Felisp
84436a5ae0
http://my.svgalib.org/svgalib/svgalib-1.9.25.tar.gz http://my.svgalib.org/svgalib/
88 lines
3.1 KiB
Text
88 lines
3.1 KiB
Text
multi-monitor support is still very experimental, and not
|
|
very easy to setup. Here's a copy of a message I sent to
|
|
the mailing list:
|
|
|
|
|
|
First: only nvidia, 3dfx, sis and i740 cards can be secondary cards,
|
|
(though the primary can be anything, including vesa).
|
|
Second: as far as I can understand, once both cards are enabled, there
|
|
ought to be a resource contention (in hardware) between the cards for
|
|
the vga regions (IO 0x3c0-0x3df and MEM 0xa0000-0xbffff). I don't know
|
|
how it is supposed to be solved, but in practice, if I ignore it in my
|
|
system, it just works.
|
|
|
|
If anybody else has successfully run svgalib on a secondary card, please
|
|
tell me, and if you had to do something different from what I did, a
|
|
detailed report to the list might help others.
|
|
|
|
Here's my setup:
|
|
|
|
I have two vga cards: AGP (1:0.0) nVidia TNT2 and (PCI0:0f.0) Riva128.
|
|
The AGP card is the primary (in the BIOS option "initialize AGP card
|
|
first" is selected). My boot sequence includes the following code to
|
|
initialize the secondary card:
|
|
|
|
/usr/local/sbin/vbios.x86emu
|
|
/usr/local/sbin/vga_reset
|
|
/sbin/setpci -s 00:0f.0 COMMAND=2
|
|
|
|
the vbios.x86emu is the same as distributed in x86emu-0.6 (from ftp.scitechsoft.com)
|
|
except that in debug.h the line
|
|
#define CONFIG_ACTIVE_DEVICE 1
|
|
is replaced by
|
|
#define CONFIG_ACTIVE_DEVICE 0
|
|
(so that the active device is not initialized by x86emu).
|
|
|
|
the setpci line enables memory access (of the drivers supporting
|
|
secondary card, nv3 and i740 use only memory mapped IO, sis and banshee
|
|
need I/O access as well, so you need COMMAND=3). The COMMAND register
|
|
might have other bits set, so you might try to see its value first, and
|
|
then set the 0,1 bits.
|
|
|
|
I have two config files in /etc/vga:
|
|
libvga.config.0 - for the scondary card:
|
|
|
|
novccontrol
|
|
secondary
|
|
include /etc/vga/libvga.config.common
|
|
HorizSync 30 54
|
|
VertRefresh 40 120
|
|
|
|
The novccontrol and secondary options are necessary for a secondary
|
|
card. The include statement is for a card with common configurations -
|
|
mouse, keyboard, etc.
|
|
|
|
libvga.config.1 - for the primary:
|
|
|
|
PCIStart 1 0
|
|
include /etc/vga/libvga.config.common
|
|
HorizSync 30 115
|
|
VertRefresh 40 160
|
|
|
|
The pcistart option is necessary to make sure that svgalib skips the
|
|
first card (in PCI order), and so finds the AGP card.
|
|
|
|
to run a program on the primary card, in the usual way, I do
|
|
|
|
export SVGALIB_CARD=1
|
|
/svgalib/demos/vgatest
|
|
|
|
to run a program on the secondary card:
|
|
|
|
export SVGALIB_CARD=0
|
|
/svgalib/demos/vgatest
|
|
|
|
There are a few differences for a program running on secondary card:
|
|
|
|
- The program is not aware of VC switches, so you can switch to another
|
|
console, and the program will still run (and display).
|
|
- The program can't event system (mouse or raw keyboard).
|
|
- Standard VGA modes and paged memory modes might have problems.
|
|
|
|
What this limitations mean is that usual svgalib program might not be
|
|
useful for a secondary card. I use the secondary display for
|
|
watching TV, movies and slideshows. Eye candy programs (such as
|
|
synaesthesia) might also work, after a few changes, but interactive
|
|
programs (zgv, games) are unusable right now. I intend to add support
|
|
for Vojtech Pavlik's input event system to svgalib-2.0, so that
|
|
interactive program will be usable as well.
|