* exwm-layout.el (exwm-layout--show): Always set an X window in
fullscreen mode the size in fullscreen.
(exwm-layout-unset-fullscreen): Leave the fullscreen mode first.
* exwm-layout.el (exwm-layout--fullscreen-p): New function telling
whether the current buffer is in fullscreen mode.
(exwm-layout-set-fullscreen, exwm-layout-unset-fullscreen)
(exwm-layout-toggle-fullscreen):
* exwm-manage.el (exwm-manage--manage-window)
(exwm-manage--on-ConfigureRequest):
* exwm-workspace.el (exwm-workspace-switch, exwm-workspace-swap)
(exwm-workspace-move):
* exwm.el (exwm-reset, exwm--on-ClientMessage): Use it.
* exwm-workspace.el (exwm-workspace--set-active): New function for
setting the 'exwm-active' frame parameter and show/hide frames BTW.
(exwm-workspace--active-p): New function checking whether a frame is
active.
(exwm-workspace--set-fullscreen, exwm-workspace-switch)
(exwm-workspace-move-window):
* exwm-randr.el (exwm-randr--refresh): Use them.
* exwm-workspace.el (exwm-workspace-attach-minibuffer)
(exwm-workspace--show-minibuffer, exwm-workspace--hide-minibuffer):
Show/Hide the minibuffer frame.
* exwm-randr.el (exwm-randr--refresh): Mark active workspaces.
* exwm-workspace.el (exwm-workspace-switch): Use the marks to
show/hide X windows when switching workspace; do not update timestamp.
(exwm-workspace-move-window): Use the marks to hide X windows after
moving them.
(exwm-workspace--init): Update `frameset-filter-alist'.
* exwm-randr.el (exwm-randr--refresh): Always set the name of primary
output.
* exwm-workspace.el (exwm-workspace-switch)
(exwm-workspace-move-window): Use 'exwm-randr-output' frame parameter
to check if two frames are on the same output.
* exwm-workspace.el (exwm-workspace-switch): Do not hide X windows
when switching to a workspace on another output; update the
timestamp (last switched to) of a workspace frame.
(exwm-workspace-move-window): Do not hide an X window when moving it
to an active workspace on another output.
* exwm-floating.el (exwm-floating--set-floating):
* exwm-layout.el (exwm-layout-set-fullscreen):
* exwm-manage.el (exwm-manage--manage-window)
(exwm-manage--on-ConfigureRequest):
* exwm-systemtray.el (exwm-systemtray--refresh)
(exwm-systemtray--init):
Correct coordinate calculations.
* exwm-workspace.el (exwm-workspace--current-width): Removed since no
longer used.
; Setting _NET_WM_DESKTOP to 0xffffffff makes an X windows appearing
; on all desktops (EWMH). It's tricky to do it for tiling X windows
; so it's not implemented.
* exwm-core.el (exwm--desktop): New buffer-local variable recording
the value of _NET_WM_DESKTOP.
* exwm-layout.el (exwm-layout--hide): Do not hide X windows with this
property set to 0xffffffff.
* exwm.el (exwm--update-desktop): New function for fetching the value
of _NET_WM_DESKTOP and setting `exwm--desktop'.
* exwm-manage.el (exwm-manage--manage-window): Use it.
* exwm-workspace.el (exwm-workspace--set-desktop): Also update
`exwm--desktop'.
; This is an attempt to make (managed) X windows container-less, i.e. direct children of the root window. This is mainly to make EXWM compatible with third-party compositors. Other issues like wrong absolute position should also get resolved by the way. The workspace containers ("virtual roots") are also removed. However Emacs frames are still wrapped in containers to avoid unexpected stack reordering.
* exwm-cm.el: Make this module obsolete as EXWM supports third-party compositors now.
* exwm-core.el (exwm--container):
* exwm-floating.el (exwm-floating--set-floating)
(exwm-floating--unset-floating, exwm-floating-hide)
(exwm-floating--start-moveresize, exwm-floating--stop-moveresize)
(exwm-floating--do-moveresize, exwm-floating-move):
* exwm-input.el (exwm-input--update-focus):
* exwm-layout.el (exwm-layout--show, exwm-layout--hide)
(exwm-layout-set-fullscreen, exwm-layout-unset-fullscreen):
* exwm-manage.el (exwm-manage--manage-window, exwm-manage--unmanage-window)
(exwm-manage--kill-buffer-query-function, exwm-manage--kill-client):
* exwm-workspace.el (exwm-workspace--set-fullscreen, exwm-workspace-switch)
(exwm-workspace-move-window, exwm-workspace--add-frame-as-workspace)
(exwm-workspace--remove-frame-as-workspace): Make adaptions for container-less X windows.
* exwm-workspace.el (exwm-workspace--update-ewmh-props):
* exwm.el (exwm--init-icccm-ewmh, exwm--exit-icccm-ewmh): No longer use virtual roots.
* exwm-input.el (exwm-input--on-workspace-list-change)
(exwm-input--update-global-prefix-keys, exwm-input--init, exwm-input--exit): From now on global key bindings are grabbed on the root window so it's no long required to re-grab them each time the workspace list changes. As a result `exwm-input--on-workspace-list-change' and its corresponding references are discarded. It remains to be seen if this change will raise input focus issues.
* exwm-manage.el (exwm-manage--manage-window): Explicitly set the workspace for newly managed X windows.
* exwm-floating.el (exwm-floating--set-floating): Avoid implicit reference to the current workspace.
* exwm-core.el (exwm--set-geometry): New function for setting the geometry of an X window.
* exwm-layout.el (exwm-layout--resize-container): Replaced by `exwm-layout--resize-container'.
* exwm-core.el (exwm--guide-window): New global variable recording the guide X window.
* exwm.el (exwm--init-icccm-ewmh): Set it.
* exwm-input.el (exwm-input--post-init): New function containing staffs for initialization but should better get called after the event loop starts.
* exwm.el (exwm-init): Use it.
* exwm-input.el (exwm-input--on-buffer-list-update): Cancel the frame
redirection introduced by 421c0512f7.
* exwm-input.el (exwm-input--on-buffer-list-update): Only ignore temp
buffers just switched from.
* exwm-input.el (exwm-input--update-focus-commit): New function for
ensuring the input focus lock can always be released.
(exwm-input--update-focus-defer, exwm-input--update-focus): Use it.
* exwm-input.el (exwm-input--update-focus): No need to select frames;
only transfer X input focus.
* exwm-core.el (exwm--defer): New macro for correcting the use of
`run-with-idle-timer' by taking `current-idle-time' into account.
* exwm-input.el (exwm-input--update-focus-defer)
(exwm-input--update-focus):
* exwm-layout.el (exwm-layout--on-minibuffer-setup)
(exwm-layout--on-echo-area-change):
* exwm-manage.el (exwm-manage--unmanage-window)
(exwm-workspace--prompt-delete):
* exwm-workspace.el (exwm-workspace-switch)
(exwm-workspace--add-frame-as-workspace):
Use it.
* exwm-workspace--add-frame-as-workspace
(exwm-workspace--add-frame-as-workspace): Manually compare X display
names as there's no built-in function handles this correctly.
* exwm-workspace.el (exwm-workspace--add-frame-as-workspace): An X
display name set by XELB can be different from (but equivalent with)
the one set by Emacs.
; Since X windows are managed by EXWM, the current Emacs frame should
always be considered focused logically.
* exwm-workspace.el (exwm-workspace-switch): Manually run
`focus-in-hook' and `focus-out-hook'.
(exwm-workspace--handle-focus-in, exwm-workspace--handle-focus-out):
New functions for overriding `handle-focus-in' and `handle-focus-out'.
(exwm-workspace--init, exwm-workspace--exit): Override
`handle-focus-in' and `handle-focus-out'
* exwm-workspace.el (exwm-workspace--update-workareas-hook): New hook
run when workareas get updated.
(exwm-workspace--update-workareas): Run the hook.
* exwm-systemtray.el (exwm-systemtray--on-workspace-switch)
(exwm-systemtray--on-randr-refresh): Take struts into account when
calculating the position for systemtray.
(exwm-systemtray--on-struts-update): Alias of
`exwm-systemtray--on-randr-refresh'.
(exwm-systemtray--init, exwm-systemtray--exit): Manipulate
`exwm-workspace--update-workareas-hook'.
* exwm-input.el (exwm-input--init):
* exwm-randr.el (exwm-randr--init):
* exwm-workspace.el (exwm-workspace--init):
Add certain frame parameters into `frameset-filter-alist' to prevent
them from being saved/restored which makes little sense and is
problematic.
; This commit replaces the internal borders of Emacs frames with X
; window borders. This should make the flickering issue of floating X
; windows less serious.
* exwm-floating.el (exwm-floating--border-pixel)
(exwm-floating--border-colormap): New variables for storing border pixel
and its colormap.
(exwm-floating--set-floating): Do not set the internal border (and
background color) of floating frames; do not take
`exwm-floating-border-width' into account when calculating geometries;
set the border of floating X window containers.
(exwm-floating--unset-floating): No need to restore the position of X
windows any more; hide the border of floating X window containers.
(exwm-floating--init): Initialize the border pixel.
* exwm-layout.el (exwm-layout-set-fullscreen)
(exwm-layout-unset-fullscreen): Show/Hide container border respectively.
* exwm-manage.el (exwm-manage--manage-window): Set the border pixel and
colormap of X window containers.
* exwm-workspace.el (exwm-workspace-move-window): Do not set the
internal border and background color of floating frames.
* exwm.el (exwm--on-ClientMessage): Simplify the code for calculating
_NET_REQUEST_FRAME_EXTENTS.
* exwm-floating.el (exwm-floating--set-floating):
* exwm-workspace.el (exwm-workspace-move-window):
Buffers visible on other frames should be treated as invisible. One
side effect is visible buffers on the current frame is also taken into
account.
This is a small change that improves the behavior of
`exwm-workspace-move-window` in the following situation:
0. `exwm-workspace-show-all-buffers` and `exwm-layout-show-all-buffers`
are `nil`*.
1. On active workspace `i`, there is X window `a` in the selected Emacs
window.
2. On workspace `j`, there is X window `b` in the selected Emacs window
on that workspace frame.
3. While workspace `i` is active, use `exwm-workspace-move-window` to
move `a` to workspace `j`.
4. Switch to workspace `j` and use `exwm-workspace-move-window` to move
`a` back to workspace `i`.
Expected behavior: X window `a` is once again shown in the selected
Emacs window on workspace `i` and X window `b` is once again shown in
the selected Emacs window on workspace `j`.
What is observed: `a` is OK but the selected Emacs window on workspace
`j` does not show `b`. However, `b` is the first candidate when doing a
`switch-to-buffer` in that Emacs window on workspace `j`.
I'm not sure if this is the correct and complete change required, but it
is working well so far.
*The expected behavior is observed with EXWM 0.10 if
exwm-{workspace,layout}-show-all-buffers are non-nil.
* exwm-workspace.el (exwm-workspace--update-workareas): Do not set
_NET_WORKAREA.
* exwm.el (exwm--init-icccm-ewmh, exwm--exit-icccm-ewmh): Remove
_NET_WORKAREA from the supported list.
* exwm-workspace.el (exwm-workspace--update-ewmh-props):
* exwm.el (exwm--init-icccm-ewmh):
Set _NET_DESKTOP_VIEWPORT on startup since it's a constant.
* exwm.el (exwm--update-struts-legacy, exwm--update-struts-partial):
Always set the struts value, even it's nil.
* exwm-workspace.el (exwm-workspace--update-struts): Check for nil
struts values.
* exwm-core.el (exwm--fullscreen): Removed.
(exwm--ewmh-state): New variable for recording the _NET_WM_STATE hint.
* exwm-core.el (exwm-mode-menu, exwm-mode-map):
* exwm-layout.el (exwm-layout-set-fullscreen)
(exwm-layout-unset-fullscreen):
* exwm-manage.el (exwm-manage--unmanage-window)
(exwm-manage--on-ConfigureRequest):
* exwm-workspace.el (exwm-workspace-switch, exwm-workspace-swap)
(exwm-workspace-move):
* exwm.el (exwm-reset, exwm--on-ClientMessage):
Use the new variable.
* exwm-manage.el (exwm-manage--update-ewmh-state): New function for
updating _NET_WM_STATE.
(exwm-manage--manage-window): Update _NET_WM_STATE and check for
_NET_WM_STATE_FULLSCREEN.
* exwm-manage.el (exwm-manage--desktop): New variable for recording the
desktop X window.
(exwm-manage--manage-window): Check for desktop.
* exwm-workspace.el (exwm-workspace--resize-minibuffer-frame)
(exwm-workspace--hide-minibuffer): Put the minibuffer container above
desktop if any.
; Also fix various compile warnings.
* exwm-floating.el (exwm-floating--set-floating):
* exwm-manage.el (exwm-manage--manage-window):
* exwm-systemtray.el (exwm-systemtray--init):
* exwm-workspace.el (exwm-workspace--add-frame-as-workspace)
(exwm-workspace--init):
* exwm.el (exwm--init-icccm-ewmh):
Explicitly specify the class (InputOutput or InputOnly) and for an
InputOutput X window the background pixmap when creating an X window.
* exwm-input.el (exwm-input--timestamp-window)
(exwm-input--timestamp-atom, exwm-input--timestamp-callback): New
variables for updating timestamp.
(exwm-input--set-focus): Send WM_TAKE_FOCUS ClientMessage with updated
timestamp.
(exwm-input--update-timestamp): New utility function for fetching
timestamp.
(exwm-input--on-PropertyNotify): New function for handling
PropertyNotify event to extract the timestamp.
(exwm-input--init): Create resources for updating timestamp; attach the
event listener.
(exwm-input--on-ButtonPress, exwm-input--on-KeyPress):
* exwm.el (exwm--on-PropertyNotify): No longer update timestamp.
* exwm-input.el (exwm-input--set-focus): Avoid setting input focus on
already focused X windows, or when the input focus in not on a Emacs
frame if globally active model is in use.
* exwm-floating.el (exwm-floating--set-floating):
* exwm-workspace.el (exwm-workspace-move-window)
(exwm-workspace--add-frame-as-workspace, exwm-workspace--init):
Set 'exwm-id' frame parameter as the numerical (inner) frame X ID.
* exwm-workspace.el (exwm-workspace--confirm-kill-emacs):
* exwm.el (exwm-restart): Run `kill-emacs-hook' early; do not check for
X windows before restarting.
* exwm-input.el (exwm-input--exit): Cancel timers.
* exwm-manage.el (exwm-manage--manage-window): Add reparented X windows
to save-set.
* exwm-systemtray.el (exwm-systemtray--embed): Add embeded icons to
save-set.
* exwm-workspace.el (exwm-workspace--confirm-kill-emacs): No need to
unmanage; also hide Emacs frames; always call `exwm--exit'.
* exwm.el (exwm-restart): New command for restarting EXWM.
(exwm--exit-icccm-ewmh): New function for cleaning up ICCCM/EWMH
properties.
(exwm-exit-hook): Update doc string.
(exwm--exit): Call `exwm--exit-icccm-ewmh' and do not reset variables.
* exwm-workspace.el (exwm-workspace--on-minibuffer-setup): Work around
the *Completions* buffer not getting fitted problem.
* exwm.el (exwm-enable): Enable `window-resize-pixelwise'.
* exwm-input.el (exwm-input--set-focus): Make input focus revert to
parent by default (to prevent input focus from following pointer).
* exwm-input.el (exwm-input--update-focus): Switch to another workspace
if input focus is transfered to it.
* exwm-workspace.el (exwm-workspace--on-focus-in, exwm-workspace--init)
(exwm-workspace--exit): Remove `exwm-workspace--on-focus-in' and related
uses.
* exwm-input.el (exwm-input--on-minibuffer-setup): New function for
setting input focus on the workspace frame.
(exwm-input--init): Add the function to `minibuffer-setup-hook'.
* exwm-workspace.el (exwm-workspace--on-minibuffer-setup): Avoid setting
input focus here.
* exwm-input.el (exwm-input--unread-event): Temporarily disable it
due to bug#23980.
* exwm-workspace.el (exwm-workspace--init): Set the default frame
internal border to 0.
* exwm-workspace.el (exwm-workspace--remove-frame-as-workspace):
Fix a typo.
* exwm-workspace.el (exwm-workspace-delete): Prevent deleting the last
workspace.
* exwm-workspace.el (exwm-workspace--remove-frame-as-workspace): Create
a new workspace if the last one is deleted.
* exwm-workspace.el (exwm-workspace--add-frame-as-workspace): Do not run
`exwm-workspace-list-change-hook' when create workspace in the background.
(exwm-workspace-switch-create): Run the hook once.
(exwm-workspace--prompt-add): Run the hook.
* exwm-input.el (exwm-input--update-focus-window)
(exwm-input--on-buffer-list-update, exwm-input--update-focus-interval)
(exwm-input--update-focus-lock, exwm-input--update-focus-defer-timer)
(exwm-input--update-focus-timer, exwm-input--update-focus-defer)
(defun exwm-input--update-focus): Rework the input focus update
mechanism, mainly to overcome the input focus update contention.
* exwm-input.el (defun exwm-input--update-focus): Use `select-window'
instead of `exwm-workspace-switch'; calling the latter is too expensive.
* exwm-layout.el (exwm-layout--on-minibuffer-setup): Drop a unnecessary
line.
* exwm-workspace.el (exwm-workspace-switch): Set input focus to the new
workspace frame.
* exwm-workspace.el (exwm-workspace-switch)
(exwm-workspace-switch-create): Move support for creating missing
workspaces from the former to the latter..
(exwm-workspace-switch-create-limit): New variable limiting the number
of new workspaces allowed to create each time.
* exwm-workspace.el (exwm-workspace--prompt-add)
(exwm-workspace--prompt-delete): New commands for adding and deleting
workspaces from the `read-from-minibuffer' prompt.
(exwm-workspace--prompt-add-allowed)
(exwm-workspace--prompt-delete-allowed): New variables telling whether
the above two commands are allowed to run.
(exwm-workspace--switch-map): Change "+" / "-" to use the new commands.
* exwm-workspace.el (exwm-workspace-switch, exwm-workspace-swap)
(exwm-workspace-move-window): Use this new feature.
* exwm-workspace.el (exwm-workspace-add, exwm-workspace-delete): Since
they are not used by the keymap any more, drop the use of idle timer.
* exwm-workspace.el (exwm-workspace--create-silently): New variable
indicating whether new workspaces should be created in the background.
(exwm-workspace--add-frame-as-workspace): Support creating new
workspaces in the background.
* exwm-workspace.el (exwm-workspace--on-ConfigureNotify):
Update workareas if it's not up to date.
* exwm-randr.el (exwm-randr--refresh): Raise the standalone minibuffer
when refreshed.
* exwm-config.el (exwm-config-default): Add `exwm-workspace-number' and
`exwm-workspace-switch-create'.
* exwm-core.el (exwm-mode-menu, exwm-mode-map): Add workspace
attach/detach commands.
* exwm-workspace.el (exwm-workspace--add-frame-as-workspace):
Cleanup containers.
* exwm-workspace.el (exwm-workspace--update-ewmh-props): Create the
frame in size 1x1 (Lucid build does no support zero sized frames).
* exwm-workspace.el (exwm-workspace--post-init): Reset the 'fullscreen'
frame parameter for emacsclient.
