Felisp
84436a5ae0
http://my.svgalib.org/svgalib/svgalib-1.9.25.tar.gz http://my.svgalib.org/svgalib/
96 lines
2.9 KiB
Groff
96 lines
2.9 KiB
Groff
.TH testlinear 6 "29 July 1997" "Svgalib (>= 1.2.11)" "Svgalib User Manual"
|
|
.SH NAME
|
|
testlinear, lineart \- test a linear frame buffer
|
|
.SH SYNOPSIS
|
|
|
|
.B testlinear
|
|
|
|
.SH DESCRIPTION
|
|
Program to test linear addressing on Cirrus cards and on Mach32 (and other cards which
|
|
may support it).
|
|
|
|
Selects 640x480x256 and tries to enable a linear frame buffer
|
|
(its virtual address is printed). Fills the screen in some color,
|
|
then draws pixels in random positions.
|
|
|
|
For Cirrus cards some
|
|
direct hardware access is then made for highspeed screen access.
|
|
Except for the last (Cirrus only) test no speeds are printed, but
|
|
you are welcome to use 'time' to measure it. The program draws
|
|
714400 one byte pixels plus a forced 1s delay and various rand()
|
|
calls for the pixels.
|
|
|
|
The
|
|
.B testlinear
|
|
demo needs a few presses of
|
|
.B <Return>
|
|
after each
|
|
minimal demo step. Even when it does not prompt for it. When it
|
|
appears to be stuck, just press
|
|
.BR <Return> .
|
|
|
|
The
|
|
.B lineart
|
|
demo is the same, but it accepts a command line with an arbitrary
|
|
number of modes. The modes may be either mode numbers or names, or
|
|
both. For example,
|
|
|
|
.I lineart 11 17 "G800x600x32k" 22
|
|
|
|
will give a display of mode 11. If a key is pressed mode 17 will
|
|
appear, followed by mode 20 and 22 as succesive keys are pressed.
|
|
|
|
This demo is part of svgalib and can be found in the
|
|
.I demos/
|
|
subdirectory of the original svgalib distribution. However, it is not installed in the system
|
|
by default, s.t. it is unclear where you can find it if your svgalib was installed by some
|
|
linux distribution. Even then, when you have the demo on your system, you probably won't have
|
|
the sources s.t. it is only of limited use for you.
|
|
|
|
In case of any such problem, simply get an svgalib distribution from the net. You even
|
|
don't need to install it. Just
|
|
.B make
|
|
in the
|
|
.I demos/
|
|
subdirecty. As of this writing,
|
|
.I svgalib-1.2.12.tar.gz
|
|
is the latest version and can be retrieved by ftp from
|
|
.IR "sunsite.unc.edu" " at " "/pub/Linux/libs/graphics"
|
|
and
|
|
.IR "tsx-11.mit.edu" " at " "/pub/linux/sources/libs"
|
|
which will most probably be mirrored by a site close to you.
|
|
|
|
.SH SEE ALSO
|
|
|
|
.BR svgalib (7),
|
|
.BR vgagl (7),
|
|
.BR libvga.config (5),
|
|
.BR threed (6),
|
|
.BR accel (6),
|
|
.BR bg_test (6),
|
|
.BR eventtest (6),
|
|
.BR forktest (6),
|
|
.BR fun (6),
|
|
.BR keytest (6),
|
|
.BR mousetest (6),
|
|
.BR scrolltest (6),
|
|
.BR speedtest (6),
|
|
.BR spin (6),
|
|
.BR testaccel (6),
|
|
.BR testgl (6),
|
|
.BR vgatest (6),
|
|
.BR plane (6),
|
|
.BR wrapdemo (6)
|
|
|
|
.SH AUTHOR
|
|
|
|
This manual page was edited by Michael Weller <eowmob@exp-math.uni-essen.de>. The
|
|
exact source of the referenced demo as well as of the original documentation is
|
|
unknown.
|
|
|
|
It is very likely that both are at least to some extent are due to
|
|
Harm Hanemaayer <H.Hanemaayer@inter.nl.net>.
|
|
|
|
Occasionally this might be wrong. I hereby
|
|
asked to be excused by the original author and will happily accept any additions or corrections
|
|
to this first version of the svgalib manual.
|