** `object`
*
* Where:
*
* * `array` / `object`: an expression which evaluates to an array / object to iterate over.
* * `value`: local variable which will refer to each item in the `array` or each property value
* of `object` during iteration.
* * `key`: local variable which will refer to a property name in `object` during iteration.
* * `label`: The result of this expression will be the label for `<option>` element. The
* `expression` will most likely refer to the `value` variable (e.g. `value.propertyName`).
* * `select`: The result of this expression will be bound to the model of the parent `<select>`
* element. If not specified, `select` expression will default to `value`.
* * `group`: The result of this expression will be used to group options using the `<optgroup>`
* DOM element.
* * `trackexpr`: Used when working with an array of objects. The result of this expression will be
* used to identify the objects in the array. The `trackexpr` will most likely refer to the
* `value` variable (e.g. `value.propertyName`).
*
* @example
<doc:example>
<doc:source>
<script>
function MyCntrl($scope) {
$scope.colors = [
{name:'black', shade:'dark'},
{name:'white', shade:'light'},
{name:'red', shade:'dark'},
{name:'blue', shade:'dark'},
{name:'yellow', shade:'light'}
];
$scope.color = $scope.colors[2]; // red
}
</script>
<div ng-controller="MyCntrl">
<ul>
<li ng-repeat="color in colors">
Name: <input ng-model="color.name">
[<a href ng-click="colors.splice($index, 1)">X</a>]
</li>
<li>
[<a href ng-click="colors.push({})">add</a>]
</li>
</ul>
<hr/>
Color (null not allowed):
<select ng-model="color" ng-options="c.name for c in colors"></select><br>
Color (null allowed):
<span class="nullable">
<select ng-model="color" ng-options="c.name for c in colors">
<option value="">-- chose color --</option>
</select>
</span><br/>
Color grouped by shade:
<select ng-model="color" ng-options="c.name group by c.shade for c in colors">
</select><br/>
Select <a href ng-click="color={name:'not in list'}">bogus</a>.<br>
<hr/>
Currently selected: {{ {selected_color:color} }}
<div style="border:solid 1px black; height:20px"
ng-style="{'background-color':color.name}">
</div>
</div>
</doc:source>
<doc:scenario>
it('should check ng-options', function() {
expect(binding('{selected_color:color}')).toMatch('red');
select('color').option('0');
expect(binding('{selected_color:color}')).toMatch('black');
using('.nullable').select('color').option('');
expect(binding('{selected_color:color}')).toMatch('null');
});
</doc:scenario>
</doc:example>
*/
var ngOptionsDirective = valueFn({ terminal: true });
var selectDirective = ['$compile', '$parse', function($compile, $parse) {
//0000111110000000000022220000000000000000000000333300000000000000444444444444444440000000005555555555555555500000006666666666666666600000000000000007777000000000000000000088888
var NG_OPTIONS_REGEXP = /^\s*(.*?)(?:\s+as\s+(.*?))?(?:\s+group\s+by\s+(.*))?\s+for\s+(?:([\$\w][\$\w\d]*)|(?:\(\s*([\$\w][\$\w\d]*)\s*,\s*([\$\w][\$\w\d]*)\s*\)))\s+in\s+(.*?)(?:\s+track\s+by\s+(.*?))?$/,
nullModelCtrl = {$setViewValue: noop};
return {
restrict: 'E',
require: ['select', '?ngModel'],
controller: ['$element', '$scope', '$attrs', function($element, $scope, $attrs) {
var self = this,
optionsMap = {},
ngModelCtrl = nullModelCtrl,
nullOption,
unknownOption;
self.databound = $attrs.ngModel;
self.init = function(ngModelCtrl_, nullOption_, unknownOption_) {
ngModelCtrl = ngModelCtrl_;
nullOption = nullOption_;
unknownOption = unknownOption_;
}
self.addOption = function(value) {
optionsMap[value] = true;
if (ngModelCtrl.$viewValue == value) {
$element.val(value);
if (unknownOption.parent()) unknownOption.remove();
}
};
self.removeOption = function(value) {
if (this.hasOption(value)) {
delete optionsMap[value];
if (ngModelCtrl.$viewValue == value) {
this.renderUnknownOption(value);
}
}
};
self.renderUnknownOption = function(val) {
var unknownVal = '? ' + hashKey(val) + ' ?';
unknownOption.val(unknownVal);
$element.prepend(unknownOption);
$element.val(unknownVal);
unknownOption.prop('selected', true); // needed for IE
}
self.hasOption = function(value) {
return optionsMap.hasOwnProperty(value);
}
$scope.$on('$destroy', function() {
// disable unknown option so that we don't do work when the whole select is being destroyed
self.renderUnknownOption = noop;
});
}],
link: function(scope, element, attr, ctrls) {
// if ngModel is not defined, we don't need to do anything
if (!ctrls[1]) return;
var selectCtrl = ctrls[0],
ngModelCtrl = ctrls[1],
multiple = attr.multiple,
optionsExp = attr.ngOptions,
nullOption = false, // if false, user will not be able to select it (used by ngOptions)
emptyOption,
// we can't just jqLite('<option>') since jqLite is not smart enough
// to create it in <select> and IE barfs otherwise.
optionTemplate = jqLite(document.createElement('option')),
optGroupTemplate =jqLite(document.createElement('optgroup')),
unknownOption = optionTemplate.clone();
// find "null" option
for(var i = 0, children = element.children(), ii = children.length; i < ii; i++) {
if (children[i].value == '') {
emptyOption = nullOption = children.eq(i);
break;
}
}
selectCtrl.init(ngModelCtrl, nullOption, unknownOption);
// required validator
if (multiple && (attr.required || attr.ngRequired)) {
var requiredValidator = function(value) {
ngModelCtrl.$setValidity('required', !attr.required || (value && value.length));
return value;
};
ngModelCtrl.$parsers.push(requiredValidator);
ngModelCtrl.$formatters.unshift(requiredValidator);
attr.$observe('required', function() {
requiredValidator(ngModelCtrl.$viewValue);
});
}
if (optionsExp) Options(scope, element, ngModelCtrl);
else if (multiple) Multiple(scope, element, ngModelCtrl);
else Single(scope, element, ngModelCtrl, selectCtrl);
////////////////////////////
function Single(scope, selectElement, ngModelCtrl, selectCtrl) {
ngModelCtrl.$render = function() {
var viewValue = ngModelCtrl.$viewValue;
if (selectCtrl.hasOption(viewValue)) {
if (unknownOption.parent()) unknownOption.remove();
selectElement.val(viewValue);
if (viewValue === '') emptyOption.prop('selected', true); // to make IE9 happy
} else {
if (isUndefined(viewValue) && emptyOption) {
selectElement.val('');
} else {
selectCtrl.renderUnknownOption(viewValue);
}
}
};
selectElement.on('change', function() {
scope.$apply(function() {
if (unknownOption.parent()) unknownOption.remove();
ngModelCtrl.$setViewValue(selectElement.val());
});
});
}
function Multiple(scope, selectElement, ctrl) {
var lastView;
ctrl.$render = function() {
var items = new HashMap(ctrl.$viewValue);
forEach(selectElement.find('option'), function(option) {
option.selected = isDefined(items.get(option.value));
});
};
// we have to do it on each watch since ngModel watches reference, but
// we need to work of an array, so we need to see if anything was inserted/removed
scope.$watch(function selectMultipleWatch() {
if (!equals(lastView, ctrl.$viewValue)) {
lastView = copy(ctrl.$viewValue);
ctrl.$render();
}
});
selectElement.on('change', function() {
scope.$apply(function() {
var array = [];
forEach(selectElement.find('option'), function(option) {
if (option.selected) {
array.push(option.value);
}
});
ctrl.$setViewValue(array);
});
});
}
function Options(scope, selectElement, ctrl) {
var match;
if (! (match = optionsExp.match(NG_OPTIONS_REGEXP))) {
throw minErr('ngOptions')('iexp',
"Expected expression in form of '_select_ (as _label_)? for (_key_,)?_value_ in _collection_' but got '{0}'. Element: {1}",
optionsExp, startingTag(selectElement));
}
var displayFn = $parse(match[2] || match[1]),
valueName = match[4] || match[6],
keyName = match[5],
groupByFn = $parse(match[3] || ''),
valueFn = $parse(match[2] ? match[1] : valueName),
valuesFn = $parse(match[7]),
track = match[8],
trackFn = track ? $parse(match[8]) : null,
// This is an array of array of existing option groups in DOM. We try to reuse these if possible
// optionGroupsCache[0] is the options with no option group
// optionGroupsCache[?][0] is the parent: either the SELECT or OPTGROUP element
optionGroupsCache = [[{element: selectElement, label:''}]];
if (nullOption) {
// compile the element since there might be bindings in it
$compile(nullOption)(scope);
// remove the class, which is added automatically because we recompile the element and it
// becomes the compilation root
nullOption.removeClass('ng-scope');
// we need to remove it before calling selectElement.html('') because otherwise IE will
// remove the label from the element. wtf?
nullOption.remove();
}
// clear contents, we'll add what's needed based on the model
selectElement.html('');
selectElement.on('change', function() {
scope.$apply(function() {
var optionGroup,
collection = valuesFn(scope) || [],
locals = {},
key, value, optionElement, index, groupIndex, length, groupLength;
if (multiple) {
value = [];
for (groupIndex = 0, groupLength = optionGroupsCache.length;
groupIndex < groupLength;
groupIndex++) {
// list of options for that group. (first item has the parent)
optionGroup = optionGroupsCache[groupIndex];
for(index = 1, length = optionGroup.length; index < length; index++) {
if ((optionElement = optionGroup[index].element)[0].selected) {
key = optionElement.val();
if (keyName) locals[keyName] = key;
if (trackFn) {
for (var trackIndex = 0; trackIndex < collection.length; trackIndex++) {
locals[valueName] = collection[trackIndex];
if (trackFn(scope, locals) == key) break;
}
} else {
locals[valueName] = collection[key];
}
value.push(valueFn(scope, locals));
}
}
}
} else {
key = selectElement.val();
if (key == '?') {
value = undefined;
} else if (key == ''){
value = null;
} else {
if (trackFn) {
for (var trackIndex = 0; trackIndex < collection.length; trackIndex++) {
locals[valueName] = collection[trackIndex];
if (trackFn(scope, locals) == key) {
value = valueFn(scope, locals);
break;
}
}
} else {
locals[valueName] = collection[key];
if (keyName) locals[keyName] = key;
value = valueFn(scope, locals);
}
}
}
ctrl.$setViewValue(value);
});
});
ctrl.$render = render;
// TODO(vojta): can't we optimize this ?
scope.$watch(render);
function render() {
var optionGroups = {'':[]}, // Temporary location for the option groups before we render them
optionGroupNames = [''],
optionGroupName,
optionGroup,
option,
existingParent, existingOptions, existingOption,
modelValue = ctrl.$modelValue,
values = valuesFn(scope) || [],
keys = keyName ? sortedKeys(values) : values,
groupLength, length,
groupIndex, index,
locals = {},
selected,
selectedSet = false, // nothing is selected yet
lastElement,
element,
label;
if (multiple) {
if (trackFn && isArray(modelValue)) {
selectedSet = new HashMap([]);
for (var trackIndex = 0; trackIndex < modelValue.length; trackIndex++) {
locals[valueName] = modelValue[trackIndex];
selectedSet.put(trackFn(scope, locals), modelValue[trackIndex]);
}
} else {
selectedSet = new HashMap(modelValue);
}
}
// We now build up the list of options we need (we merge later)
for (index = 0; length = keys.length, index < length; index++) {
locals[valueName] = values[keyName ? locals[keyName]=keys[index]:index];
optionGroupName = groupByFn(scope, locals) || '';
if (!(optionGroup = optionGroups[optionGroupName])) {
optionGroup = optionGroups[optionGroupName] = [];
optionGroupNames.push(optionGroupName);
}
if (multiple) {
selected = selectedSet.remove(trackFn ? trackFn(scope, locals) : valueFn(scope, locals)) != undefined;
} else {
if (trackFn) {
var modelCast = {};
modelCast[valueName] = modelValue;
selected = trackFn(scope, modelCast) === trackFn(scope, locals);
} else {
selected = modelValue === valueFn(scope, locals);
}
selectedSet = selectedSet || selected; // see if at least one item is selected
}
label = displayFn(scope, locals); // what will be seen by the user
label = label === undefined ? '' : label; // doing displayFn(scope, locals) || '' overwrites zero values
optionGroup.push({
id: trackFn ? trackFn(scope, locals) : (keyName ? keys[index] : index), // either the index into array or key from object
label: label,
selected: selected // determine if we should be selected
});
}
if (!multiple) {
if (nullOption || modelValue === null) {
// insert null option if we have a placeholder, or the model is null
optionGroups[''].unshift({id:'', label:'', selected:!selectedSet});
} else if (!selectedSet) {
// option could not be found, we have to insert the undefined item
optionGroups[''].unshift({id:'?', label:'', selected:true});
}
}
// Now we need to update the list of DOM nodes to match the optionGroups we computed above
for (groupIndex = 0, groupLength = optionGroupNames.length;
groupIndex < groupLength;
groupIndex++) {
// current option group name or '' if no group
optionGroupName = optionGroupNames[groupIndex];
// list of options for that group. (first item has the parent)
optionGroup = optionGroups[optionGroupName];
if (optionGroupsCache.length <= groupIndex) {
// we need to grow the optionGroups
existingParent = {
element: optGroupTemplate.clone().attr('label', optionGroupName),
label: optionGroup.label
};
existingOptions = [existingParent];
optionGroupsCache.push(existingOptions);
selectElement.append(existingParent.element);
} else {
existingOptions = optionGroupsCache[groupIndex];
existingParent = existingOptions[0]; // either SELECT (no group) or OPTGROUP element
// update the OPTGROUP label if not the same.
if (existingParent.label != optionGroupName) {
existingParent.element.attr('label', existingParent.label = optionGroupName);
}
}
lastElement = null; // start at the beginning
for(index = 0, length = optionGroup.length; index < length; index++) {
option = optionGroup[index];
if ((existingOption = existingOptions[index+1])) {
// reuse elements
lastElement = existingOption.element;
if (existingOption.label !== option.label) {
lastElement.text(existingOption.label = option.label);
}
if (existingOption.id !== option.id) {
lastElement.val(existingOption.id = option.id);
}
// lastElement.prop('selected') provided by jQuery has side-effects
if (lastElement[0].selected !== option.selected) {
lastElement.prop('selected', (existingOption.selected = option.selected));
}
} else {
// grow elements
// if it's a null option
if (option.id === '' && nullOption) {
// put back the pre-compiled element
element = nullOption;
} else {
// jQuery(v1.4.2) Bug: We should be able to chain the method calls, but
// in this version of jQuery on some browser the .text() returns a string
// rather then the element.
(element = optionTemplate.clone())
.val(option.id)
.attr('selected', option.selected)
.text(option.label);
}
existingOptions.push(existingOption = {
element: element,
label: option.label,
id: option.id,
selected: option.selected
});
if (lastElement) {
lastElement.after(element);
} else {
existingParent.element.append(element);
}
lastElement = element;
}
}
// remove any excessive OPTIONs in a group
index++; // increment since the existingOptions[0] is parent element not OPTION
while(existingOptions.length > index) {
existingOptions.pop().element.remove();
}
}
// remove any excessive OPTGROUPs from select
while(optionGroupsCache.length > groupIndex) {
optionGroupsCache.pop()[0].element.remove();
}
}
}
}
}
}];
var optionDirective = ['$interpolate', function($interpolate) {
var nullSelectCtrl = {
addOption: noop,
removeOption: noop
};
return {
restrict: 'E',
priority: 100,
compile: function(element, attr) {
if (isUndefined(attr.value)) {
var interpolateFn = $interpolate(element.text(), true);
if (!interpolateFn) {
attr.$set('value', element.text());
}
}
return function (scope, element, attr) {
var selectCtrlName = '$selectController',
parent = element.parent(),
selectCtrl = parent.data(selectCtrlName) ||
parent.parent().data(selectCtrlName); // in case we are in optgroup
if (selectCtrl && selectCtrl.databound) {
// For some reason Opera defaults to true and if not overridden this messes up the repeater.
// We don't want the view to drive the initialization of the model anyway.
element.prop('selected', false);
} else {
selectCtrl = nullSelectCtrl;
}
if (interpolateFn) {
scope.$watch(interpolateFn, function interpolateWatchAction(newVal, oldVal) {
attr.$set('value', newVal);
if (newVal !== oldVal) selectCtrl.removeOption(oldVal);
selectCtrl.addOption(newVal);
});
} else {
selectCtrl.addOption(attr.value);
}
element.on('$destroy', function() {
selectCtrl.removeOption(attr.value);
});
};
}
}
}];
var styleDirective = valueFn({
restrict: 'E',
terminal: true
});
//try to bind to jquery now so that one can write angular.element().read()
//but we will rebind on bootstrap again.
bindJQuery();
publishExternalAPI(angular);
jqLite(document).ready(function() {
angularInit(document, bootstrap);
});
})(window, document);
angular.element(document).find('head').prepend('<style type="text/css">@charset "UTF-8";[ng\\:cloak],[ng-cloak],[data-ng-cloak],[x-ng-cloak],.ng-cloak,.x-ng-cloak,.ng-hide{display:none !important;}ng\\:form{display:block;}</style>');